Membrane interactions and antimicrobial effects of layered double hydroxide nanoparticles

Interaction of 2D nanomaterial with cellular barrier: Membrane attachment and intracellular trafficking

The cell membrane serves as a barrier against the free entry of foreign substances into the cell. Limited by factors such as solubility and targeting, it is difficult for some drugs to pass through the cell membrane barrier and exert the expected therapeutic effect. Two-dimensional nanomaterial (2D NM) has the advantages of high drug loading capacity, flexible modification, and multimodal combination therapy, making them a novel drug delivery vehicle for drug membrane attachment and intracellular transport. By modulating the surface properties of nanocarriers, it is capable of carrying drugs to break through the cell membrane barrier and achieve precise treatment. In this review, we review the classification of various common 2D NMs, the primary parameters affecting their adhesion to cell membranes, and the uptake mechanisms of intracellular transport. Furthermore, we discuss the therapeutic potential of 2D NMs for several major disorders. We anticipate this review will deepen researchers' understanding of the interaction of 2D NM drug carriers with cell membrane barriers, and provide insights for the subsequent development of novel intelligent nanomaterials capable of intracellular transport.

Interactions between Layered Double Hydroxide Nanoparticles and Egg Yolk Lecithin Liposome Membranes

The burgeoning need to study the applications of nanoparticles (NPs) in biomedical and pharmaceutical fields requires an understanding of their interactions with lipid membranes for further in vivo studies. In this paper, negatively charged egg yolk lecithin liposome (EYL) has been prepared and used as model lipid membranes. Positively charged Mg₃Al-layered double hydroxides (LDHs) are viewed as models of clay particles. The ability of the LDH NPs, a two-dimensional nanostructure with an average diameter of 100 nm (LDHs-100) or 500 nm (LDHs-500) to cross the membranes, has been thoroughly investigated via (high-resolution) transmission electron microscopy (TEM), optical microscopy (OM), scanning electron microscopy (SEM), confocal fluorescence microscopy (CLSM), and dynamic light scattering (DLS). The liposomes with an average diameter of 1.5 μm were prepared by the thin-film rehydration method followed by an extrusion technique. A calcein leakage assay and steady-state fluorescence measurement displayed the variation of membrane integrity and polarity of the pyrene-located microenvironment during the interaction between EYL and calcein-interacted LDH NPs (CE-LDHs) or LDH NPs, respectively. These results imply that not only spherical particles but also even more sophisticated nanostructured materials are able to effectively cross the lipid bilayers, thereby engineering new compounds that may be encapsulated for safe and potential use in biomedical applications.

Surface-Functionalized Polystyrene Nanoparticles Alter the Transmembrane Potential via Ion-Selective Pores Maintaining Global Bilayer Integrity

Although nanoplastics have well-known toxic effects toward the environment and living organisms, their molecular toxicity mechanisms, including the nature of nanoparticle-cell membrane interactions, are still under investigation. Here, we employ dynamic light scattering, quartz crystal microbalance with dissipation monitoring, and electrophysiology to investigate the interaction between polystyrene nanoparticles (PS NPs) and phospholipid membranes. Our results show that PS NPs adsorb onto lipid bilayers creating soft inhomogeneous films that include disordered defects. PS NPs form an integral part of the generated channels so that the surface functionalization and charge of the NP determine the pore conductive properties. The large difference in size between the NP diameter and the lipid bilayer thickness (∼60 vs ∼5 nm) suggests a particular and complex lipid-NP assembly that is able to maintain overall membrane integrity. In view of this, we suggest that NP-induced toxicity in cells could operate in more subtle ways than membrane disintegration, such as inducing lipid reorganization and transmembrane ionic fluxes that disrupt the membrane potential.

The Potential of Human Peptide LL-37 as an Antimicrobial and Anti-Biofilm Agent

The rise in antimicrobial resistant bacteria threatens the current methods utilized to treat bacterial infections. The development of novel therapeutic agents is crucial in avoiding a post-antibiotic era and the associated deaths from antibiotic resistant pathogens. The human antimicrobial peptide LL-37 has been considered as a potential alternative to conventional antibiotics as it displays broad spectrum antibacterial and anti-biofilm activities as well as immunomodulatory functions. While LL-37 has shown promising results, it has yet to receive regulatory approval as a peptide antibiotic. Despite the strong antimicrobial properties, LL-37 has several limitations including high cost, lower activity in physiological environments, susceptibility to proteolytic degradation, and high toxicity to human cells. This review will discuss the challenges associated with making LL-37 into a viable antibiotic treatment option, with a focus on antimicrobial resistance and cross-resistance as well as adaptive responses to sub-inhibitory concentrations of the peptide. The possible methods to overcome these challenges, including immobilization techniques, LL-37 delivery systems, the development of LL-37 derivatives, and synergistic combinations will also be considered. Herein, we describe how combination therapy and structural modifications to the sequence, helicity, hydrophobicity, charge, and configuration of LL-37 could optimize the antimicrobial and anti-biofilm activities of LL-37 for future clinical use.

Membrane Interactions of Virus-like Mesoporous Silica Nanoparticles

In the present study, we investigated lipid membrane interactions of silica nanoparticles as carriers for the antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES). In doing so, smooth mesoporous nanoparticles were compared to virus-like mesoporous nanoparticles, characterized by a "spiky" external surface, as well as to nonporous silica nanoparticles. For this, we employed a combination of neutron reflectometry, ellipsometry, dynamic light scattering, and ζ-potential measurements for studies of bacteria-mimicking bilayers formed by palmitoyloleoylphosphatidylcholine/palmitoyloleoylphosphatidylglycerol. The results show that nanoparticle topography strongly influences membrane binding and destabilization. We found that virus-like particles are able to destabilize such lipid membranes, whereas the corresponding smooth silica nanoparticles are not. This effect of particle spikes becomes further accentuated after loading of such particles with LL-37. Thus, peptide-loaded virus-like nanoparticles displayed more pronounced membrane disruption than either peptide-loaded smooth nanoparticles or free LL-37. The structural basis of this was clarified by neutron reflectometry, demonstrating that the virus-like nanoparticles induce trans-membrane defects and promote incorporation of LL-37 throughout both bilayer leaflets. The relevance of such effects of particle spikes for bacterial membrane rupture was further demonstrated by confocal microscopy and live/dead assays on Escherichia coli bacteria. Taken together, these findings demonstrate that topography influences the interaction of nanoparticles with bacteria-mimicking lipid bilayers, both in the absence and presence of antimicrobial peptides, as well as with bacteria. The results also identify virus-like mesoporous nanoparticles as being of interest in the design of nanoparticles as delivery systems for antimicrobial peptides.

Antimicrobial and Amyloidogenic Activity of Peptides. Can Antimicrobial Peptides Be Used against SARS-CoV-2?

At present, much attention is paid to the use of antimicrobial peptides (AMPs) of natural and artificial origin to combat pathogens. AMPs have several points that determine their biological activity. We analyzed the structural properties of AMPs, as well as described their mechanism of action and impact on pathogenic bacteria and viruses. Recently published data on the development of new AMP drugs based on a combination of molecular design and genetic engineering approaches are presented. In this article, we have focused on information on the amyloidogenic properties of AMP. This review examines AMP development strategies from the perspective of the current high prevalence of antibiotic-resistant bacteria, and the potential prospects and challenges of using AMPs against infection caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2).

Oxidation of Polyunsaturated Lipid Membranes by Photocatalytic Titanium Dioxide Nanoparticles: Role of pH and Salinity

In the present study, UV-induced membrane destabilization by TiO₂ (anatase) nanoparticles was investigated by neutron reflectometry (NR), small-angle X-ray scattering (SAXS), quartz crystal microbalance with dissipation (QCM-D), dynamic light scattering (DLS), and ζ-potential measurements for phospholipid bilayers formed by zwitterionic palmitoyloleoylphosphatidylcholine (POPC) containing biologically relevant polyunsaturations. TiO₂ nanoparticles displayed pH-dependent binding to such bilayers. Nanoparticle binding alone, however, has virtually no destabilizing effects on the lipid bilayers. In contrast, UV illumination in the presence of TiO₂ nanoparticles activates membrane destabilization as a result of lipid oxidation caused by the generation of reactive oxygen species (ROS), primarily ^•OH radicals. Despite the short diffusion length characterizing these, the direct bilayer attachment of TiO₂ nanoparticles was demonstrated to not be a sufficient criterion for an efficient UV-induced oxidation of bilayer lipids, the latter also depending on ROS generation in bulk solution. From SAXS and NR, minor structural changes were seen when TiO₂ was added in the absence of UV exposure, or on UV exposure in the absence of TiO₂ nanoparticles. In contrast, UV exposure in the presence of TiO₂ nanoparticles caused large-scale structural transformations, especially at high ionic strength, including gradual bilayer thinning, lateral phase separation, increases in hydration, lipid removal, and potential solubilization into aggregates. Taken together, the results demonstrate that nanoparticle-membrane interactions ROS generation at different solution conditions act in concert to induce lipid membrane destabilization on UV exposure and that both of these need to be considered for understanding the performance of UV-triggered TiO₂ nanoparticles in nanomedicine.

Nanoclay-induced bacterial flocculation for infection confinement

Effects of size and charge of anionic nanoclays on their interactions with bacteria-mimicking lipid membranes, bacterial lipopolysaccharide (LPS), and Gram-negative bacteria were investigated using ellipsometry, dynamic light scattering, ζ-potential measurements, and confocal microscopy combined with Live/Dead staining. Based on particle size and charge density, three different anionic hectorite nanoclays were employed, and investigated in the presence and absence of the net cationic human antimicrobial peptide LL-37 (LLGDFFRKSKEKIGKEFKRIVQRIKDFLRNLVPRTES). In the absence of this peptide, the nanoclays were found not to bind to similarly anionic bacteria-mimicking model phospholipid membranes, nor to destabilize these. Similarly, while all nanoclays induced aggregation of Escherichia coli bacteria, the flocculated bacteria remained alive after aggregation. In contrast, LL-37 alone, i.e. in the absence of nanoclay particles, displays antimicrobial properties through membrane lysis, but does not cause bacterial aggregation in the concentration range investigated. After loading the nanoclays with LL-37, potent bacterial aggregation combined with bacterial membrane lysis was observed for all nanoclay sizes and charge densities. Demonstrating the potential of these combined systems for confinement of infection, LPS-induced NF-κB activation in human monocytes was found to be strongly suppressed after nanoclay-mediated aggregation, with a wide tolerance for nanoparticle size and charge density.

Interaction of Laponite with Membrane Components-Consequences for Bacterial Aggregation and Infection Confinement

The antimicrobial effects of Laponite nanoparticles with or without loading of the antimicrobial peptide LL-37 was investigated along with their membrane interactions. The study combines data from ellipsometry, circular dichroism, fluorescence spectroscopy, particle size/ζ potential measurements, and confocal microscopy. As a result of the net negative charge of Laponite, loading of net positively charged LL-37 increases with increasing pH. The peptide was found to bind primarily to the outer surface of the Laponite nanoparticles in a predominantly helical conformation, leading to charge reversal. Despite their net positive charge, peptide-loaded Laponite nanoparticles did not kill Gram-negative Escherichia coli bacteria or disrupt anionic model liposomes. They did however cause bacteria flocculation, originating from the interaction of Laponite and bacterial lipopolysaccharide (LPS). Free LL-37, in contrast, is potently antimicrobial through membrane disruption but does not induce bacterial aggregation in the concentration range investigated. Through LL-37 loading of Laponite nanoparticles, the combined effects of bacterial flocculation and membrane lysis are observed. However, bacteria aggregation seems to be limited to Gram-negative bacteria as Laponite did not cause flocculation of Gram-positive Bacillus subtilis bacteria nor did it bind to lipoteichoic acid from bacterial envelopes. Taken together, the present investigation reports several novel phenomena by demonstrating that nanoparticle charge does not invariably control membrane destabilization and by identifying the ability of anionic Laponite nanoparticles to effectively flocculate Gram-negative bacteria through LPS binding. As demonstrated in cell experiments, such aggregation results in diminished LPS-induced cell activation, thus outlining a promising approach for confinement of infection and inflammation caused by such pathogens.

Flower-like Surface of Three-Metal-Component Layered Double Hydroxide Composites for Improved Antibacterial Activity of Lysozyme

Microbes play an important function in our lives, while some pathogenic bacteria are responsible for many infectious diseases, food safety, and ecological pollution. Layered double hydroxide (LDH) is a kind of natural two-dimensional material and has been applied in many fields. Lysozyme is a green natural antibacterial agent, while the antimicrobial activity of lysozyme is not as good as antibiotics. We use a different ratio of cations to tune the morphology of LDH covered with lysozyme to enhance the antibacterial ability of lysozyme. We synthesize MgAl-LDH, ZnAl-LDH, and ZnMgAl-LDH covered with lysozyme, characterize the structure and morphology, test the antibacterial in culture media, and evaluate the biotoxicity in vitro and in vivo. The flower-like structure of ZnMgAl-LDH has a rough surface, covered with lysozyme with a perfect ring, and presents good antibaterial properties and promotes wound healing of mice. The bloom flower structure of ZnMgAl-LDH can enhance the loading rate of lysozyme; meanwhile, the rougher surface can adhere more bacteria, so lyso@ZnMgAl-LDH presents better antibacterial activity than the binary LDHs.

Structural and morphological aspects of (fluoro)quinolone delivery by layered double hydroxide nanoparticles

Synthesis conditions affect the composition and morphology of LDH-based delivery systems loaded with nalidixic acid and, consequently, their biopharmaceutical behavior.