Terpyridine isomerism as a tool for tuning red-to-NIR emissive properties in heteronuclear gold(I)-thallium(I) complexes

The polymeric linear chain [AuTl(C6Cl5)2]n reacts with three terpyridine-type ligands substituted with thiophene groups containing N-donor centres in different relative positions (L1, L2 and L3), leading to the Au(I)/Tl(I) complexes [AuTl(C6Cl5)2(L1)]n (1), [{AuTl(C6Cl5)2}2(L2)]n (2) and [AuTl(C6Cl5)2(L3)]n (3). X-Ray diffraction studies reveal that L1 acts as a chelate, while L2 and L3 act as bridging ligands, resulting in different coordination indexes for the thallium(I) centre. These structural differences strongly influence their optical properties, and while compounds 2 and 3 emit near the limit of the visible range, complex 1 emits in the infrared region. DFT calculations have also been carried out in order to determine the origin of the electronic transitions responsible for their optical properties.

Heteronuclear Gold(I)-Copper(I) Complexes with Thia- and Mixed Thia-Aza Macrocyclic Ligands: Synthesis, Structures and Optical Properties

The reactivity of the heterometallic polynuclear complexes [{Au(R)2 }2 Cu2 (MeCN)2 ]n (R=C6 F5 , C6 Cl5 ) with the thioether crowns 1,4,7-trithiacyclononane (L1, [12]aneS3 ), 1,4,8,11-tetrathiacyclododecane (L2, [14]aneS4 ), 1,4,7,10,13,16,19,22-octathiacyclotetracosane (L3, [24]aneS8 ), and the quinoline functionalized pendant arm derivatives of the 12-membered mixed-donor macrocycles 1-aza-,4,7,10-trithiacyclododecane ([12]aneNS3 ) and 1,7-diaza-4,10-dithiacyclododecane ([12]aneN2 S2 ), L4 and L5, respectively, was investigated in THF solution. While with L4 and L5 only ionic compounds of general formulation [Cu(L)][Au(R)2 ] were isolated and structurally characterized (none of them featuring Au⋅⋅⋅Cu interactions), with L1-L3, beside similar ionic compounds, some heteronuclear complexes of general formulation [{Au(R)2 }{Cu(L)}] and featuring Au⋅⋅⋅Cu interactions were also obtained. All of them display rather unusual non-classical C-H⋅⋅⋅Au hydrogen interactions. The complexes display in the solid state different optical properties related to their structures, which have been studied experimentally and theoretically via TD-DFT calculations. In particular, all compounds of the type [{Au(R)2 }{Cu(L)}] featuring Au⋅⋅⋅Cu metallophilic interactions display luminescence in the solid state both at room temperature (RT) and at 77 K. On the contrary, ionic compounds of general formulation [Cu(L)][Au(R)2 ], except [Cu(L4)][Au(C6 F5 )2 ], are not luminescent.

Vapochromic behaviour of a gold(I)-lead(II) complex as a VOC sensor

The reaction among [Au2Ag2(C6F5)4(OEt2)2]n, PbCl2 and terpyridine leads to the polymeric complex [{Au(C6F5)2}2{Pb(terpy)}]n (1). Its crystal structure reveals potential voids close to the lead centres large enough to hold different molecules. The availability of these free sites allows complex 1 to act as a VOC sensor. Thus, when 1 is exposed to different solvent vapours such as acetonitrile, toluene or THF, variations in its solid appearance and its photophysical properties are observed as a consequence of the formation of the new polymorphs [{Au(C6F5)2}2{Pb(terpy)(CH3CN)2}]n (2), [{Au(C6F5)2}2{Pb(terpy)}]n·Tol (3) and [{Au(C6F5)2}2{Pb(terpy)(THF)}]n·THF (4). Each polymorph displays a different emission energy depending on its structure and the presence of metallophilic interactions. In addition, the reversible solvent molecule exchange allows the tuning of the luminescence emissions in the greenish yellow-red range. DFT and TD-DFT calculations were performed to explain the origin of the luminescence of all these complexes.

Switching On/Off of a Solvent Coordination in a Au(I)-Pb(II) Complex: High Pressure and Temperature as External Stimuli

The benzonitrile solvate {[{Au(C6F5)2}2{Pb(terpy)}]·NCPh}n (1) (terpy = 2,2':6',2″-terpyridine) displays reversible reorientation and coordination of the benzonitrile molecule to lead upon external stimuli. High-pressure X-ray diffraction studies between 0 and 2.1 GPa reveal a 100% of conversion without loss of symmetry, which is totally reversible upon decompression. By variable-temperature X-ray diffraction studies between 100 and 285 K, a partial coordination is achieved.

Self-Assembled Encapsulation of CuX2- (X = Br, Cl) in a Gold Phosphine Box-like Cavity with Metallophilic Au-Cu Interactions

Synthetic routes to the crystallization of two new box-like complexes, [Au6(Triphos)4(CuBr2)](OTf)5·(CH2Cl2)3·(CH3OH)3·(H2O)4 (1) and [Au6(Triphos)4 (CuCl2)](PF6)5·(CH2Cl2)4 (2) (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine), have been developed. The two centrosymmetric cationic complexes have been structurally characterized through single-crystal X-ray diffraction and shown to contain a CuX2- (X = Br or Cl) unit suspended between two Au(I) centers without the involvement of bridging ligands. These colorless crystals display green luminescence (λem = 527 nm) for (1) and teal luminescence (λem = 464 nm) for (2). Computational results document the metallophilic interactions that are involved in positioning the Cu(I) center between the two Au(I) ions and in the luminescence.

Computational prediction of Au(I)-Pb(II) bonding in coordination complexes and study of the factors affecting the formation of Au(I)-E(II) (E = Ge, Sn, Pb) covalent bonds

We have studied computationally the Au-M (M = Ge, Sn, Pb) bonding trends in a series of model systems [(PH3)3Au-(MCl3)] (M = Ge (4), Sn (5), Pb (6)). For this, we have fully optimized the model systems at the MP2 level of theory, computing the Au-M bonding energy at the equilibrium distances applying the counterpoise (cp) correction to the basis-set superposition error (BSSE) and performing a natural energy decomposition analysis (NEDA). Furthermore, a topological analysis of the electron density using QTAIM, ELF and DORI tools was performed. In order to provide further insights on the possibility of predicting the existence of Au(i)-Pb(ii) donor bonds, Density Functional Theory calculations using the pbe functional and including dispersion corrections (DFT-D3/pbe) were performed on three model systems, [(PR3)3Au-(PbCl3)] (R = CH3 (7), H (8), CF3 (9)). This study also includes the corresponding NEDA calculations and the topological analysis of the electron density, which provides information about the Au-Pb bond, but also about the supporting weak ligand-ligand interactions. Overall, the study provides information about the factors affecting the formation of stabilizing Au(i)-Pb(ii) covalent bonds.

NHC-Au(i) complexes bearing trispyrazolyl borate (Tp) ligands: efficient platforms for bimetallic species

Treatment of NHC-AuCl (NHC = IPr and IMes) complexes with equimolar amounts of KTpR2 (R = Me, H) salts in tetrahydrofuran produces in high yields the heteroleptic complexes 3-6 with the general formula NHC-Au-TpR2. As the TpR ligand in complexes 3-6 features a k1-N type coordination toward the gold(i) center, the subsequent addition of group 10 and 11 metal precursors (NiII, PtII, CuII) results in the isolation of heterobimetallic Au/M complexes supported by TpR platforms. All new metal complexes have been fully characterized by elemental analysis and NMR spectroscopy, and in the case of 3, 4 and 6 by X-ray crystallography.

Metallophilic Au(i)⋯M(i) interactions (M = Tl, Ag) in heteronuclear complexes with 1,4,7-triazacyclononane: structural features and optical properties

New heterometallic Au(i)–M (M = Ag(i) or Tl(i)) complexes show macrocylic ligand (TACN)-directed emissive properties.