Regioselective hydrogenolysis of aryl ether C-O bonds by tungsten carbides with controlled phase compositions

Dual interfacing with metallic cobalt boosts the electron shuttle of CdS-carbide nanoassemblies

Harnessing accelerated interfacial redox, thus boosting charge separation, is of great importance in photocatalytic solar hydrogen generation. In effect, nanoassembling non-noble metallic phases in CdS-based systems and elucidating their role in photocatalysis hold the key to eventually boosting electron shuttle in the field. Here we combine an efficient in-situ exsoluted metallic Co0 nanoparticles on a carbides matrix (CMG) with CdS (CdS@CoCMG) for photogeneration of hydrogen. The metallic cobalt phase exhibits strong binding at the CdS-carbide dual interfaces, forming the accelerated "electron converter" mechanism validated by charge transfer kinetics and achieving two orders of magnitude faster hydrogen production (44.42 mmol g-1 h-1) relative to CdS (0.43 mmol g-1 h-1). We propose that the unique catalyst configuration enable the directional electron-relay photocatalysis via harnessing interfaces between Co0 phase, carbides, and CdS clusters, which eventually boosts the redox process and charge separation of the integrated system, leading to high H2 production rates in the suspension.

The Deoxygenation of Jatropha Oil to High Quality Fuel via the Synergistic Catalytic Effect of Ni, W2C and WC Species

Tungsten carbide-based materials have good deoxygenation activity in the conversion of biomass. In this paper, catalysts with different nickel–tungsten carbide species were prepared by tuning the reduction temperature and Ni loading, and the effects of these different tungsten carbide species in the conversion of jatropha oil were studied. XRD, XPS, TEM, HRTEM, Raman, H2-TPR, ICP-AES were used to characterize the catalysts. The results suggested that metallic W was gradually carburized to W2C species, and W2C species was further carburized to WC species with the increase in reduction temperature and Ni loading. The obtained 10Ni10W/AC-700 catalyst exhibited outstanding catalytic performance with 99.7% deoxygenation rate and 94.5% C15-18 selectivity, which were attributed to the smallest particle size, the best dispersion, the most exposed active sites, and the synergistic effect of Ni, W2C and WC species.

Stable and Antisintering Tungsten Carbides with Controllable Active Phase for Selective Cleavage of Aryl Ether C-O Bonds

Transition-metal carbides are important materials in heterogeneous catalysis. It remains challenging yet attractive in nanoscience to construct the active phase of carbide catalysts in a controllable manner and keep a sintering-resistant property in redox reactions, especially hydroprocessing. In this work, an integrated strategy was presented to synthesize stable and well-defined tungsten carbide nanoparticles (NPs) by assembling the metal precursor onto carbon nanotubes (CNTs), wrapping a thin polymeric layer, and following a controlled carburization. The polymer served as a soft carbon source to modulate the metal/carbon ratio in the carbides and introduced amorphous carbons around the carbides to prevent the NPs from sintering. The as-built p-W_xC/CNT displayed high stability in the hydrogenolysis of aryl ether C-O bond in guaiacol for more than 150 h. Its activity was more than two and six times higher than those prepared via typical temperature-programmed reduction with gaseous carbon (W_xC/CNT-TPR) and carbothermal reduction with intrinsic carbon support (W_xC/CNT-CTR), respectively. Our p-W_xC/CNT catalyst also achieved high efficiency for selective cleavage of the aryl ether C-O bonds in lignin-derived aromatic ethers, including anisole, dimethoxylphenol, and diphenyl ether, with a robust lifespan.

Photodeposition of Pd onto TiO2 nanowires for aqueous-phase selective hydrogenation of phenolics to cyclohexanones

The selective hydrogenation of phenolics to cyclohexanones is an important process in both industrial application and utilization of fossil and renewable feedstocks. However this process remains a challenge in achieving high conversion of phenolics and high selectivity of ketones under mild reaction conditions. In this work, TiO₂ nanowires (TNWs) are successfully synthesized by using an integrated method and the ultra-small Pd clusters were then deposited onto the TNWs by photoreduction. The obtained Pd/TNW catalyst shows superior catalytic performances in the hydrogenation of phenolic derivatives to the corresponding cyclohexanones. In particular, a nearly full conversion of phenol with high selectivity (>99.0%) to cyclohexanone can be achieved at 50 °C and 5.0 bar H₂ in water. A series of characterization studies by means of XRD, XPS, EPR, FTIR, TPD, STEM, and kinetic studies indicate that abundant exposed Lewis acid and basic sites on the surface of TNWs play important roles in the activation of phenolics and desorption of cyclohexanones, while the Pd clusters by photodeposition can attain a hybrid of Pd⁰ and Pd²⁺ species to facilitate the activation of dihydrogenation. A plausible catalytic pathway with synergistic effects of TNWs and Pd species is then proposed.

Tandem Hydrogenolysis-Hydrogenation of Lignin-Derived Oxygenates over Integrated Dual Catalysts with Optimized Interoperations

The efficient hydrodeoxygenation (HDO) of lignin-derived oxygenates is essential but challenging owing to the inherent complexity of feedstock and the lack of effective catalytic approaches. A catalytic strategy has been developed that separates C-O hydrogenolysis and aromatic hydrogenation on different active catalysts with interoperation that can achieve high oxygen removal in lignin-derived oxygenates. The flexible use of tungsten carbide for C-O bond cleavage and a nickel catalyst with controlled particle size for arene hydrogenation enables the tunable production of cyclohexane and cyclohexanol with almost full conversion of guaiacol. Such integration of dual catalysts in close proximity enables superior HDO of bio-oils into liquid alkanes with high mass and carbon yields of 27.9 and 45.0 wt %, respectively. This finding provides a new effective strategy for practical applications.

Tungsten-based catalysts for lignin depolymerization: the role of tungsten species in C–O bond cleavage

Tungsten-based catalysts with designed tungsten species are synthesized and the role of each species in hydrocracking of both lignin model compounds and real lignin is deeply studied.