Electrospinning One-dimensional Surface-phosphorized CuCo/C nanofibers for Enzyme-free Glucose Sensing

Developing novel electrocatalysts is of great importance for the practical application of non-enzymatic glucose sensors. One-dimensional (1D) carbon fiber-supported copper-cobalt bimetallic electrocatalysts (CuCo-P350) are successfully prepared via electrospinning technology and...

Surface modification of CuS counter electrodes by hydrohalic acid treatment for improving interfacial charge transfer in quantum-dot-sensitized solar cells

High charge transfer resistance and low electrocatalytic activity of counter electrodes (CEs) are mainly responsible for the poor photovoltaic performance of quantum-dot-sensitized solar cells (QDSSCs). Herein, a novel strategy has been successfully introduced for the first time to improve the electrocatalytic activity and charge transfer properties of a copper sulfide (CuS) CE by modifying it with the addition of hydrohalic acids (HHA). Through the suitable surface modification of HHA-incorporated CuS CE, the charge transfer from the external circuit to the CE surface was effectively facilitated. The electrochemical analyses suggest that charge transfer resistance is sufficiently reduced at the CE/electrolyte interface by using the HHA-treated CuS CEs. This improvement is mainly attributed to the high electrocatalytic activity of the modified CEs for the reduction of the polysulfide redox couple electrolyte in QDSSCs. The device constructed with TiO₂/CdS/CdSe/ZnS photoanodes and the hydrogen-fluoride-treated CuS (HFCuS) CE exhibits a power conversion efficiency of 4.25%, which is considerably higher than that of the device with the bare CuS CE (3.11%). These findings can facilitate the fabrication of highly efficient CEs for next-generation solar cells.

The rational design of Cu2-xSe@(Co,Cu)Se2 core-shell structures as bifunctional electrocatalysts for neutral-pH overall water splitting

Highly active and stable bifunctional electrocatalysts for H2 generation from neutral-pH water are desired, but difficult to achieve. The modification of the electronic and crystal structure of a material by element doping, morphology design and constructing a complex is a valid strategy for obtaining high-performance catalysts toward overall water splitting. In this study, a novel Cu2-xSe@(Co,Cu)Se2 core-shell structure with ultrathin (Co,Cu)Se2 nanosheets anchored as a shell on an internal Cu2-xSe core was fabricated, for the first time, by integrating the three above-mentioned modification methods. Benefiting from the synergistic effect between components and the unique structure, the Cu2-xSe@(Co,Cu)Se2 core-shell structure can serve as an efficient bifunctional electrocatalyst for both HERs and OERs in neutral-pH electrolytes with a current density of 10 mA cm-2 at the overpotentials of 106 mV and 396 mV, respectively. Additionally, the material just requires a cell voltage of 1.73 V to afford a current density of 10 mA cm-2 in a neutral two-electrode electrolyzer. Such performances significantly outperform control catalysts and analogues. Even more importantly, the original concept of coordinated regulation presented in this work can broaden our horizons in the design of new and highly efficient catalysts for neutral water splitting.

In situ addition of Ni salt onto a skeletal Cu7S4 integrated CdS nanorod photocatalyst for efficient production of H2 under solar light irradiation

Development of earth-abundant, low cost, skeletal-type copper sulfide superstructures and in situ addition of Ni salts plays a prominent role to enhance the activity of CdS semiconductor nanostructures for photocatalytic H₂ production.

Bi-component synergic effect in lily-like CdS/Cu7S4 QDs for dye degradation

CdS has attracted extensive attention in the photocatalytic degradation of wastewater due to its relatively narrow bandgap and various microstructures. Previous reports have focused on CdS coupled with other semiconductors to reduce the photocorrosion and improve the photocatalytic performance. Herein, a 3D hierarchical CdS/Cu₇S₄ nanostructure was synthesized by cation exchange using lily-like CdS as template. The heterojunction material completely inherits the special skeleton of the template material and optimizes the nano-scale morphology, and achieves the transformation from nanometer structure to quantum dots (QDs). The introduction of Cu ions not only tuned the band gap of the composites to promote the utilization of solar photons, more importantly, Fenton-like catalysis was combined into the degradation process. Compared with the experiments of organic dye degradation under different illumination conditions, the degradability of the CdS/Cu₇S₄ QDs is greatly superior to pure CdS. Therefore, the constructed CdS/Cu₇S₄ QDs further realized the optimization of degradation performance by the synergic effect of photo-catalysis and Fenton-like catalysis.

CdS has attracted extensive attention in the photocatalytic degradation of wastewater due to its relatively narrow bandgap and various microstructures.

Facile fabrication of alveolate Cu2−xSe microsheets as a new visible-light photocatalyst for discoloration of Rhodamine B

A new photocatalyst, alveolate Cu_2−xSe microsheets, is developed, which reveals superior photocatalytic discoloration of Rhodamine B.

GO–Cu7S4 catalyzed ortho-aminomethylation of phenol derivatives with N,N-dimethylbenzylamines: site-selective oxidative CDC

An efficient ortho-selective C–H aminomethylation of phenols and naphthols with N,N-dimethylbenzylamines using a GO–Cu₇S₄ nanocatalyst is reported.

Selenization of Cu2ZnSnS4 Enhanced the Performance of Dye-Sensitized Solar Cells: Improved Zinc-Site Catalytic Activity for I3. ACS APPLIED MATERIALS & INTERFACES 2017;9:37662-37670. [PMID: 29019395 DOI: 10.1021/acsami.7b09642]

Cu₂ZnSnS₄ (CZTS) and Cu₂ZnSn(S,Se)₄ (CZTSSe) as promising photovoltaic materials have drawn much attention because they are environmentally benign and earth-abundant elements. In this work, the monodispersed, low-cost Cu₂ZnSnS₄ nanocrystals with small size have been controllably synthesized via a wet chemical routine. And CZTSSe could be easily prepared after selenization of CZTS. When they are employed as counter electrodes (CEs) for dye-sensitized solar cells (DSSCs), the power conversion efficiency (PCE) has been improved from 3.54% to 7.13% as CZTS is converted to CZTSSe, which is also compared to that of Pt (7.62%). The exact reason for the enhanced catalytic activity of I₃^- is discussed with the work function and density functional theory (DFT) when CZTSSe converted from CZTS. The results of a Kelvin probe suggest that the work function of CZTSSe (5.61 eV) is closer to that of Pt (5.65 eV) and higher than that of CZTS, which matched the redox shuttle potential better. According to the theory calculation, all the atomic and bond populations changed significantly when Se replaced partly the S on the CZTS system, especially in the Zn site. During the catalytic process as CEs, the adsorption energy obviously increased compared to those at other sites when I₃^- adsorbed on the Zn site in CZTSSe. So, Zn plays an important role for the reduction of I₃^- after CZTS is converted to CZTSSe. Based on above analysis, the reason for enhanced performance of DSSCs when CZTS converted to CZTSSe is mainly due to the enhancement of Zn-site activity. This work is beneficial for understanding the catalytic reaction mechanism of CZTS(Se) as CEs of DSSCs.