Construction of Nanoflower Cobalt-Based Catalyst for Methane-Free CO Hydrogenation to Hydrocarbon Reaction

Methane and its oxidation product (i. e., CO2) are both greenhouse gases. In the product chain of CO hydrogenation to hydrocarbon reaction, methane is also an unwanted product due to its poor added value. Herein we investigated the effect of structure-directing agent urotropine on cobalt-based catalyst supported on Al-O-Zn type carrier and achieved an initial and pioneering exploration of methane-free CO hydrogenation to hydrocarbon reaction at mild CO conversion range. The catalyst modified by urotropine has a nanoflower micromorphology and can significantly change the reaction performance, almost completely eliminating the ability of the catalyst to inhibit C-C coupling within a mild CO conversion range, that is, it can produce no or less C1-C4 gaseous hydrocarbons, while rich in condensed hydrocarbons (i. e., C5+ hydrocarbon selectivity can reach as high as 92.8 %-100.0 %).

Biosynthesis of ternary NiCoFe2O4 nanoflowers: investigating their 3D structure and potential use in gene delivery

Multicomponent nanoparticle systems are known for their varied properties and functions, and have shown potential as gene nanocarriers. This study aims to synthesize and characterize ternary nickel-cobalt-ferrite (NiCoFe2O4) nanoparticles with the potential to serve as gene nanocarriers for cancer/gene therapy. The biogenic nanocarriers were prepared using a simple and eco-friendly method following green chemistry principles. The physicochemical properties of the nanoparticles were analyzed by X-ray diffraction, vibrating sample magnetometer, X-ray photoelectron spectroscopy, and Brunauer-Emmett-Teller. To evaluate the morphology of the nanoparticles, the field emission scanning electron microscopy with energy dispersive X-Ray spectroscopy, high-resolution transmission electron microscopy imaging, and electron tomography were conducted. Results indicate the nanoparticles have a nanoflower morphology with a mesoporous nature and a cubic spinel structure, where the rod and spherical nanoparticles became rose-like with a specific orientation. These nanoparticles were found to have minimal toxicity in human embryonic kidney 293 (HEK-293 T) cells at concentrations of 1 to 250 µg·mL-1. We also demonstrated that the nanoparticles could be used as gene nanocarriers for delivering genes to HEK-293 T cells using an external magnetic field, with optimal transfection efficiency achieved at an N/P ratio of 2.5. The study suggests that biogenic multicomponent nanocarriers show potential for safe and efficient gene delivery in cancer/gene therapy.

Recent advances in nanoflowers: compositional and structural diversification for potential applications

In recent years, nanoscience and nanotechnology have emerged as promising fields in materials science. Spectroscopic techniques like scanning tunneling microscopy and atomic force microscopy have revolutionized the characterization, manipulation, and size control of nanomaterials, enabling the creation of diverse materials such as fullerenes, graphene, nanotubes, nanofibers, nanorods, nanowires, nanoparticles, nanocones, and nanosheets. Among these nanomaterials, there has been considerable interest in flower-shaped hierarchical 3D nanostructures, known as nanoflowers. These structures offer advantages like a higher surface-to-volume ratio compared to spherical nanoparticles, cost-effectiveness, and environmentally friendly preparation methods. Researchers have explored various applications of 3D nanostructures with unique morphologies derived from different nanoflowers. The nanoflowers are classified as organic, inorganic and hybrid, and the hybrids are a combination thereof, and most research studies of the nanoflowers have been focused on biomedical applications. Intriguingly, among them, inorganic nanoflowers have been studied extensively in various areas, such as electro, photo, and chemical catalysis, sensors, supercapacitors, and batteries, owing to their high catalytic efficiency and optical characteristics, which arise from their composition, crystal structure, and local surface plasmon resonance (LSPR). Despite the significant interest in inorganic nanoflowers, comprehensive reviews on this topic have been scarce until now. This is the first review focusing on inorganic nanoflowers for applications in electro, photo, and chemical catalysts, sensors, supercapacitors, and batteries. Since the early 2000s, more than 350 papers have been published on this topic with many ongoing research projects. This review categorizes the reported inorganic nanoflowers into four groups based on their composition and structure: metal, metal oxide, alloy, and other nanoflowers, including silica, metal-metal oxide, core-shell, doped, coated, nitride, sulfide, phosphide, selenide, and telluride nanoflowers. The review thoroughly discusses the preparation methods, conditions for morphology and size control, mechanisms, characteristics, and potential applications of these nanoflowers, aiming to facilitate future research and promote highly effective and synergistic applications in various fields.

Morphology-Controlled Growth of Crystalline Ag-Pt-Alloyed Shells onto Au Nanotriangles and Their Plasmonic Properties

The surface plasmon resonance of noble-metal nanoparticles depends on nanoscale size, morphology, and composition, and provides great opportunities for applications in biomedicine, optoelectronics, (photo)catalysis, photovoltaics, and sensing. Here, we present the results of synthesizing ternary metallic or trimetallic nanoparticles, Au nanotriangles (Au NTs) with crystalline Ag-Pt alloyed shells, the morphology of which can be adjusted from a yolk-shell to a core-shell structure by changing the concentration of AgNO3 or the concentration of Au NT seeds, while the shell thickness can be precisely controlled by adjusting the concentration of K2PtCl4. By monitoring the growth process with UV-vis spectra and scanning transmission electron microscopy (STEM), the shells on the Au NT-Ag-Pt yolk-shell nanoparticles were found to grow via a galvanic replacement synergistic route. The plasmonic properties of the as-synthesized nanoparticles were investigated by optical absorbance measurements.

One-Pot Synthesis of Ternary Alloy Hollow Nanostructures with Controlled Morphologies for Electrocatalysis

The rational design and synthesis of multimetallic hollow nanostructures (HNSs) have been attracting great attention due to their structural and compositional advantages for application in electrocatalysis. Herein, the one-pot synthesis of Pd-Pt-Ag ternary alloy HNSs with controllable morphologies through a self-templating approach without any pre-synthesized templates is reported. Simultaneous reduction of multiple metal precursors by ascorbic acid in the presence of cetyltrimethylammonium chloride (CTAC) yielded initially metastable Pd-Ag nanocrystals, which can act as a self-template, and subsequent galvanic replacement and reduction led to the formation of final Pd-Pt-Ag HNSs. The size and hollowness (the ratio of inner cavity diameter to outer diameter) of the HNSs could be tuned through control over the concentration of CTAC. This can be attributed to the manipulated reduction kinetics of multiple metal precursors with the change in the CTAC concentration. The prepared Pd-Pt-Ag HNSs exhibited improved catalytic performance for ethanol electro-oxidation due to their large active surface areas and ternary alloy composition.

The in situ derivation of a NiFe-LDH ultra-thin layer on Ni-BDC nanosheets as a boosted electrocatalyst for the oxygen evolution reaction

A Ni-based metal organic framework (Ni-BDC) and subsequently derived NiFe-LDH were studied to overcome the defect of the low availability of active sites for the oxygen evolution reaction (OER) during the water splitting process.

Manipulation of Electron Transfer between Pd and TiO2 for Improved Electrocatalytic Hydrogen Evolution Reaction Performance

The urgent need of catalysts with improved performances toward the hydrogen evolution reaction (HER) is still one of the crucial issues for the water splitting electrocatalysis. Herein, we exhibit that the HER activity of the Pd nanocubes could be improved by selecting the appropriately shaped titania nanocrystals as support. In particular, we used Pd nanoparticles with (100)-facet exposed to show that the HER performance of Pd cubes can be improved in both acidic and alkaline electrolyte media when combined on the anatase TiO₂ nanocrystals. Furthermore, we have also investigated the facet effect of TiO₂ on the performance in detail, which indicated stronger catalytic activity when (001)-TiO₂ was used rather than (mix 101/001)-TiO₂ and (101)-TiO₂. The electron-transfer-induced improvement of HER activity of Pd/TiO₂ was assessed by electron energy loss spectroscopy (EELS). Thereafter, the combined support materials with suitable facet exposed can give an additional adjusting path to regulate the HER activities of Pd nanocatalysts, which henceforth can further contribute to a novel way for tuning other catalysts with good electrocatalytic properties.

Structural Characterization, DFT Calculation, NCI, Scan-Rate Analysis and Antifungal Activity against Botrytis cinerea of (E)-2-{[(2-Aminopyridin-2-yl)imino]-methyl}-4,6-di-tert-butylphenol (Pyridine Schiff Base)

Botrytis cinerea is a ubiquitous necrotrophic filamentous fungal phytopathogen that lacks host specificity and can affect more than 1000 different plant species. In this work, we explored L1 [(E)-2-{[(2-aminopyridin-2-yl)imino]-methyl}-4,6-di-tert-butylphenol], a pyridine Schiff base harboring an intramolecular bond (IHB), regarding their antifungal activity against Botrytis cinerea. Moreover, we present a full characterization of the L1 by NMR and powder diffraction, as well as UV–vis, in the presence of previously untested different organic solvents. Complementary time-dependent density functional theory (TD-DFT) calculations were performed, and the noncovalent interaction (NCI) index was determined. Moreover, we obtained a scan-rate study on cyclic voltammetry of L1. Finally, we tested the antifungal activity of L1 against two strains of Botrytis cinerea (B05.10, a standard laboratory strain; and A1, a wild type strains isolated from Chilean blueberries). We found that L1 acts as an efficient antifungal agent against Botrytis cinerea at 26 °C, even better than the commercial antifungal agent fenhexamid. Although the antifungal activity was also observed at 4 °C, the effect was less pronounced. These results show the high versatility of this kind of pyridine Schiff bases in biological applications.

Facile dual tuning of PtPdP nanoparticles by metal-nonmetal co-incorporation and dendritic engineering for enhanced formic acid oxidation electrocatalysis

Tuning the compositions and morphologies of catalysts is very important for the design of efficient formic acid oxidation reaction (FAOR) electrocatalysts. Herein, unique PtPdP dendritic nanoparticles (PtPdP DNs) with uniform size and open-pore structure are fabricated by a facile method, in which the Pd and P elements are simultaneously incorporated into Pt DNs. The prepared PtPdP DNs show enhanced catalytic activity and stability for FAOR. The improved electrocatalytic activity toward FAOR for the PtPdP DNs is mainly attributed to the synergic enhancement effect of the structural and compositional advantages, which jointly promote the electrocatalytic kinetics and thus enhance the electrocatalytic performance.

Tri-metallic PtPdAu mesoporous nanoelectrocatalysts

The design of mesoporous materials with multi-metallic compositions is highly important for various electrocatalytic applications. In this paper, we demonstrate an efficient method to directly fabricate tri-metallic PtPdAu mesoporous nanoparticles (PtPdAu MNs) in a high yield, which is simply performed by heating treatment of the reaction mixture aqueous solution at 40 °C for 4 h. Profiting from its mesoporous structure and multi-metallic components, the as-prepared PtPdAu MNs exhibit enhanced electrocatalytic activities toward both methanol oxidation reaction and oxygen reduction reaction in comparison with bi-metallic PtPd MNs and commercial Pt/C catalyst.

Nanotube-shaped PtFe intermetallics: controlled synthesis, crystal structure, and improved electrocatalytic activities

Nanotube-shaped PtFe intermetallics synthesized over charged β-FeOOH by self-assembly and careful heat treatment exhibit higher Pt activities toward methanol electro-oxidation.

HMTA-assisted formation of hierarchical Co-based materials built by low-dimensional substructures as water oxidation electrocatalysts

We report a 3D Co-based micro-flower constructed from 2D nanosheets, which exhibits excellent OER performance.