Cross-linking enhances the performance of four-electron carbonylpyridinium based polymers for lithium organic batteries

Design and integration of multiple redox-active organic scaffolds into tailored polymer structures to enhance the specific capacity and cycling life is a long-term research goal. Inspired by nature, we designed and incorporated a 4-electron accepting dicarbonylpyridinium redox motif into linear (DBMP) and cross-linked polymer (TBMP) structures. Benefiting from the suppressed solubility and higher electronic conductivity, the cross-linked TBMP based electrode exhibits improved cycling stability and higher specific capacity than the linear counterpart. After 4000 cycles at 1 A g-1, TBMP can maintain a high capacity of 252 mA h g-1, surpassing the performance of many reported organic cathodes. The structural evolution and reaction kinetics during charge and discharge have been investigated in detail. This study demonstrates that cross-linking is an effective strategy to push the bio-derived carbonylpyridinium materials for high performance LOBs.

Proton-assisted seven-electron acceptor properties of di-iso-propylphenyl-bis-iminoacenaphthene

Herein, we report the record-breaking seven-electron reduction of di-iso-propylphenyl-bis-iminoacenaphthene (dpp-bian) involving protons under chemical and electrochemical reduction conditions. Using the dpp-bian-H2 compound as a starting reagent, its mono- and trisodium salts were obtained. A voltammetric study showed that the trinuclear sodium salt can accept an additional seventh electron upon electrochemical reduction.

Stabilization of a Photoradiated Naphthalene Diimide-Based Organic Radical Anion Inside a Peptide-Based Gel Matrix with an Improvement of Optoelectronic Properties

An amino acid-conjugated naphthalene diimide (NDI)-based highly red fluorescent radical anion has been found in a water medium under the photoradiated condition. This molecule has failed to form the radical anion in the monomeric state; however, the J aggregation in the aqueous medium has ensured the formation of radical anion in the ambient condition after the irradiation of both sunlight and UV light exposure. Electron paramagnetic resonance (EPR) studies clearly suggest the formation of radical anions. Herein, the stability of the radical anion in the aqueous medium is only a few minutes as a small amount of shaking is enough to quench the radical anion in the solution state. Furthermore, the incorporation of this molecule into a peptide-based hydrogel matrix and the consequent photoirradiation have not only helped to develop radical anion in the gel matrix but also increased the enormous stability of the radical anion inside the hydrogel matrix even for 30 days. It is envisaged that the formation of the radical anion within the gel matrix prevents the free movement of the NDI molecules and restricts the diffusion of molecular oxygen in the system, which leads to the stability of the radical anions in the gel. Moreover, the stability of the radical anion within the gel has helped to enhance the conductivity of the hybrid gel to a great extent. Interestingly, the radical anion-containing hybrid hydrogel has shown a potential photoswitching property.

Realizing one-step two-electron transfer of naphthalene diimides via a regional charge buffering strategy for aqueous organic redox flow batteries

Naphthalene diimide derivatives show great potential for application in neutral aqueous organic redox flow batteries (AORFBs) due to their highly conjugated molecular structure and stable two-electron storage capacity. However, the two-electron redox process of naphthalene diimides typically occurs via two separate steps with the transfer of one electron per step ("two-step two-electron" transfer process), which leads to an inevitable loss of voltage and energy. Herein, we report a novel regional charge buffering strategy that utilizes the core-substituted electron-donating group to adjust the redox properties of naphthalene diimides, realizing two electron transfer via a single-step redox process ("one-step two-electron" transfer process). The symmetrical battery testing of NDI-DEtOH revealed exceptional intrinsic stability lasting for 11 days with a daily decay rate of only 0.11%. Meanwhile, AORFBs with NDI-DMe/FcNCl and NDI-DEtOH/FcNCl exhibited a remarkable 40% improvement in peak power density at 50% state of charge (SOC) in comparison to NDI/FcNCl-based AORFBs. In addition, the battery's energy efficiency has increased by 24%, resulting in much more stable output power and significantly improved energy efficiency. These results are of great significance to practical applications of AORFBs.

Accumulation of Four Electrons on a Terphenyl (Bis)disulfide

The activation of N₂ , CO₂ or H₂ O to energy-rich products relies on multi-electron transfer reactions, and consequently it seems desirable to understand the basics of light-driven accumulation of multiple redox equivalents. Most of the previously reported molecular acceptors merely allow the storage of up to two electrons. We report on a terphenyl compound including two disulfide bridges, which undergoes four-electron reduction in two separate electrochemical steps, aided by a combination of potential compression and inversion. Under visible-light irradiation using the organic super-electron donor tetrakis(dimethylamino)ethylene, a cascade of light-induced reaction steps is observed, leading to the cleavage of both disulfide bonds. Whereas one of them undergoes extrusion of sulfur to result in a thiophene, the other disulfide is converted to a dithiolate. These insights seem relevant to enhance the current fundamental understanding of photochemical energy storage.

Synthesis and Properties of Electron-Deficient and Electron-Rich Redox-Active Ionic π-Systems

There is growing interest towards the design and synthesis of organic redox-active systems, which exist in ionic form. Multi- redox systems entail life-sustaining processes like photosynthesis and cellular respiration. The significant challenge for material scientists is to rationally design complex molecular materials that can store and transfer multiple electrons at low operational potentials and are stable under ambient conditions. Also, important are the designed ionic π-systems that combine efficient electron and ion transport. Here, we discuss the synthesis of ionic π-systems which exist in the closed-shell form. Firstly, different classes of ionic arylenediimides and viologens with different π-linkers are discussed from the synthetic, structural and redox perspective. These ionic π-systems are based on the electron deficient π-scaffolds, and are shown to accumulate upto six electrons. We then discuss electron-rich ionic arylenediimides which can exist in anionic form or zwitterionic form. The anionic electron donors have absorption extending to the near Infrared (NIR) region and can be stabilized in aqueous solution. We also discuss the effect of the electron accumulation on the aromaticity and non-aromaticity of the naphthalene and the imide rings of the naphthalenediimides. We finally discuss in brief, the applications related to the organic mixed ionic-electronic conductors.

Approaches to Enhancing Electrical Conductivity of Pristine Metal-Organic Frameworks for Supercapacitor Applications

Metal-organic frameworks (MOFs), known as porous coordination polymers, have attracted intense interest as electrode materials for supercapacitors (SCs) owing to their advantageous features including high surface area, tunable porous structure, structural diversity, etc. However, the insulating nature of most MOFs has impeded their further electrochemical applications. A common solution for this issue is to transform pristine MOFs into more stable and conductive metal compounds/porous carbon materials through pyrolysis, which however losses the inherent merits of MOFs. To find a consummate solution, recently a surge of research devoted to improving the electrical conductivity of pristine MOFs for SCs has been carried out. In this review, the most related research work on pristine MOF-based materials is reviewed and three effective strategies (chemical structure design of conductive MOFs (c-MOFs), composite design, and binder-free structure design) which can significantly increase their conductivity and consequently the electrochemical performance in SCs are proposed. The conductivity enhancement mechanism in each approach is well analyzed. The representative research works on using pristine MOFs for SCs are also critically discussed. It is hoped that the new insights can provide guidance for developing high-performance electrode materials based on pristine MOFs with high conductivity for SCs in the future.

Synthesis of a Highly Electron-Deficient, Water-Stable, Large Ionic Box: Multielectron Accumulation and Proton Conductivity

π-acidic boxes exhibiting electron reservoir and proton conduction are unprecedented because of their instability in water. We present the synthesis of one of the strongest electron-deficient ionic boxes showing e^- uptake as well as proton conductivity. Two large anions fit in the box to form anion-π interactions and form infinite anion-solvent wires. The box with NO₃^-···water wires confers high proton conductivity and presents the first example that manifests redox and ionic functionality in an organic electron-deficient macrocycle.

A Modular Strategy for Expanding Electron-Sink Capacity in Noncanonical Cluster Assemblies

A modular synthetic strategy is described whereby organometallic complexes exhibiting considerable electron-sink capacity may be assembled by using only a few simple molecular components. The Fe₂(PPh₂)₂(CO)₅ fragment was selected as a common electroactive component and was assembled around aromatic cores bearing one, two, or three isocyanide functional groups, with the resultant complexes possessing electron-sink capacities of two, four, and six electrons, respectively. The latter complex is noteworthy in that its electron-sink capacity was found to rival that of large multinuclear clusters (e.g., [Ni₃₂C₆(CO)₃₆]^6– and [Ni₃₈Pt₆(CO)₄₈]^6–), which are often considered as benchmarks of electron-sink behavior. Moreover, the modular assembly bearing three Fe₂(PPh₂)₂(CO)₅ fragments was observed to undergo reduction to a hexaanionic state over a potential window of about −1.4 to −2.1 V (vs Fc/Fc⁺), the relatively compressed range being attributed to potential inversions operative during the addition of the second, fourth, and sixth electrons. Such complexes may be designated noncanonical clusters because they exhibit redox properties similar to those of large multinuclear clusters yet lack the extensive network of metal–metal bonds and the condensed metallic cores that typify the latter.

By use of a modular synthetic strategy and relatively few molecular components, organometallic complexes exhibiting considerable electron-sink capacity have been characterized. Complexes bearing one, two, or three Fe₂(PPh₂)₂(CO)₅ fragments bound to aromatic isocyanide cores were found to possess electron-sink capacities of two, four, and six electrons, respectively, the latter rivaling the electron-sink capacity of large polynuclear cluster benchmarks.

Red fluorescent zwitterionic naphthalenediimides with di/mono-benzimidazolium and a negatively-charged oxygen substituent

The C-H/C-X cross-coupling of a benzimidazolium salt with 2Br-NDI afforded two unprecedented zwitterionic NDIs with di/mono-benzimidazolium and an extra negatively-charged oxygen substituent. They exhibited intensified red fluorescence in polar solvents and negative solvatochromism due to an intramolecular charge transfer process, and could specifically label lysosomes and the endoplasmic reticulum in living A549 cells, respectively. They represent a rare case of NDI-derived ionic fluorophores.

Azine Steric Hindrances Switch Halogen Bonding to N-Arylation upon Interplay with σ-Hole Donating Haloarenenitriles

An interplay between 4-bromo- and 4-iodo-5-nitrophthalonitriles (XNPN, X=Br or I) and any one of the azines (pyridine 1, 4-dimethylaminopyridine 2, isoquinoline 3, 4-cyanopyridine 4, 2-methylpyridine 5, 2-aminopyridine 6, quinoline 7, 1-methylisoquinoline 8, and 2,2'-bipyridine 9) proceeds differently depending on steric and electronic effects of the heterocycles. Sterically unhindered azines 1-3 underwent N-arylation to give the corresponding azinium salts (characterized by ¹ H and ¹³ C{H} NMR and high-resolution ESI-MS). In contrast, azines 4-9 with sterically hindered N atoms or bearing an electron-withdrawing substituent, form stable co-crystals with XNPN, where two interacting molecules are bound by halogen bonding. In all obtained co-crystals, X⋅⋅⋅N structure-directed halogen bonds were recognized and theoretically evaluated including DFT calculations (PBE0-D3/def2-TZVP level of theory), QTAIM analysis, molecular electrostatic potential surfaces, and noncovalent interaction plot index. Estimated energies of halogen bonding vary from -7.6 kcal/mol (for 6 ⋅ INPN) to -11.4 kcal/mol (5 ⋅ INPN).

Long-Range Order in Supramolecular π Assemblies in Discrete Multidecker Naphthalenediimides

We report herein the solution and solid-state studies of conformationally flexible multidecker naphthalenediimides (NDIs) in which the chromophoric NDI units intramolecularly assemble into a series of discrete π-stacks. The X-ray crystallography reveals the existence of exclusively all-syn NDIs orientations in lower congeners while all-anti in a higher congener, suggesting short- to long-range π···π interactions throughout the slipped π_NDI chromophoric array. The UV/vis and fluorescence spectra evaluate the discrete π-stacks by remarkable optical changes upon cooling in solution. Furthermore, we carried out a systematic electrochemical investigation to gain an insight into redox properties of the long-range π-stacked structures. The higher congener (5NDI) shows a ten-electron reversible reduction process in a small working potential window (∼0.8 V). To our knowledge, this is an unusual observation in an organic molecular system to undergo up to ten-electron reduction. These results pave the way to design multidecker π-stacks in which structural control with specific electronic properties would be engineered.

A Theoretical Assessment of Spin and Charge States in Binuclear Cobalt-Ruthenium Complexes: Implications for a Creutz-Taube Model Ion Separated by a C60-Derivative Bridging Ligand

We investigate the spin-state energetics and the role of ionic charges in the electronic configuration of binuclear complexes of the form [(NH₃)₅Co(py)-X-(py)Ru(NH₃)₅]^q+. In these compounds with q = 4-6, py = pyridine, and X = C≡C and C₆₀, the Co-Ru distance varies from ∼1.4 to ∼2.1 nm. We carry out a systematic electronic structure calculation using different exchange-correlation (xc) approaches within spin-density functional theory, which are largely employed to investigate the properties of a variety of coordination complexes. To evaluate the effects of spin states and type of spacer in the bridging ligand on the valence tautomerism between Co^2+/3+ and Ru^2+/3+, we examine in more detail the case of Creutz-Taube-type ions [(NH₃)₅Co(py)-X-(py)Ru(NH₃)₅]⁵⁺. Our analysis shows that the stabilization of low- and high-spin states critically depends on the total charge of the complex, type of X-bridged ligand, and employed xc approach to calculate the electron spin density. Importantly, the C₆₀-bridged group may result in a blockage of the valence tautomerism of the Creutz-Taube complex, inducing bistable charge configurations. Overall, our results also show that an adiabatic description in terms of the frontier molecular spin-orbitals for analyzing the distinct spin-charge states of these complexes may dramatically depend on the density-functional description.

Molecular and Supramolecular Multiredox Systems

The design and synthesis of molecular and supramolecular multiredox systems have been summarized. These systems are of great importance as they can be employed in the next generation of materials for energy storage, energy transport, and solar fuel production. Nature provides guiding pathways and insights to judiciously incorporate and tune the various molecular and supramolecular design aspects that result in the formation of complex and efficient systems. In this review, we have classified molecular multiredox systems into organic and organic-inorganic hybrid systems. The organic multiredox systems are further classified into multielectron acceptors, multielectron donors and ambipolar molecules. Synthetic chemists have integrated different electron donating and electron withdrawing groups to realize these complex molecular systems. Further, we have reviewed supramolecular multiredox systems, redox-active host-guest recognition, including mechanically interlocked systems. Finally, the review provides a discussion on the diverse applications, e. g. in artificial photosynthesis, water splitting, dynamic random access memory, etc. that can be realized from these artificial molecular or supramolecular multiredox systems.

Buchwald-Hartwig Coupling at the Naphthalenediimide Core: Access to Dendritic, Panchromatic NIR Absorbers with Exceptionally Low Band Gap

The first successful Buchwald-Hartwig reaction at the naphthalenediimide core is reported, leading to the coupling of diverse secondary aromatic amines including dendritic donors. The G1-dendrimer-based donor exhibit blackish color, providing access to black absorbing systems. λ_onset values up to 1070 nm was achieved, which is the maximum from a single NDI scaffold. These dyes also manifest multielectron reservoir properties. A total of eight-redox states with a band gap of ∼0.95 eV was accomplished.

Electron-poor arylenediimides

This review article highlights the emergence of eclectic molecular design principles to realize remarkably strong electron deficient arylenediimide molecules, aspects of their stability and associated applications.

Anion–π interactions of highly π-acidic dipyridinium-naphthalene diimide salts

A highly π-acidic dipyridinium-naphthalene diimide acceptor shows anion–π interactions with halides and PF₆⁻.