A New Life For Nitrile-Butadiene Rubber: Co-Harnessing Metathesis And Condensation For Reincorporation Into Bio-Based Materials

Efficient plastic recycling processes are crucial for the production of value-added products or intermediates. Here, we present a multicatalytic route that allows the degradation of nitrile-butadiene rubber, cross-metathesis of the formed oligomers, and polymerization of the resulting dicarboxylic acids with bio-based diols, providing direct access to unsaturated polyesters. This one-pot approach combines the use of commercially available catalysts that are active and selective under mild conditions to synthesize renewable copolymers without the need to isolate intermediates.

Heterogeneously catalyzed decarbonylation of thioesters by supported Ni, Pd, or Rh nanoparticle catalysts

Decarbonylation of thioesters has been actively studied using homogeneous metal catalysts as an attractive approach for synthesizing thioethers, which are widely utilized in various fields, because decarbonylation ideally requires no additives and produces CO as the sole theoretical byproduct. However, heterogeneously catalyzed decarbonylation of thioesters has not been reported to date, despite its importance for the construction of environmentally-friendly and practical catalytic systems. This study demonstrated a heterogeneously catalyzed system for the decarbonylation of various aryl thioesters to produce thioethers and CO by utilizing CeO2- or hydroxyapatite-supported Ni, Pd, or Rh nanoparticle catalysts. The Ni catalysts showed high catalytic activity, while the Pd catalysts possessed excellent functional group tolerance. The Rh catalysts were suitable for the selective decarbonylation of unsymmetrically substituted thioesters.

Heterogeneously Catalyzed Selective Acceptorless Dehydrogenative Aromatization to Primary Anilines from Ammonia via Concerted Catalysis and Adsorption Control

Although catalytic dehydrogenative aromatization from cyclohexanones and NH₃ is an attractive synthetic method for primary anilines, using a hydrogen acceptor was indispensable to achieve satisfactory levels of selectivity in liquid-phase organic synthetic systems without photoirradiation. In this study, we developed a highly selective synthesis of primary anilines from cyclohexanones and NH₃ via efficient acceptorless dehydrogenative aromatization heterogeneously catalyzed by an Mg(OH)₂-supported Pd nanoparticle catalyst in which Mg(OH)₂ species are also deposited on the Pd surface. The basic sites of the Mg(OH)₂ support effectively accelerate the acceptorless dehydrogenative aromatization via concerted catalysis, suppressing the formation of secondary amine byproducts. In addition, the deposition of Mg(OH)₂ species inhibits the adsorption of cyclohexanones on the Pd nanoparticles to suppress phenol formation, achieving the desired primary anilines with high selectivity.

High-efficient and rapid removal of anionic and cationic dyes using a facile synthesized sole adsorbent NiAlFe-layered triple hydroxide (LTH)

It would be extremely momentous to familiarize a low-cost sole adsorbent NiAlFe-layered triple hydroxides (LTHs) having a strong sorption affinity towards both anionic and cationic dyes. Using the urea hydrolysis hydrothermal method LTHs were fabricated and by altering the ratio of participant metal cations the adsorbent was optimized. BET analysis revealed that the optimized LTHs possess an elevated surface area (160.04 m²/g) while TEM and FESEM analysis portrayed the stacked sheets-like 2D morphology. LTHs were employed for the amputation of anionic congo red (CR) and cationic brilliant green (BG) dye. The adsorption study showed that within 20 and 60 min, respectively, maximum adsorption capacities were achieved at 57.47 mg/g and 192.30 mg/g for CR and BG dye. Adsorption isotherm, kinetics, and thermodynamics study revealed that both chemisorptions with physisorptions were the assertive factor for the dye encapsulation. This enhanced adsorption performance of the optimized LTH for the anionic dye is attributed to its inherent anions exchange properties and new bond formation with the adsorbent skeleton. Whereas for the cationic dye, it was because of the formation of strong hydrogen bonds, and electrostatic interaction. Morphological manipulation of LTHs, formulates the optimized adsorbent LTH111, provokes the adsorbent for this elevated adsorption performance. Overall, this study revealed that LTHs have a high potential for the effectual remediation of dyes from wastewater as a sole adsorbent at a low cost.

Phosphorus containing layered quadruple hydroxide electrode materials on lab waste recycled flexible current collector

From environmental waste to energy storage, waste boxes converted into conductive electrodes to further grow active materials has been an interesting way of upcycling. In this study, we transformed waste boxes of KIMTECH Kimwipes® into conductive f-MWCNTs light and flexible substrate (LFS) as current collectors. Then, undoped and P-doped active materials consisting of layered quadruple hydroxides (LQH) was successfully grown on the conductive f-MWCNTs/LFS. Specifically, P-doped f-MWCNTs/LQH demonstrates 1.8 times the capacitance of an undoped f-MWCNTs/LQH. Such conversion of waste boxes not only offers a useful way of reusing waste papers which commonly ends in landfills, but the inexpensive method also offers an extreme way of cutting cost in developing conductive substrates. Also, the effective strategy of synthesizing active materials on the conductive f-MWCNTs/LFS paves its way as potential cheap electrodes of the future generation.

Acid Treated Montmorillonite—Eco-Friendly Clay as Catalyst in Carvone Isomerization to Carvacrol

Acid-treated montmorillonites (MMT) were used as catalysts of carvone isomerization to carvacrol. Mineral acids—sulfuric, hydrochloric, nitric acids and organic acids (acetic and chloroacetic)—were used for the acid treatment. Prepared materials were characterized by available characterization methods, namely XRD, EA, TPD, TPO, UV-Vis, laser light scattering and nitrogen physisorption. The structure of montmorillonite remained intact after treatment. However, TPD proved the increase of acidity of acid-treated materials comparing pure montmorillonite. All materials were tested in the isomerization of carvone, producing carvacrol as the desired product. The initial reaction rate increased using the materials in the row MMT-COOH < MMT-HNO3 < MMT-ClCOOH < MMT-H2SO4 < MMT-HCl, which is in accordance with the pKa of acids used for the treatment. The number of weak acid sites strongly influenced the selectivity to carvacrol. The optimal solvent for the reaction was toluene. Total conversion of carvone and the selectivity to carvacrol 95.5% was achieved within 24 h under 80 °C, with toluene as solvent and montmorillonite treated by chloroacetic acid as catalyst. The catalyst may be reused after calcination with only a low loss of activity.

Dehydrogenative Coupling of Alkanes and Benzene Enhanced by Slurry-Phase Interparticle Hydrogen Transfer

The dehydrogenative coupling reaction of alkanes and benzene has attracted attention as a method of direct conversion of alkanes to raw materials for useful chemical products. Here, we report the first combined catalyst system composed of hydrotalcite-supported palladium and solid acid aluminum-exchanged montmorillonite for the direct alkylation of benzene promoted by slurry-phase interparticle hydrogen transfer at 150 °C. The combination of the two catalytic particles showed excellent activity and achieved the maximum benzene conversion of 21% and target product selectivity of 84% in the reaction of n-heptane and benzene. Our results, thus, provide a feasible strategy to design efficient liquid-phase reaction systems employing simple physical mixing of two catalytic particles.

Coupling without Coupling Reactions: En Route to Developing Phenols as Sustainable Coupling Partners via Dearomatization-Rearomatization Processes

Transition-metal-catalyzed cross-coupling reactions represent one of the most straightforward and efficient protocols to assemble two different molecular motifs for the construction of carbon-carbon or carbon-heteroatom bonds. Because of their importance and wide applications in pharmaceuticals, agrochemicals, materials, etc., cross-coupling reactions have been well recognized in the 2010 Nobel Prize in chemistry. However, in the classical transition-metal-catalyzed cross-coupling reactions (e.g., the Suzuki-Miyaura, the Buchwald-Hartwig, and the Ullmann cross-coupling reactions), organohalides, which mainly stem from the nonrenewable fossil resources, are often utilized as coupling partners with halide wastes being generated after the reactions. To make cross-coupling reactions more sustainable, we initiated a general research program by employing phenols and cyclohexa(e)nones (the reduced forms of phenols) as pivotal feedstocks (coupling partners), instead of the commonly used fossil-derived organohalides, for cross-coupling reactions to build C-O, C-N, and C-C bonds. Phenols (cyclohexa(e)nones) are widely available and can be obtained from lignin biomass, highlighting their renewable and sustainable features. Moreover, water is expected to be the only stoichiometric byproduct, thus avoiding halide wastes.Notably, the cross-coupling reactions utilizing phenols/cyclohexa(e)nones are not based on the traditional transition-metal-catalyzed "oxidative-addition and reductive-elimination" mechanism, but via a novel "phenol-cyclohexanone" redox couple. This new working mechanism opens up new horizons of designing cross-coupling reactions via simple nucleophilic addition of cyclohexanones along with aromatization processes, thereby simplifying the design and avoiding laborious optimization of transition-metal precursors (e.g., Pd, Ni, Cu, etc.), as well as ligands in classical transition-metal-catalyzed cross-coupling reactions. Specifically, in this Account, we will summarize and discuss our related research work in the following three categories: "formal oxidative couplings of cyclohexa(e)nones", "formal reductive couplings of phenols", and "formal redox-neutral couplings of phenols". The successes of these research projects clearly demonstrated our initial inspirations and rational designs to develop cross-coupling reactions without the "conventional cross-coupling conditions" by pushing the reaction frontiers from initial cyclohexanones, ultimately, to the sustainable phenol targets.

Palladium-Catalyzed Regioselective Coupling Cyclohexenone into Indoles: Atom-Economic Synthesis of β-Indolyl Cyclohexenones and Derivatization Applications

Herein, we report a palladium-catalyzed dehydrogenative cross-coupling of indoles with cyclic enones to give β-indolyl cyclic enones under mild and neutral reaction conditions. The key to the success is to explore a mild condition, which ensures the indole C-H activation and subsequent syn β-hydride elimination through rapid enolization isomerization of Pd(II)-enolate while suppressing other undesired side reactions. Synthetic utility has also been demonstrated in the flexible transformation of the coupling products to meta-phenols and benzo[a]carbazoles.

Arylation of indoles using cyclohexanones dually-catalyzed by niobic acid and palladium-on-carbons

3-Arylindoles were easily constructed from indoles and cyclohexanone derivatives using a combination of catalytic niobic acid-on-carbon (Nb₂O₅/C) and palladium-on-carbon (Pd/C) under heating conditions without any oxidants. The Lewis acidic Nb₂O₅/C promoted the nucleophilic addition of indoles to the cyclohexanones, and the subsequent dehydration and Pd/C-catalyzed dehydrogenation produced the 3-arylindoles. The additive 2,3-dimethyl-1,3-butadiene worked as a hydrogen acceptor to facilitate the dehydrogenation step.

Synthesis of unsymmetrically substituted triarylamines via acceptorless dehydrogenative aromatization using a Pd/C and p-toluenesulfonic acid hybrid relay catalyst

An efficient and convenient procedure for synthesizing triarylamines based on a dehydrogenative aromatization strategy has been developed. A hybrid relay catalyst comprising carbon-supported Pd (Pd/C) and p-toluenesulfonic acid (TsOH) was found to be effective for synthesizing a variety of triarylamines bearing different aryl groups starting from arylamines (diarylamines or anilines), using cyclohexanones as the arylation sources under acceptorless conditions with the release of gaseous H₂. The proposed reaction comprises the following relay steps: condensation of arylamines and cyclohexanones to produce imines or enamines, dehydrogenative aromatization of the imines or enamines over Pd nanoparticles (NPs), and elimination of H₂ from the Pd NPs. In this study, an interesting finding was obtained indicating that TsOH may promote the dehydrogenation.

An efficient and convenient procedure for synthesizing triarylamines based on a dehydrogenative aromatization strategy has been developed.

Catalytic dehydrogenative aromatization of cyclohexanones and cyclohexenones

Prompted by the scant attention paid by published literature reviews to the comprehensive catalytic dehydrogenative aromatization of cyclohexa(e)nones, this review describes recent methods developed to-date involving transition-metal-catalyzed oxidative aromatization and metal-free strategies for the transformation of cyclohexa(e)nones to substituted phenols.

Formal arylation of NH3 to produce diphenylamines over supported Pd catalysts

In the presence of Pd/Al₂O₃, various diphenylamines could be synthesized through acceptorless formal arylation using urea as a nitrogen source and cyclohexanones as arylation sources.