Covalently Linked 2D-Co3O4/GO Heterostructures: Catalytic and Electrochemical Properties

Covalently cross-linked 2D heterostructures may represent a ground-breaking approach to creating materials with multifunctionalities. To date, however, this field still remains relatively unexplored. In the present work, Co3O4/GO covalently linked heterostructures (Co3O4/GO-CL) were produced using 2D-Co3O4 functionalized with (3-aminopropyl)triethoxysilane (APTES) to react with the carboxyl groups of graphene oxide (GO). The surface and interface properties of the final material were assessed through electrochemical and catalytic studies. We found that the covalent bonds lead to a self-standing and ordered final structure, not observed for the noncovalent material (Co3O4/GO-nCL), also produced for comparison. The catalytic activity of Co3O4/GO-CL over the degradation of Rhodamine 6G showed great performance and the possibility of recycling the catalyst. Electrochemical evaluation stated higher specific capacitance for the covalently bonded material (468 F g-1 against 110 F g-1). Overall, results showed that the covalent bonds may be improving charge-transfer and interfacial area features, thus leading to enhanced catalytic and electrochemical performances.

Rhombohedrally stacked layered transition metal dichalcogenides and their electrocatalytic applications

Layered transition metal dichalcogenides (TMDCs) are extensively investigated as catalyst materials for a wide range of electrochemical applications due to their high surface area and versatile electronic and chemical properties. Bulk TMDCs are van der Waals solids that possess strong in-plane bonding and weak inter-layer interactions. In the few-layer 2D TMDCs, several polymorphic structures have been reported as each individual layer can either retain octahedral or trigonal prismatic coordination. Among them, 1T (tetragonal), 2H (hexagonal) and 3R (rhombohedral) phases are very common. These polymorphs can display discrepancies in their catalytic activity as their electronic structure diverges due to different d orbital filling states. The broken inversion symmetry and large exposed edge sites of some of the 3R-phase TMDCS such as MoS2, NbS2 and TaS2 appear to be advantageous for electrocatalytic water reduction and battery applications. We describe recent studies in phase engineering of 2D TMDCs, particularly aiming at the 3R polytype and their electrocatalytic properties. Redox ability primarily depends on a distinct polymorphic phase in which TMDCs are isolated, and hence, with rich polymorphic structures being reported, numerous new catalytic applications can be realized. Phase conversion from 2H to 3R phase in some TMDCs enhances structural integrity and establishes robustness under harsh chemical conditions.

'Donor-acceptor', 'interpenetrating polymer network' and 'electrostatic self-assembly' work in tandem to achieve extraordinary specific shielding effectiveness

The exploration of 'electrostatic self-assembly' on solid surfaces has garnered significant interest across various fields. With the sophistication of gadgets, managing electromagnetic interference (EMI) from stray signals, especially in stealth applications, necessitates materials that can absorb microwaves. A promising approach involves integrating lightweight self-healing polymeric materials. This study employs electrostatic self-assembly to design a carbon nanotube structure on an interpenetrating polymer network (IPN) made of PVDF and bismaleimide (BMI)-grafted dopamine hydrochloride, enhancing mechanical integrity through well-formed IPNs. Graphene oxide (GO) is introduced before IPN formation to facilitate an 'acceptor-donor' interaction via the Diels-Alder adduct between BMI and GO, which binds with multi-walled carbon nanotubes (MWCNTs). MWCNTs, modified with PQ7 or PDDA for a positive charge, self-assemble onto the IPN-GO construct, creating a lightweight and chemically stable structure capable of absorbing electromagnetic radiation. The 21 μm thick construct exhibits enhanced microwave absorption within the X-band (8.2-12.4 GHz), with a specific shielding effectiveness of 8637 dB cm2 g-1 and a green index (gs ≈ 1.41). The construct is coated with self-healable polyetherimide (PEI) containing exchangeable disulfide bonds to address maintenance challenges, providing heat-triggered self-healing properties. These innovative structures offer solutions for 5G and IoT applications where lightweight, durable, and multifunctional properties are essential for effectively shielding electronic devices from stray signals.

Ambient microdroplet annealing of nanoparticles

Conversion of polydisperse nanoparticles to their monodisperse analogues and formation of organized superstructures using them involve post synthetic modifications, and the process is generally slow. We show that ambient electrospray of preformed polydisperse nanoparticles makes them monodisperse and the product nanoparticles self-assemble spontaneously to form organized films, all within seconds. This phenomenon has been demonstrated with thiol-protected polydisperse silver nanoparticles of 15 ± 10 nm diameter. Uniform silver nanoparticles of 4.0 ± 0.5 nm diameter were formed after microdroplet spray, and this occurred without added chemicals, templates, and temperature, and within the time needed for electrospray, which was of the order of seconds. Well organized nanoparticle assemblies were obtained from such uniform particles. A home-made and simple nanoelectrospray set-up produced charged microdroplets for the generation of such nanostructures, forming cm² areas of uniform nanoparticles. A free-standing thin film of monodisperse silver nanoparticles was also made on a liquid surface by controlling the electrospray conditions. This unique method may be extended for the creation of advanced materials of many kinds.

Polydisperse silver nanoparticles were converted to a highly ordered assembly of nanoparticles by microdroplet-induced chemistry, under ambient conditions, within seconds.

Recent progress in metal-organic framework/graphene-derived materials for energy storage and conversion: design, preparation, and application

Graphene or chemically modified graphene, because of its high specific surface area and abundant functional groups, provides an ideal template for the controllable growth of metal-organic framework (MOF) particles. The nanocomposite assembled from graphene and MOFs can effectively overcome the limitations of low stability and poor conductivity of MOFs, greatly widening their application in the field of electrochemistry. Furthermore, it can also be utilized as a versatile precursor due to the tunable structure and composition for various derivatives with sophisticated structures, showing their unique advantages and great potential in many applications, especially energy storage and conversion. Therefore, the related studies have been becoming a hot research topic and have achieved great progress. This review summarizes comprehensively the latest methods of synthesizing MOFs/graphene and their derivatives, and their application in energy storage and conversion with a detailed analysis of the structure-property relationship. Additionally, the current challenges and opportunities in this field will be discussed with an outlook also provided.

Interface chemistry of two-dimensional heterostructures - fundamentals to applications

Two-dimensional heterostructures (2D HSs) have emerged as a new class of materials where dissimilar 2D materials are combined to synergise their advantages and alleviate shortcomings. Such a combination of dissimilar components into 2D HSs offers fascinating properties and intriguing functionalities attributed to the newly formed heterointerface of constituent components. Understanding the nature of the surface and the complex heterointerface of HSs at the atomic level is crucial for realising the desired properties, designing innovative 2D HSs, and ultimately unlocking their full potential for practical applications. Therefore, this review provides the recent progress in the field of 2D HSs with a focus on the discussion of the fundamentals and the chemistry of heterointerfaces based on van der Waals (vdW) and covalent interactions. It also explains the challenges associated with the scalable synthesis and introduces possible methodologies to produce large quantities with good control over the heterointerface. Subsequently, it highlights the specialised characterisation techniques to reveal the heterointerface formation, chemistry and nature. Afterwards, we give an overview of the role of 2D HSs in various emerging applications, particularly in high-power batteries, bifunctional catalysts, electronics, and sensors. In the end, we present conclusions with the possible solutions to the associated challenges with the heterointerfaces and potential opportunities that can be adopted for innovative applications.

Covalent Cross-Linking of 2H-MoS2 Nanosheets

The combination of 2D materials opens a wide range of possibilities to create new-generation structures with multiple applications. Covalently cross-linked approaches are a ground-breaking strategy for the formation of homo or heterostructures made by design. However, the covalent assembly of transition metal dichalcogenides flakes is relatively underexplored. Here, a simple covalent cross-linking method to build 2H-MoS₂ -MoS₂ homostructures is described, using commercially available bismaleimides. These assemblies are mainly connected vertically, basal plane to basal plane, creating specific molecular sized spaces between MoS₂ sheets. Therefore, this straightforward approach gives access to the controlled connection of sulfide-based 2D materials.

Chemical Route to Twisted Graphene, Graphene Oxide and Boron Nitride

The recently discovered twisted graphene has attracted considerable interest. A simple chemical route was found to prepare twisted graphene by covalently linking layers of exfoliated graphene containing surface carboxyl groups with an amine-containing linker (trans-1,4-diaminocyclohexane). The twisted graphene shows the expected selected area electron diffraction pattern with sets of diffraction spots out with different angular spacings, unlike graphene, which shows a hexagonal pattern. Twisted multilayer graphene oxide could be prepared by the above procedure. Twisted boron nitride, prepared by cross-linking layers of boron nitride (BN) containing surface amino groups with oxalic acid linker, exhibited a diffraction pattern comparable to that of twisted graphene. First-principles DFT calculations threw light on the structures and the nature of interactions associated with twisted graphene/BN obtained by covalent linking of layers.

Pillararene-functionalised graphene nanomaterials

Pillararene-modified graphene materials integrate the advantages of both graphene and pillararenes; e.g., the cavity of pillararenes can recognise suitably sized electron-deficient and hydrophobic guest molecules via host–guest interactions, while the graphene composite is able to exhibit unique physiochemical properties including inertness, nanoscale, electrical and thermal structural properties. Those novel organic–inorganic hybrid composites can be efficiently prepared via both covalent and noncovalent bonds by classic organic reactions and supramolecular interactions, respectively. Pillararene-functionalised graphene materials have been used in various applications, such as electrochemical sensing guest molecules, performing as the platform for fluorescent probes, carrying out fluorescence quenching as the sensor, biosensing toxic molecules in cells, Raman and fluorescence bioimaging of cancer cells, photoacoustic and ultrasound imaging, as well as storage materials and reactors in energy fields.

The current research progress on diverse pillararene derivative functionalised graphene materials, including different synthesis strategies and various applications, is reviewed.

Dependence of the Properties of 2D Nanocomposites Generated by Covalent Crosslinking of Nanosheets on the Interlayer Separation: A Combined Experimental and Theoretical Study

Covalently cross-linked heterostructures of 2D materials are a new class of materials which possess electrochemical and photochemical hydrogen evolution properties. It was of considerable interest to investigate the role of interlayer spacing in the nanocomposites involving MoS₂ and graphene sheets and its control over electronic structures and catalytic properties. We have investigated this problem with emphasis on the hydrogen evolution properties of these structures by a combined experimental and theoretical study. We have linked MoS₂ based nanocomposites with other 2D materials with varying interlayer spacing by changing the linker and studied their hydrogen evolution properties. The hydrogen evolution activity for these composites decreases with increasing linker length, which we can link to a decrease in magnitude of charge transfer across the layers with increasing interlayer spacing. Factors such as the nature of the sheets, interlayer distance as well as the nature of the linker provide pathways to tune the properties of covalently cross-linked 2D material rendering this new class of materials highly interesting.

Intercalation of Layered Materials from Bulk to 2D

Intercalation in few-layer (2D) materials is a rapidly growing area of research to develop next-generation energy-storage and optoelectronic devices, including batteries, sensors, transistors, and electrically tunable displays. Identifying fundamental differences between intercalation in bulk and 2D materials will play a key role in developing functional devices. Herein, advances in few-layer intercalation are addressed in the historical context of bulk intercalation. First, synthesis methods and structural properties are discussed, emphasizing electrochemical techniques, the mechanism of intercalation, and the formation of a solid-electrolyte interphase. To address fundamental differences between bulk and 2D materials, scaling relationships describe how intercalation kinetics, structure, and electronic and optical properties depend on material thickness and lateral dimension. Here, diffusion rates, pseudocapacity, limits of staging, and electronic structure are compared for bulk and 2D materials. Next, the optoelectronic properties are summarized, focusing on charge transfer, conductivity, and electronic structure. For energy devices, opportunities also emerge to design van der Waals heterostructures with high capacities and excellent cycling performance. Initial studies of heterostructured electrodes are compared to state-of-the-art battery materials. Finally, challenges and opportunities are presented for 2D materials in energy and optoelectronic applications, along with promising research directions in synthesis and characterization to engineer 2D materials for superior devices.

Supramolecularly Bonded Layered Heterostructures Exhibiting HER Activity

van der Waals heterostructures formed by 2D materials have attracted much attention in the last few years. Recently, 2D nanosheets linked by covalent bonds have been found to exhibit novel properties. In the present study we have investigated supramolecular layered heterostructures formed by nanosheets of MoS₂ with BC₇ N, g-C₃ N₄ and graphene. These materials have been synthesized via a non-covalent host-guest synthetic design using cucurbit[8]uril (CB[8]) hosts. In addition to offering reversible disassembly, these heterostructures show good visible-light-driven hydrogen evolution reaction (HER) activity as well as reasonable gas adsorption and other properties.

Borocarbonitrides as Metal-Free Catalysts for the Hydrogen Evolution Reaction

Hydrogen generation by water splitting is clearly a predominant and essential strategy to tackle the problems related to renewable energy. In this context, the discovery of proper catalysts for electrochemical and photochemical water splitting assumes great importance. There is also a serious intent to eliminate platinum and other noble metal catalysts. To replace Pt by a non-metallic catalyst with desirable characteristics is a challenge. Borocarbonitrides, (B_x C_y N_z ) which constitutes a new class of 2D material, offer great promise as non-metallic catalysts because of the easy tunability of bandgap, surface area, and other electronic properties with variation in composition. Recently, B_x C_y N_z composites with excellent electrochemical and photochemical hydrogen generation activities have been found, especially noteworthy being the observation that B_x C_y N_z with a carbon-rich composition or its nanocomposites with MoS₂ come close to Pt in electrocatalytic properties, showing equally good photochemical activity.

A Pyrolysis-Free Covalent Organic Polymer for Oxygen Reduction

Highly efficient electrocatalysts derived from metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) for oxygen reduction reaction (ORR) have been developed. However, the subsequent pyrolysis is often needed owing to their poor intrinsic electrical conductivity, leading to undesirable structure changes and destruction of the original fine structure. Now, hybrid electrocatalysts were formed by self-assembling pristine covalent organic polymer (COP) with reduced graphene oxide (rGO). The electrical conductivity of the hybridized COP/rGO materials is increased by more than seven orders of magnitude (from 3.06×10^-9 to 2.56×10^-1  S m^-1 ) compared with pure COPs. The ORR activities of the hybrid are enhanced significantly by the synergetic effect between highly active COP and highly conductive rGO. This COP/rGO hybrid catalyst exhibited a remarkable positive half-wave (150 mV).

Synthesis, characterization, surface properties and energy device characterstics of 2D borocarbonitrides, (BN)xC1−x, covalently cross-linked with sheets of other 2D materials

Covalent cross-linking of 2D structures such as graphene, MoS₂ and C₃N₄ using coupling reactions affords the generation of novel materials with new or improved properties. These covalently cross-linked structures provide the counter point to the van der Waals heterostructures, with an entirely different set of features and potential applications. In this article, we describe the materials obtained by bonding borocarbonitride (BCN) layers with BCN layers as well as with other layered structures such as MoS₂ and C₃N₄. While cross-linking BCN layers with other 2D sheets, we have exploited the existence of different surface functional groups on the graphene (COOH) and BN(NH₂) domains of the borocarbonitrides as quantitatively determined by FLOSS. Hence, we have thus obtained two different BCN–BCN assemblies differing in the location of the cross-linking and these are designated as GG/BCN–BCN and GBN/BCN–BCN, depending on which domains of the BCN are involved in cross-linking. In this study, we have determined the surface areas and CO₂ and H₂ adsorption properties of the cross-linked structures of two borocarbonitride compositions, (BN)_0.75C_0.25 and (BN)_0.3C_0.7. We have also studied their supercapacitor characteristics and photochemical catalytic activity for hydrogen generation. The study reveals that the covalently cross-linked BCN–BCN and BCN–MoS₂ assemblies exhibit increased surface areas and superior supercapacitor performance. The BCN composite with MoS₂ also shows high photochemical HER activity besides electrochemical HER activity comparable to Pt. This observation is significant since MoS₂ in the nanocomposite is in the 2H form. The present study demonstrates the novelty of this new class of materials generated by cross-linking of 2D sheets of inorganic graphene analogues and their potential applications.

Covalent cross-linking of 2D structures such as graphene, MoS₂ and C₃N₄ using coupling reactions affords the generation of novel materials with new or improved properties.

Morphological diversity of supramolecular polymers of DNA-containing oligopyrenes – formation of chiroptically active nanosheets

Supramolecular polymerization of chimeric DNA-pyrene oligomers leads to 1D and 2D objects depending on the length of the DNA. A single guanosine induces supramolecular chirality in the self-assembled nanosheets.