In situ generated 2,5-pyrazinedicarboxylate and oxalate ligands leading to a Eu-MOF for selective capture of C2H2 from C2H2/CO2

The separation of C2H2/CO2 mixtures is a very important but highly challenging task due to their comparable physical natures and relative sizes. Herein, we report a europium-based 3D microporous MOF with a 4-connected two-nodal net with {4·53·62}2{42·62·82} topology, {[Eu2(pzdc)(ox)2(H2O)4]·5H2O}n (1) (H2pzdc = 2,5-pyrazinedicarboxylic acid, H2ox = oxalic acid), prepared by a hydrothermal method involving in situ generation of 2,5-pyrazinedicarboxylate and oxalate ligands. Two different temperatures were utilized to create two porous materials (1a and 1b) with channels of 4.8 × 5.4 Å and 4.1 × 6.3 Å, and 4.8 × 5.4 and 4.6 × 8.7 Å2, respectively. 1b shows a superior ability to selectively capture C2H2 from C2H2/CO2 as compared with 1a. At 1 bar and 298 K, 1b takes up 4.10 mmol g-1 C2H2 and 1.84 mmol g-1 CO2, respectively. In addition, at 298 K and 1 bar, 1b has a high selectivity for C2H2 over CO2, with an IAST selectivity of 12.7 while the value for 1a is 3.2. The separation of C2H2/CO2 with 1b also exhibits good reusability.

Study of CHF3/CH2F2 Adsorption Separation in TIFSIX-2-Cu-i

Hydrofluorocarbons (HFCs) have important applications in different industries; however, they are environmentally unfriendly due to their high global warming potential (GWP). Hence, reclamation of used hydrofluorocarbons via energy-efficient adsorption-based separation will greatly contribute to reducing their impact on the environment. In particular, the separation of azeotropic refrigerants remains challenging, such as typical mixtures of CH2F2 (HFC-23) and CHF3 (HFC-32), due to a lack of adsorptive mechanisms. Metal-organic frameworks (MOFs) can provide a promising solution for the separation of CHF3-CH2F2 mixtures. In this study, the adsorption mechanism of CHF3-CH2F2 mixtures in TIFSIX-2-Cu-i was revealed at the microscopic level by combining static pure-component adsorption experiments, molecular simulations, and density-functional theory (DFT) calculations. The adsorption separation selectivity of CH2F2/CHF3 in TIFSIX-2-Cu-i is 3.17 at 3 bar under 308 K. The existence of similar TiF62- binding sites for CH2F2 or CHF3 was revealed in TIFSIX-2-Cu-i. Interactions between the fluorine atom of the framework and the hydrogen atom of the guest molecule were found to be responsible for determining the high adsorption separation selectivity of CH2F2/CHF3. This exploration is important for the design of highly selective adsorbents for the separation of azeotropic refrigerants.

Interaction-selective molecular sieving adsorbent for direct separation of ethylene from senary C2-C4 olefin/paraffin mixture

Olefin/paraffin separations are among the most energy-intensive processes in the petrochemical industry, with ethylene being the most widely consumed chemical feedstock. Adsorptive separation utilizing molecular sieving adsorbents can optimize energy efficiency, whereas the size-exclusive mechanism alone cannot achieve multiple olefin/paraffin sieving in a single adsorbent. Herein, an unprecedented sieving adsorbent, BFFOUR-Cu-dpds (BFFOUR = BF4-, dpds = 4,4'-bipyridinedisulfide), is reported for simultaneous sieving of C2-C4 olefins from their corresponding paraffins. The interlayer spaces can be selectively opened through stronger guest-host interactions induced by unsaturated C = C bonds in olefins, as opposed to saturated paraffins. In equimolar six-component breakthrough experiments (C2H4/C2H6/C3H6/C3H8/n-C4H8/n-C4H10), BFFOUR-Cu-dpds can simultaneously divide olefins from paraffins in the first column, while high-purity ethylene ( > 99.99%) can be directly obtained through the subsequent column using granular porous carbons. Moreover, gas-loaded single-crystal analysis, in-situ infrared spectroscopy measurements, and computational simulations demonstrate the accommodation patterns, interaction bonds, and energy pathways for olefin/paraffin separations.

Fluorinated metal-organic frameworks for gas separation

Fluorinated metal-organic frameworks (F-MOFs) as fast-growing porous materials have revolutionized the field of gas separation due to their tunable pore apertures, appealing chemical features, and excellent stability. A deep understanding of their structure-performance relationships is critical for the synthesis and development of new F-MOFs. This critical review has focused on several strategies for the precise design and synthesis of new F-MOFs with structures tuned for specific gas separation purposes. First, the basic principles and concepts of F-MOFs as well as their structure, synthesis and modification and their structure to property relationships are studied. Then, applications of F-MOFs in adsorption and membrane gas separation are discussed. A detailed account of the design and capabilities of F-MOFs for the adsorption of various gases and the governing principles is provided. In addition, the exceptional characteristics of highly stable F-MOFs with engineered pore size and tuned structures are put into perspective to fabricate selective membranes for gas separation. Systematic analysis of the position of F-MOFs in gas separation revealed that F-MOFs are benchmark materials in most of the challenging gas separations. The outlook and future directions of the science and engineering of F-MOFs and their challenges are highlighted to tackle the issues of overcoming the trade-off between capacity/permeability and selectivity for a serious move towards industrialization.

Benchmark Acetylene Binding Affinity and Separation through Induced Fit in a Flexible Hybrid Ultramicroporous Material

Structural changes at the active site of an enzyme induced by binding to a substrate molecule can result in enhanced activity in biological systems. Herein, we report that the new hybrid ultramicroporous material sql-SIFSIX-bpe-Zn exhibits an induced fit binding mechanism when exposed to acetylene, C2 H2 . The resulting phase change affords exceptionally strong C2 H2 binding that in turn enables highly selective C2 H2 /C2 H4 and C2 H2 /CO2 separation demonstrated by dynamic breakthrough experiments. sql-SIFSIX-bpe-Zn was observed to exhibit at least four phases: as-synthesised (α); activated (β); and C2 H2 induced phases (β' and γ). sql-SIFSIX-bpe-Zn-β exhibited strong affinity for C2 H2 at ambient conditions as demonstrated by benchmark isosteric heat of adsorption (Qst ) of 67.5 kJ mol-1 validated through in situ pressure gradient differential scanning calorimetry (PG-DSC). Further, in situ characterisation and DFT calculations provide insight into the mechanism of the C2 H2 induced fit transformation, binding positions and the nature of host-guest and guest-guest interactions.

The "Chemistree" of Porous Coordination Networks: Taxonomic Classification of Porous Solids to Guide Crystal Engineering Studies

New approaches to gas/vapor storage and purification are urgently needed to address the large energy footprint, cost, and/or risk associated with existing technologies. In this context, new classes of porous physisorbents, exemplified by porous coordination networks (PCNs), have emerged. There are now >100 000 entries in the Cambridge Structural Database (CSD) metal-organic framework (MOF) subset and the rate of publication, >5000 per year, grows unabatedly. The number of PCNs makes it infeasible to test all of them for sorption performance and it is therefore timely to introduce a classification approach based upon taxonomy to supplement topological classification of PCNs. This taxonomic approach complements existing databases such as the CSD and enable the design (crystal engineering) of new families of PCNs. It also categorizes existing PCNs in a manner useful to crystal engineers. The internal consistency of the taxonomic approach is verified by case studies of several well-known PCNs whereas its utility is demonstrated upon understudied topologies and hard-to-rationalize infinite rod building blocks. Overall, taxonomic classification enables a traffic light system to direct crystal engineers towards finding a "needle in haystack," that is, a family (platform) of PCNs that is amenable to crystal engineering and systematic structure/property studies.

An Unprecedented Pillar-Cage Fluorinated Hybrid Porous Framework with Highly Efficient Acetylene Storage and Separation

Despite much intense investigation on the C₂ H₂ /CO₂ separation, the trade-off between the adsorption capacity and separation selectivity is still tricky. To overcome the dilemma, we have rationally synthesized an ultra-stable fluorinated hybrid porous material SIFSIX-Cu-TPA with the ith-d topology. Completely differing from the famous pillar-layer fluorinated materials, SIFSIX-Cu-TPA possesses a unique pillar-cage structure, in which the SiF₆ ^2- anions cross-link two adjacent metal nodes as pillars to stabilize the three-dimensional framework constructed by icosahedral and tetrahedral cages. As anticipated, SIFSIX-Cu-TPA has high BET surface area (1330 m²  g^-1 ) as well as high C₂ H₂ uptake (185 cm³  g^-1 at 298 K and 1 bar). At the same time, due to the obvious difference in the adsorption performance of CO₂ and C₂ H₂ especially in the low pressure area, SIFSIX-Cu-TPA also exhibits an excellent C₂ H₂ /CO₂ separation performance (breakthrough time up to 68 min g^-1 at 298 K and 1 bar).

Construction of an Anion-Pillared MOF Database and the Screening of MOFs Suitable for Xe/Kr Separation

The separation of xenon/krypton (Xe/Kr) mixtures is a challenging process. Many porous materials allow the adsorption of both Xe and Kr but only with low selectivity. Anion-pillared metal-organic frameworks (MOFs), featuring the anion groups as structural pillars, show potential in gas separations, but only a limited number of them have been synthesized. Here, we describe a collection of 936 anion-pillared MOFs based on 22 experimentally available structures. We performed density functional theory (DFT) optimization and then assigned density-derived electrostatic and chemical (DDEC) charges for each MOF to make them well suited to molecular simulations. The structural properties of the MOFs vary more strongly with the choice of the organic ligand than with other aspects like fluorine groups and metal centers. We then screened the entire collection of MOFs in the context of Xe/Kr separation at room temperature. Compared with previously reported MOFs, the interpenetrated MOF SIFSIX-6-Cd-i is predicted to perform better for Xe/Kr separations, with a good balance between working capacity (1.62 mmol/g) and separation selectivity (16.4) at 298 K and 100 kPa. We also found that the heterogeneity of fluorine groups within a MOF can help to enhance Xe working capacity without reducing the Xe/Kr selectivity, suggesting that synthesis of anion-pillared MOFs with mixed fluorine groups may lead to improved Xe/Kr separation performance.

Simultaneous interlayer and intralayer space control in two-dimensional metal-organic frameworks for acetylene/ethylene separation

Three-dimensional metal−organic frameworks (MOFs) are cutting-edge materials in the adsorptive removal of trace gases due to the availability of abundant pores with specific chemistry. However, the development of ideal adsorbents combining high adsorption capacity with high selectivity and stability remains challenging. Here we demonstrate a strategy to design adsorbents that utilizes the tunability of interlayer and intralayer space of two-dimensional fluorinated MOFs for capturing acetylene from ethylene. Validated by X-ray diffraction and modeling, a systematic variation of linker atom oxidation state enables fine regulation of layer stacking pattern and linker conformation, which affords a strong interlayer trapping of molecules along with cooperative intralayer binding. The resultant robust materials (ZUL-100 and ZUL-200) exhibit benchmark capacity in the pressure range of 0.001–0.05 bar with high selectivity. Their efficiency in acetylene/ethylene separation is confirmed by breakthrough experiments, giving excellent ethylene productivities (121 mmol/g from 1/99 mixture, 99.9999%), even when cycled under moist conditions.

Designing efficient adsorbents for trace gas removal remains a serious challenge. Here, the authors show promise in layered 2D metal−organic frameworks, often overlooked in favor of 3D frameworks, for separating trace acetylene from ethylene with enhanced performance and high stability.

Fine-Tuning Pore Dimension in Hybrid Ultramicroporous Materials Boosting Simultaneous Trapping of Trace Alkynes from Alkenes

Removing trace amounts of alkynes from alkenes is one of the most critical and challenging steps to produce high-purity alkenes, the fundamental raw materials in petrochemical industry. Selective hydrogenation using noble metal catalysts under harsh conditions can convert trace alkynes to alkenes, but suffers from limited selectivity, over-hydrogenation, and energy-intensive consumption. Herein, the simultaneously adsorptive removal of trace propyne (C₃ H₄ ) and acetylene (C₂ H₂ ) from quaternary C₂ H₂ /C₂ H₄ /C₃ H₄ /C₃ H₆ mixture is reported for the first time using an anion-pillared hybrid ultramicroporous material ZU-16-Co (or TIFSIX-3-Co) by finely tuning the pore dimensions and introducing different binding sites to match the shape of alkynes. ZU-16-Co with contracted aperture size and judiciously extended cell dimension simultaneously exhibits superior trapping capacity for propyne under low concentration (2.45 mmol g^-1 at 5000 ppm) and surprisingly high C₂ H₂ uptake (4.18 and 1.4 mmol g^-1 at 1.0 and 0.01 bar, respectively) through synergistic host-guest and guest-guest interactions. Importantly, the ability of ZU-16-Co to capture trace alkynes (C₂ H₂ and C₃ H₄ ) in one step is confirmed by breakthrough experiments for quaternary C₃ H₄ /C₂ H₂ /C₃ H₆ /C₂ H₄ mixtures, presenting ZU-16-Co as a promising material for alkyne trapping.

Highly Selective Separation of C3H8 and C2H2 from CH4 within Two Water-Stable Zn5 Cluster-Based Metal-Organic Frameworks

Adopting the mixed ligands approach, two water-stable Zn₅ cluster-based MOFs, [Zn₁₀(TZ)₁₂(TADIPA)₂(DMF)₄]·DMF·6H₂O (JLU-MOF66) and [Zn₁₀(TZ)₁₂(TPTA)₂(DMA)₂]·2DMA·4H₂O (JLU-MOF67), have been constructed (H₄TADIPA = 5,5'-(1H-1,2,4-triazole-3,5-diyl)diisophthalic acid, H₄TPTA = [1,1':3',1″-terphenyl]-3,3″,5,5″-tetracarboxylic acid, and HTZ = 1H-[1,2,3]triazole). Both compounds with [Zn₅(TZ)₆] clusters exhibit extraordinary stability (pH = 2-11) and selectivity of C₃H₈/CH₄ (308 for JLU-MOF66, and 287 for JLU-MOF67). Compared to JLU-MOF67, JLU-MOF66 with functional groups exhibits higher CO₂ and C₂H₂ uptake capacity and excellent selective separation for C₂H₂/CH₄ (86, 1:1). Such high separation and chemical stability render them as promising materials for industrial applications.

Microporous Metal-Organic Framework with a Completely Reversed Adsorption Relationship for C2 Hydrocarbons at Room Temperature

As a new type of porous material, metal-organic frameworks (MOFs) have been widely studied in gas adsorption and separation, especially in C₂ hydrocarbons. Considering the stronger interaction between the unsaturated molecules and the metal sites, and the smaller molecular size of unsaturated molecules, the usual relationship of affinities and adsorption capacities among C₂ hydrocarbons in most common MOFs is C₂H₂ > C₂H₄ > C₂H₆. Herein, a unique microporous metal-organic framework, NUM-7a (activated NUM-7), with a completely reversed adsorption relationship for C₂ hydrocarbons (C₂H₆ > C₂H₄ > C₂H₂) has been successfully synthesized, which breaks the traditional concept of the adsorption relationship of MOFs for C₂ hydrocarbons. Based on this unique adsorption relationship, a green and simple one-step separation purification for a large amount of C₂H₄ can be expected to be achieved through the selective adsorption of C₂H₆. In addition, NUM-7a also shows good selectivities in C₂H₂/CO₂ and CO₂/CH₄.

Solvent-dependent supramolecular self-assembly of boron cage pillared metal–organic frameworks for selective gas separation

A family of microporous boron cage pillared supramolecular metal–organic frameworks are synthesized with the self-assembly behavior controlled by solvents. Interpenetrated BSF-4 is potential for highly selective C₂H₂/C₂H₄ and C₂H₂/CO₂ separation.

Energy-efficient separation alternatives: metal–organic frameworks and membranes for hydrocarbon separation

The diversity of metal–organic frameworks enables the design of highly efficient adsorbents and membranes towards hydrocarbon separations for energy consumption mitigation.