Unraveling the Nanosheet Zeolite-Catalyzed Combustion of Aluminum Nanoparticles-Doped exo-Tetrahydrodicyclopentadiene (JP-10) Energetic Fuel

Nanosheet MFI zeolites (Zeolite Socony Mobil, five) have grown in popularity in cracking catalysis considering their tunability in porous topologies, acidic sites, and sheet thickness, thus allowing them to selectively adsorb molecules of specific sizes, shapes, and polarities, resulting in improved cracking performance for a specific fuel. Five different MFI zeolites in the form of a mesoporous nanosheet structure with a controlled concentration of acidic sites denoted as NSMFI(y), where y is Si/Al ratio, have been synthesized. The effects of the relative acidity content of these NSMFI(y) samples on the zeolite-catalyzed combustion of aluminum nanoparticles (AlNPs)-aided exo-tetrahydrodicyclopentadiene (JP-10) mixed energetic fuel droplets levitated in an oxygen-argon atmosphere were investigated using time-resolved imaging (optical and thermal infrared) and spectroscopic techniques (UV-vis and FTIR). The addition of 1.0 wt % of NSMFI(y) zeolites to AlNPs-JP-10 fluid fuel results in critically reduced ignition delays (9 ± 2 ms), elevated ignition temperatures (2800 ± 170 K), and prolonged burning times (60 ± 10 ms) with an enhanced combustion efficiency. The NSMFI(y) zeolites, which possess high acidity and significant mesoporosity, play a crucial role in improving the combustion efficiency by effectively catalyzing the chemical activation of JP-10 and prolonging the burning of the igniting droplet. The NSMFI (60) variant with the highest acidic site content achieved a maximum combustion efficiency of 80 ± 6%. A comprehensive catalytic combustion mechanism has been elucidated based on the detected reactive intermediates such as hydroxyl radical (OH) and aluminum monoxide (AlO). These findings will help to critically advance the development of next-generation, sustainable, and innovative mixed nanofluid fuels.

Efficient Oxidative Decomposition of Jet-Fuel exo-Tetrahydrodicyclopentadiene (JP-10) by Aluminum Nanoparticles in a Catalytic Microreactor: An Online Vacuum Ultraviolet Photoionization Study

The oxidation of gas-phase exo-tetrahydrodicyclopentadiene (JP-10, C10H16) over aluminum nanoparticles (AlNP) has been explored between a temperature range of 300 and 1250 K with a novel chemical microreactor. The results are compared with those obtained from chemical microreactor studies of helium-seeded JP-10 and of helium-oxygen-seeded JP-10 without AlNP to gauge the effects of molecular oxygen and AlNP, respectively. Vacuum ultraviolet (VUV) photoionization mass spectrometry reveals that oxidative decomposition of JP-10 in the presence of AlNP is lowered by 350 and 200 K with and without AlNP, respectively, in comparison with pyrolysis of the fuel. Overall, 63 nascent gas-phase products are identified through photoionization efficiency (PIE) curves; these can be categorized as oxygenated molecules and their radicals as well as closed-shell hydrocarbons along with hydrocarbon radicals. Quantitative branching ratios of the products reveal diminishing yields of oxidized species and enhanced branching ratios of hydrocarbon species with the increase in temperature. While in the low-temperature regime (300-1000 K), AlNP solely acts as an efficient heat transfer medium, in the higher-temperature regime (1000-1250 K), chemical reactivity is triggered, facilitating the primary decomposition of the parent JP-10 molecule. This enhanced reactivity of AlNP could plausibly be linked to the exposed reactive surface of the aluminum (Al) core generated upon the rupture of the alumina shell material above the melting point of the metal (Al).

Counterintuitive Catalytic Reactivity of the Aluminum Oxide "Passivation" Shell of Aluminum Nanoparticles Facilitating the Thermal Decomposition of exo-Tetrahydrodicyclopentadiene (JP-10)

High energy density aluminum nanoparticles (AlNPs) have been at the center of attention as additives to hydrocarbon jet fuels like exo-tetrahydrodicyclopentadiene (JP-10, C10H16) aiming at the superior performance of volume-limited air-breathing propulsion systems. However, a fundamental understanding of the ignition and combustion chemistry of JP-10 in the presence of AlNPs has been elusive. Exploiting an isomer-selective comprehensive identification of the decomposition products in a newly designed high-temperature chemical microreactor coupled to vacuum ultraviolet photoionization, we reveal an active low-temperature heterogeneous surface chemistry commencing at 650 K involving the alumina (Al2O3) shell. Contrary to textbook knowledge of an "inactive alumina surface", this unconventional reactivity, where oxygen is transferred from alumina to JP-10, leads to generating cyclic, oxygenated organics like phenol (C6H5OH) and 2,4-cyclopentadiene-1-one (C5H4O)─key tracers of an alumina-mediated interfacial chemistry. This counterintuitive reactivity transforms our knowledge of the (catalytic) processes of alumina-coated AlNPs on the molecular level.

Experimental and theoretical study on the photoionization of styrene

This study employed a vacuum ultraviolet synchrotron radiation source and reflectron time-of-flight mass spectrometry (TOF-MS) to investigate the photoionization and dissociation of styrene. By analyzing the photoionization mass spectrum and efficiency curve alongside G3B3 theoretical calculations, we determined the ionization energy of the molecular ion, appearance energy of fragment ions, and relevant dissociation pathways. The major ion peaks observed in the photoionization mass spectra of styrene correspond to C₈ H₈ ⁺ , C₈ H₇ ⁺ and C₆ H₆ ⁺ . The ionization energy of styrene is measured as 8.46 ± 0.03 eV, whereas the appearance energies of C₈ H₇ ⁺ and C₆ H₆ ⁺ are found to be 12.42 ± 0.03 and 12.22 ± 0.03 eV, respectively, in agreement with theoretical values. The main channel for the photodissociation of styrene molecular ions is the formation of benzene ions, whereas the dissociation channel that loses hydrogen atoms is the secondary channel. Based on the experimental results and empirical formulas, the required dissociation energies (E_d ) of C₈ H₇ ⁺ , C₈ H₆ ⁺ and C₆ H₆ ⁺ are calculated to be (3.96 ± 0.06), (4.00 ± 0.06) and (3.76 ± 0.06) eV, respectively. Combined with related thermochemical parameters, the standard enthalpies of formations of C₈ H₈ ⁺ , C₈ H₇ ⁺ , C₈ H₆ ⁺ and C₆ H₆ ⁺ are determined to be 964.2, 1346.3, 1350.2 and 1327.0 kJ/mol, respectively. Based on the theoretical study, the kinetic factors controlling the styrene dissociation reaction process are determined by using the Rice-Ramsperger-Kassel-Marcus (RRKM) theory. This provides a reference for further research on the atmospheric photooxidation reaction mechanism of styrene in atmospheric and interstellar environments.

A unified reaction network on the formation of five-membered ringed polycyclic aromatic hydrocarbons (PAHs) and their role in ring expansion processes through radical-radical reactions

Exploiting a chemical microreactor in combination with an isomer-selective product identification through fragment-free photoionization utilizing tunable vacuum ultraviolet (VUV) light in tandem with the detection of the ionized molecules by a high resolution reflection time-of-flight mass spectrometer (Re-TOF-MS), the present investigation reveals molecular mass growth processes to four distinct polycyclic aromatic hydrocarbons carrying two six- and one five-membered ring (C₁₃H₁₀): 3H-cyclopenta[a]naphthalene, 1H-cyclopenta[b]naphthalene, 1H-cyclopenta[a]naphthalene, and fluorene in the gas phase. Temperatures of 973 and 1023 K simulating conditions in combustion settings along with circumstellar envelopes of carbon-rich stars and planetary nebulae. These reactions highlight the importance of methyl-substituted aromatic reactants (biphenyl, naphthalene) which can be converted to the methylene (-CH₂˙) motive by hydrogen abstraction or photolysis. Upon reaction with acetylene, methylene-substituted aromatics carrying a hydrogen atom at the ortho position of the ring can be then converted to cyclopentadiene-annulated aromatics thus providing a versatile pathway to five-membered ring aromatics at elevated temperatures.

Combined Spectroscopic and Computational Investigation on the Oxidation of exo-Tetrahydrodicyclopentadiene (JP-10; C10H16) Doped with Titanium-Aluminum-Boron Reactive Metal Nanopowder

We report the results on the combustion of single, levitated droplets of exo-tetrahydrodicyclopentadiene (JP-10) doped with titanium-aluminum-boron (Ti-Al-B) reactive metal nanopowders (RMNPs) in an oxygen (60%)-argon (40%) atmosphere by exploiting an ultrasonic levitator with droplets ignited by a carbon dioxide laser. Ultraviolet-visible (UV-vis) emission spectroscopy revealed the presence of gas-phase aluminum (Al) and titanium (Ti) atoms. These atoms can be oxidized in the gas phase by molecular oxygen to form spectroscopically detected aluminum monoxide (AlO) and titanium monoxide (TiO) transients. Analysis of the optical ignition videos supports that the nanoparticles are ignited before JP-10. The detection of boron monoxide (BO) further proposes an active surface chemistry through the oxidation of the RMNPs and the release of at least BO into the gas phase. The oxidation of gas-phase BO by molecular oxygen to boron dioxide (BO₂) plus atomic oxygen might operate in the gas phase, although the involvement of surface oxidation processes of RMNPs to BO₂ cannot be discounted. The UV-vis emission spectra also revealed the key reactive intermediates (OH, CH, C₂, and HCO) of the oxidation of JP-10. Electronic structure calculations reveal that the presence of reactive radicals has a profound impact on the oxidation of JP-10. Although titanium monoxide (TiO) reacts to produce titanium dioxide (TiO₂), it does not engage in an active JP-10 chemistry as all abstraction pathways are endoergic by more than 217 kJ mol^-1. This is similar for atomic aluminum and titanium, whose hydrogen abstraction reactions from JP-10 were revealed to be endoergic by at least 77 kJ mol^-1. Therefore, aluminum and titanium react preferentially with molecular oxygen to produce their monoxides. However, the formation of BO, AlO, and BO₂ supplies a pool of highly reactive radicals, which can abstract hydrogen from JP-10 via transition states ranging from only 1 to 5 kJ mol^-1 above the separated reactants, forming JP-10 radicals along with the hydrogen abstraction products (boron hydride oxide, aluminum monohydroxide, and metaboric acid) in the overall exoergic reactions. These abstraction barriers are well below the barriers of abstractions for ground-state atomic oxygen and molecular oxygen. In this sense, gas-phase BO, AlO, and BO₂ catalyze the oxidation of gas-phase JP-10 via hydrogen abstraction, forming highly reactive JP-10 radicals. Overall, the addition of RMNPs to JP-10 not only provides a higher energy density fuel but is also expected to lead to shorter ignition delays compared to pure JP-10 due to the highly reactive pool of radicals (BO, AlO, and BO₂) formed in the initial stage of the oxidation process.

Catalytic Effects of Zeolite Socony Mobil-5 (ZSM-5) on the Oxidation of Acoustically Levitated exo-Tetrahydrodicyclopentadiene (JP-10) Droplets

Jet propulsion 10 (JP-10) droplets with and without aluminum nanoparticles in conjunction with HZSM-5 zeolite and surfactants were ultrasonically levitated, and their oxidation processes were explored to identify how the oxidation process of JP-10 is catalytically affected by the HZSM-5 zeolites and how the surfactant and Al NPs in the system impacted the key experimental parameters of the ignition such as ignition delay time, burn rate, and the maximum temperatures. Singly levitated droplets were ignited using a carbon dioxide laser under an oxygen-argon atmosphere. Pure JP-10 droplets and JP-10 droplets with silicon dioxide of an identical size distribution as the zeolite HZSM-5 did not ignite in strong contrast to HZSM-5-doped droplets. Acidic sites were found to be critical in the ignition of the JP-10. With the addition of the surfactant, the characteristic features of the JP-10 ignition were improved, so the ignition delay time of the zeolite-JP-10 samples were decreased by 2-3 ms and the burn rates were increased by 1.3 to 1.6 × 10⁵ K s^-1. The addition of Al NPs increased the maximum temperatures during the combustion of the systems by 300-400 K. Intermediates and end products of the JP-10 oxidation over HZSM-5 were characterized by UV-vis emission and Fourier-transform infrared transmission spectroscopies, revealing key reactive intermediates (OH, CH, C₂, O₂, and HCO) along with the H₂O molecules in highly excited rovibrational states. Overall, this work revealed that acetic sites in HZSM-5 are critical in the catalytic ignition of JP-10 droplets with the addition of the surfactant and Al NPs, enhancing the oxidation process of JP-10 over HZSM-5 zeolites.

Effects of Nitrogen Dioxide on the Oxidation of Levitated exo-Tetrahydrodicyclopentadiene (JP-10) Droplets Doped with Aluminum Nanoparticles

Nitrogen dioxide (NO₂) can significantly improve the combustion of hydrocarbon fuels, but the effect of NO₂ on the ignition of fuels with energy densities enhanced by aluminum (Al) nanoparticles has not been studied. We therefore investigated the effects of NO₂ on the ignition of JP-10 droplets containing Al nanoparticles initially acoustically levitated in an oxygen-argon mixture. A carbon dioxide laser ignited the droplet and the resulting combustion processes were traced in real time using Raman, ultraviolet-visible (UV-vis), and Fourier-transform infrared (FTIR) spectroscopies simultaneously with a high-speed optical or thermal imaging camera. Temperature temporal profiles of the ignition processes revealed that a 5% concentration of NO₂ did not cause measurable differences in the ignition delay time or the initial rate of temperature rise, but the maximum flame temperature was reduced from 2930 ± 120 K to 2520 ± 160 K. The relative amplitudes of the UV-vis emission bands were used to deduce how NO₂ affected the composition of the radical pool during the oxidation process; for example, the radicals NO, NH, and CN were detected and the OH (A ²Σ⁺-X ²Π) band at 310 nm was less prominent with NO₂. Localized heating from a tightly focused infrared laser beam provided sufficient energy to activate chemical reactions between the JP-10 and NO₂ without igniting the droplet. Raman spectra of the residue produced give information about the initial oxidation mechanisms and suggest that organic nitro compounds formed. Thus, in contrast to previous studies of hydrocarbon combustion without Al nanoparticles, NO₂ was found not to enhance the ignition of an Al-doped JP-10 droplet ignited by a CO₂ laser.

Oxidation of Levitated exo-Tetrahydrodicyclopentadiene Droplets Doped with Aluminum Nanoparticles

Advancement of the next generation of air-breathing propulsion systems will require developing novel high-energy fuels by adding high energy-density materials such as aluminum to enhance fuel performance. We present original measurements, obtained by exploiting the ultrasonic levitation technique, to elucidate the oxidation of exo-tetrahydrodicyclopentadiene (JP-10; C₁₀H₁₆) droplets doped with 80 nm-diameter aluminum nanoparticles (Al NPs) in an oxygen-argon atmosphere. The oxidation was monitored by Raman, Fourier-transform infrared (FTIR), and ultraviolet-visible (UV-Vis) spectroscopies together with high-speed optical and IR thermal-imaging cameras. The addition of 0.5 wt % of the Al NPs was critical for ignition under our experimental conditions occurring at 540 ± 40 K. Diatomic radicals such as OH, CH, C₂, and AlO were observed during the oxidation of the doped JP-10 droplets, thus providing insight into the reactive intermediates. The influence of the Al NPs on the reaction mechanism is discussed.

Theoretical Study of the Reaction Mechanism and Kinetics of the Phenyl + Allyl and Related Benzyl + Vinyl Associations

Potential energy surfaces for the allyl + phenyl and benzyl + vinyl barrierless radical association reactions have been studied at the CCSD(T)-F12/cc-pVTZ-f12//B3LYP/6-311G** level of theory. Variable reaction coordinate transition state theory (VRC-TST) has been employed to evaluate high-pressure limit rate constants for the barrierless channels. Then, Rice-Ramsperger-Kassel-Marcus master equation (RRKM-ME) calculations have been performed to assess phenomenological rate constants and product branching ratios of various reaction channels at different temperatures and pressures. The initial step of both radical association reactions produces 3-phenylpropene which can further dissociate into a variety of bimolecular products including the indene precursor 1-phenylallyl + H. The results showed that at typical combustion conditions the collisional stabilization of 3-phenylpropene dominates both the phenyl + allyl and benzyl + vinyl reactions at temperatures below 1000 K and remains important at high pressures up to 2500 K. The main bimolecular products of the two reactions at high temperatures are predicted to be benzyl + vinyl and phenyl + allyl, respectively. The well-skipping mechanism to form 1-phenylallyl directly in the allyl + phenyl and benzyl + vinyl reactions appeared to be not significant, however, the reactions can provide some contributions into the formation of the indene precursor via the 3-phenylpropene stabilization/dissociation sequence and most of all, via the formation of 3-phenylpropene itself, which then can undergo H-abstraction by available radicals to produce 1-phenylallyl. The allyl + phenyl reaction can also contribute to the formation of two-ring PAH by producing benzyl radical at high temperatures, either by the well-skipping or stabilization/dissociation mechanisms; in turn, benzyl can readily react with acetylene or propargyl radical to form indene or naphthalene precursors, respectively. Rate expressions for all important reaction channels in a broad range of temperatures and pressures have been generated for kinetic modeling.

Photodissociation dynamics of fulvenallene and the fulvenallenyl radical at 248 and 193 nm

Photofragment translational spectroscopy was used to study the photodissociation of fulvenallene, C₇H₆, and the fulvenallenyl radical, C₇H₅. Fulvenallene only loses H atoms to form fulvenallenyl. Fulvenallenyl exhibits both C₂H₂-loss and C₃H₃-loss pathways.