Dual-Functional Coordination Polymer with High Proton Conductivity and a Low-Detection-Limit Fluorescent Probe

A coordination polymer with dual functions of high proton conductivity and highly sensitive fluorescent sensors demonstrates a great application potential. In this work, a cadmium-based coordination polymer (denoted as CP 1) with hydrothermal stability was synthesized. The abundant coordination water, lattice water, and amino groups make an extended hydrogen-bonding pathway for efficient proton migration, which endows CP 1 with the highest proton conductivity of 2.41 × 10^-3 S·cm^-1 at 353 K and 98% RH. Especially, the proton conductivity of the chitosan (CS) hybrid membrane containing CP 1 reaches a maximum value of 2.62 × 10^-2 S·cm^-1 under 343 K and 98% RH, which increases almost 7 times higher than that of the pure CS membrane due to the host-guest collaboration. Furthermore, luminescence studies revealed that CP 1 is a high-sensitivity and good-selectivity fluorescent probe for the detection of trace amounts of l-histidine with a lowest detection limit of 1.0 × 10^-8 M.

Multiple Strategies to Fabricate a Highly Stable 2D CuIICuI-Organic Framework with High Proton Conductivity

Using multifunctional organic ligands with multiple acidic groups (carboxylate and sulfonate groups) to synthesize metal-organic frameworks (MOFs) bearing effective H-bond networks is a promising strategy to obtain highly proton conductive materials. In this work, a highly stable two-dimensional MOF, [Cu^II₅Cu^I₂(μ₃-OH)₄(H₂O)₆(L)₂(H₂L)₂]·3H₂O (denoted as YCu161; H₃L = 6-sulfonaphthalene-1,4-dicarboxylic acid) containing mixed-valence [Cu^II₅Cu^I₂(μ₃-OH)₄]⁸⁺ subunits, was successfully prepared. It exhibited excellent stability and temperature- and humidity-dependent proton conduction properties. Its optimal proton conductivity reached 1.84 × 10^-3 S cm^-1 at 90 °C and 98% relative humidity. On the basis of a crystal structure analysis, water vapor adsorption test results, and activation energy calculations, we deduced the proton conduction pathway and mechanism. Apparently, uncoordinated sulfonic and carboxyl groups and a network of abundant H-bonds inside the framework were responsible for the efficient proton transfer. Therefore, the strategy of selecting suitable bifunctional ligands to construct two-dimensional Cu-cluster-based MOFs with excellent proton conductivity is feasible.

Metal-organic frameworks as proton conductors: strategies for improved proton conductivity

Recent studies on proton conductivity using pristine MOFs and their composite materials have established an outstanding area of research owing to their potential applications for the development of high performance solid state proton conductors (SSPCs) and proton exchange membranes (PEMs) in fuel cells (FCs). MOFs, as crystalline organic and inorganic hybrid materials, provide a large number of degrees of freedom in their framework composition, coordination environment, and chemically functionalized pores for the targeted design of improved proton carriers, functioning over a wide range of temperature and humidity conditions. Herein, our efforts have been emphasized on fundamental principles and different design strategies to achieve enhanced proton conductivity with appropriate examples. We also have discussed the modification mechanism of MOF-composite materials and mixed matrix membranes for commercial applications in FCs. Thus, this review aims to direct readers' attention towards the design strategies and structure-property relationship for proton transport in MOFs.

Multivariate Sulfonic-Based Titanium Metal-Organic Frameworks as Super-protonic Conductors

The proton-conducting performances of a microporous Ti-based metal-organic framework (MOF), MIP-207, were successfully tuned using a multicomponent ligand replacement strategy to gradually introduce a controlled amount of sulfonic acid groups as a source of Brönsted acidic sites while keeping the robustness and ecofriendly synthesis conditions of the starting material. Typically, multivariate sulfonic-based solids MIP-207-(SO₃H-IPA)_x-(BTC)_1-x were prepared by combining various ratios of trimesate 1,3,5-benzenetricarboxylate (BTC) moieties and 5-SO₃H-isophthalate (SO₃H-IPA). The best sulfonic-MOF candidate that combines structural integrity with high proton conductivity values (e.g., σ = 2.6 × 10^-2 S cm^-1 at 363 K/95% relative humidity) was further investigated using ab initio molecular dynamics simulations. These calculations supported that the -SO₃H groups act as proton donors and revealed that the proton transfer mechanism results from the solvation structure of protons through the fast Zundel/hydronium interconversion along the continuous H-bonded network connecting the adsorbed water molecules.

Rational incorporation of defects within metal-organic frameworks generates highly active electrocatalytic sites

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control. An emerging strategy to generate coordinatively-unsaturated active sites is through the use of organic linkers that lack a functional group that would usually bind with the metal nodes. To execute this strategy, we synthesize a model MOF, Ni-MOF-74 and incorporate a fraction of 2-hydroxyterephthalic acid in place of 2,5-dihydroxyterephthalic acid. The defective MOF, Ni-MOF-74D, is evaluated vs. the nominally defect-free Ni-MOF-74 with a host of ex situ and in situ spectroscopic and electroanalytical techniques, using the oxidation of hydroxymethylfurtural (HMF) as a model reaction. The data indicates that Ni-MOF-74D features a set of 4-coordinate Ni–O₄ sites that exhibit unique vibrational signatures, redox potentials, binding motifs to HMF, and consequently superior electrocatalytic activity relative to the original Ni-MOF-74 MOF, being able to convert HMF to the desired 2,5-furandicarboxylic acid at 95% yield and 80% faradaic efficiency. Furthermore, having such rationally well-defined catalytic sites coupled with in situ Raman and infrared spectroelectrochemical measurements enabled the deduction of the reaction mechanism in which co-adsorbed *OH functions as a proton acceptor in the alcohol oxidation step and carries implications for catalyst design for heterogeneous electrosynthetic reactions en route to the electrification of the chemical industry.

The allure of metal–organic frameworks (MOFs) in heterogeneous electrocatalysis is that catalytically active sites may be designed a priori with an unparalleled degree of control.

Tuning the Properties of MOF-808 via Defect Engineering and Metal Nanoparticle Encapsulation

Defect engineering and metal encapsulation are considered as valuable approaches to fine‐tune the reactivity of metal–organic frameworks. In this work, various MOF‐808 (Zr) samples are synthesized and characterized with the final aim to understand how defects and/or platinum nanoparticle encapsulation act on the intrinsic and reactive properties of these MOFs. The reactivity of the pristine, defective and Pt encapsulated MOF‐808 is quantified with water adsorption and CO₂ adsorption calorimetry. The results reveal strong competitive effects between crystal morphology and missing linker defects which in turn affect the crystal morphology, porosity, stability, and reactivity. In spite of leading to a loss in porosity, the introduction of defects (missing linkers or Pt nanoparticles) is beneficial to the stability of the MOF‐808 towards water and could also be advantageously used to tune adsorption properties of this MOF family.

Phase Transformation Dynamics in Sulfate-Loaded Lanthanide Triphosphonates. Proton Conductivity and Application as Fillers in PEMFCs

Phase transformation dynamics and proton conduction properties are reported for cationic layer-featured coordination polymers derived from the combination of lanthanide ions (Ln3+) with nitrilo-tris(methylenephosphonic acid) (H6NMP) in the presence of sulfate ions. Two families of materials are isolated and structurally characterized, i.e., [Ln2(H4NMP)2(H2O)4](HSO4)2·nH2O (Ln = Pr, Nd, Sm, Eu, Gd, Tb, Er, Yb; n = 4-5, Series I) and [Ln(H5NMP)]SO4·2H2O (Ln = Pr, Nd, Eu, Gd, Tb; Series II). Eu/Tb bimetallic solid solutions are also prepared for photoluminescence studies. Members of families I and II display high proton conductivity (10-3 and 10-2 S·cm-1 at 80 °C and 95% relative humidity) and are studied as fillers for Nafion-based composite membranes in PEMFCs, under operating conditions. Composite membranes exhibit higher power and current densities than the pristine Nafion membrane working in the range of 70-90 °C and 100% relative humidity and with similar proton conductivity.

Water adsorption fingerprinting of structural defects/capping functions in Zr-fumarate MOFs: a hybrid computational-experimental approach

Engineering structural defects in MOFs has been intensively applied to modulate their adsorption-related properties. Zr-fumarate MOF (also known as MOF-801) is a prototypical defective MOF with proven versatile adsorption/separation performances depending on the synthetic conditions, however the relationship between the nature/concentration of both structure defects/capping functions and its adsorption features is still far from being fully understood. In this work, we first present a systematic theoretical exploration of the individual contributions of linker and cluster defects as well as of the capping functions to the overall water adsorption profile of the MOF-801 framework. This computational effort based on the construction of defective structure models and the use of Grand Canonical Monte Carlo simulations further enabled the identification of the overarching defective structure for two MOF-801 samples based on their experimental adsorption isotherms reported previously. An experimental effort was then deployed to synthesize two Zr-fumarate MOF samples with controlled nature and concentration of structural defects as well as capping functions. This computational-experimental hybrid strategy revealed the water adsorption isotherm as a fingerprint of the nature and concentration of structural defect/capping groups exhibited by the MOF adsorbent. We expect this study to deliver meaningful insights to further design MOFs with target adsorption features through a rational engineering of structural defects.

Metal–organic frameworks derived from a semi-rigid anthracene-based ligand and sulfonates: proton conductivity and dye degradation studies

The MOFs were constructed by ligand AHP and sulfonate analogues. MOF4 exhibits a high proton conductivity of 1.95 × 10⁻³ S cm⁻¹ at 95 °C and 98% relative humidity. MOFs 1–5 also serve as photocatalysts for methylene blue degradation.

Self-sacrificed construction of defect-rich ZnO@ZIF-8 nanocomposites with enhanced photocurrent properties

An in situ self-sacrificed template strategy was used to construct core–shell structured defective ZnO@ZIF-8 nanocomposites with enhanced photocurrent properties.

Two topologically different 3D CuII metal-organic frameworks assembled from the same ligands: control of reaction conditions

Bifunctional ligands containing both carboxylic and sulfonate groups can adopt versatile coordination modes to produce novel metal-organic frameworks (MOFs) with high-dimensional networks and interesting topologies. Using 2,2'-disulfonylbiphenyl-4,4'-dicarboxylic acid (H₄L) as a linker and 4,4'-bipyridine (4,4'-bpy) as a co-ligand, two novel 3D Cu^II MOFs, {[Cu₂(L)(4,4'-bpy)_2.5(H₂O)]·1.7H₂O}_n, (1), and {[Cu₂(L)(4,4'-bpy)₂]·DMA·3H₂O}_n, (2), have been synthesized and structurally characterized by X-ray crystallography (DMA is N,N-dimethylacetamide). MOF (1) shows an unprecedented trinodal 4,4,5-connected topology network with the Schläfli symbol (4.6².7³)(4³.6⁵.7.8)(6.7³.8.10), while MOF (2) indicates a binodal 4,6-connected fsc network with the Schläfli symbol (4⁴.6¹⁰.8)(4⁴.6²). MOFs (1) and (2) were further characterized by elemental analysis, IR spectroscopy, powder X-ray diffraction and thermogravimetric analysis. MOF (1) shows a high water and chemical stability. The proton conductivity of (1) and CO₂ adsorption of (2) were also investigated.

Synthesis and Applications of Porous Organosulfonate-Based Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are an emerging class of porous crystalline materials attracting attention for their vast array of topologies as well as potential applications in gas storage, heterogeneous catalysis, and molecular sensing. In most cases, organocarboxylates (or corresponding carboxylic acids) are the most common building block, achieving well-defined metal-carboxylate coordination motifs in MOF structures. However, organosulfonates (or corresponding sulfonic acids) have been less well studied in MOF chemistry, probably owing to the weak coordination tendency of the sulfonate oxygens toward metal centers. This review summarizes the research on organosulfonate-based porous crystalline MOFs in recent years. The construction of most porous organosulfonate MOFs relies on using either a second N-donor ligand or carboxylate-sulfonate bifunctional ligands. Despite occupying more confined porosity than the carboxylate counterpart, the permanent porosity in organosulfonate MOFs is often highly polar and hydrophilic. Thus, organosulfonate MOFs often exhibit improved proton/Li⁺ conductivity as well as CO₂ affinity compared with their carboxylate-based counterparts. In addition, the application of organosulfonate MOFs in molecular sensing, molecular sieving, catalysis, and anion exchange are discussed in this review as well.

High proton conductivity in a nickel(ii) complex and its hybrid membrane

A novel 2D nickel(ii) complex (1) has been successfully synthesized using a 2,2′-bipyridyl, polycarboxylsulfonate ligand H₄SBTC and Ni²⁺ ions. Owing to the presence of abundant water molecules, hydrogen bond networks and other protons, 1 and its hybrid membranes demonstrate high proton conductivity.

A robust zirconium amino acid metal-organic framework for proton conduction

Proton conductive materials are of significant importance and highly desired for clean energy-related applications. Discovery of practical metal-organic frameworks (MOFs) with high proton conduction remains a challenge due to the use of toxic chemicals, inconvenient ligand preparation and complication of production at scale for the state-of-the-art candidates. Herein, we report a zirconium-MOF, MIP-202(Zr), constructed from natural α-amino acid showing a high and steady proton conductivity of 0.011 S cm^-1 at 363 K and under 95% relative humidity. This MOF features a cost-effective, green and scalable preparation with a very high space-time yield above 7000 kg m^-3 day^-1. It exhibits a good chemical stability under various conditions, including solutions of wide pH range and boiling water. Finally, a comprehensive molecular simulation was carried out to shed light on the proton conduction mechanism. All together these features make MIP-202(Zr) one of the most promising candidates to approach the commercial benchmark Nafion.

Multifunctional Behavior of Sulfonate-Based Hydrolytically Stable Microporous Metal-Organic Frameworks

An isostructural pair of extremely rare, permanently microporous sulfonate-based metal-organic frameworks (MOFs) having a novel topology has been reported here by integration of rationally chosen building units. The compounds bear polar sites in the pore surfaces and exhibit selective adsorption of CO₂, which features among the highest reported uptakes in the domain of organosulfonate-based MOFs. The compounds also exhibit multifunctionality for C₆-cyclic hydrocarbon separation and selective detection of neurotransmitter nitric oxide. Such multifunctional behavior on the basis of permanent porosity has been rarely observed for sulfonate-based MOFs. The efficacy of the synthesis approach is further highlighted by the resistance over a wide pH range and promising feasibility of reticular chemistry in porous organosulfonate-based systems.

Functionalization of Metal-Organic Frameworks for Photoactive Materials

Metal-organic frameworks (MOFs) are intriguing platforms with multiple functionalities. Additional functionalization of MOFs generates novel materials for various applications. Here, three main topics are examined regarding the functionalization of MOFs for use as photoactive materials. The first is chemical approaches for postsynthetic modification of the metal clusters and organic linkers in MOFs; that is, sites on pore surfaces and chemical trapping of photoactive moieties within the pores, which create materials with chemical functionalities for water splitting and CO₂ reduction by light. The second topic focuses on the functionalization of MOFs for photochemical response and the versatile applications of such materials. State-of-the-art research on functionalizing MOFs through photochemical reactions on the pore surface and within the pores as guests is also summarized. The third topic introduces the functionalization of MOFs for photofunctional materials, including photoluminescent tuning and integration, photoluminescent LED devices and barcodes, and photophysical applications for chemical sensing. Finally, conclusions and perspectives on the fields are given.

3D isomorphous lanthanide coordination polymers displaying magnetic refrigeration, slow magnetic relaxation and tunable proton conduction

Four lanthanide 3D coordination frameworks with 1D hydrophilic channels along the crystallographic c direction have been investigated for their proton conduction and magnetic properties.

Exfoliation of a two-dimensional cationic inorganic network as a new paradigm for high-capacity CrVI-anion capture

This work represents the selective capture of the aqueous Cr^VI-anions in record capacityviathein situexfoliation of a rare cationic copper hydroxide material.