Exploring the Impact of In Situ-Formed Solid-Electrolyte Interphase on the Cycling Performance of Aluminum Metal Anodes

Unwanted processes in metal anode batteries, e.g., non-uniform metal electrodeposition, electrolyte decomposition, and/or short-circuiting, are not fully captured by the electrolyte bulk solvation structure but rather defined by the electrode-electrolyte interface and its changes induced by cycling conditions. Specifically, for aluminum-ion batteries (AIBs), the role of the solid-electrolyte interphase (SEI) on the Al0 electrodeposition mechanism and associated changes during resting or cycling remain unclear. Here, we investigated the current-dependent changes at the electrified aluminum anode/ionic liquid electrolyte interface to reveal the conditions of the SEI formation leading to irreversible cycling in the AIBs. We identified that the mechanism of anode failure depends on the nature of the counter electrode, where the areal capacity and cycling current for Al0 electrodeposition dictates the number of successful cycles. Notwithstanding the differences behind unstable aluminum anode cycling in symmetrical cells and AIBs, the uniform removal of electrochemically inactive SEI components, e.g., oxide-rich or solvent-derived organic-rich interphases, leads to more efficient cycling behavior. These understandings raise the importance of using specific conditioning protocols for efficient cycling of the aluminum anode in conjugation with different cathode materials.

Molecular-Resolution Imaging of Ionic Liquid/Alkali Halide Interfaces with Varied Surface Charge Densities via Atomic Force Microscopy

When in contact with charged solid surfaces, ionic liquids (ILs) are known to form solvation structures consisting of alternating cation and anion layers. This phenomenon is considered to originate from the adsorption layer of counterions overcompensating the surface charge, so-called overscreening. However, the response of these layers to surfaces with near-zero or extremely high surface charge density (σ) remains inadequately understood. Here, we probe the solvation structure of ILs on alkali halide surfaces with varied surface orientations: nearly zero-charged RbI(100) and highly charged RbI(111), by employing frequency modulation atomic force microscopy with atomic resolution. Two commonly used ILs are examined in this study: 1-methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide ([C3mpyr][NTf2]) and 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][NTf2]). On RbI(100) surfaces with near zero σ, we observe alternating cation and anion layers, diverging from the previously proposed monolayer model for IL/alkali halide(100) interfaces. These results support the argument that overscreening occurs under low σ, even approaching zero, and reconcile conflicting experimental conclusions about low σ systems. On RbI(111) surfaces with high σ, we identify solvation structures consisting of two consecutive counterion layers. This structure aligns with the theoretically predicted crowding; a phenomenon rarely observed in commonly used ILs due to typically unreachable σ in electrochemical IL/electrode systems. Our findings indicate that alkali halide(111) surfaces are potentially valuable for exploring the crowding phenomenon in ILs, addressing the current scarcity of experimental observations.

Nanostructure and Dynamics of Aprotic Ionic Liquids at Graphite Electrodes as a Function of Potential

Atomic force microscope (AFM) videos reveal the near-surface nanostructure and dynamics of the ionic liquids (ILs) 1-butyl-3-methylimidazolium dicyanamide (BMIM DCA) and 1-hexyl-3-methylimidazolium dicyanamide (HMIM DCA) above highly oriented pyrolytic graphite (HOPG) electrodes as a function of surface potential. Molecular dynamics (MD) simulations reveal the molecular-level composition of the nanostructures. In combination, AFM and MD show that the near-surface aggregates form via solvophobic association of the cation alkyl chains at the electrode interface. The diffusion coefficients of interfacial nanostructures are ≈0.01 nm2 s-1 and vary with the cation alkyl chain length and the surface potential. For each IL, the nanostructure diffusion coefficients are similar at open-circuit potential (OCP) and OCP + 1V, but BMIM DCA moves about twice as fast as HMIM DCA. At negative potentials, the diffusion coefficient decreases for BMIM DCA and increases for HMIM DCA. When the surface potential is switched from negative to positive, a sudden change in the direction of the nanostructure motion is observed for both BMIM DCA and HMIM DCA. No transient dynamics are noted following other potential jumps. This study provides a new fundamental understanding regarding the dynamics of electrochemically stable ILs at electrodes vital for the rational development of IL-based electrochemical devices.

Integrative studies of ionic liquid interface layers: bridging experiments, theoretical models and simulations

Ionic liquids (ILs) are a class of salts existing in the liquid state below 100 °C, possessing low volatility, high thermal stability as well as many highly attractive solvent and electrochemical capabilities, etc., making them highly tunable for a great variety of applications, such as lubricants, electrolytes, and soft functional materials. In many applications, ILs are first either physi- or chemisorbed on a solid surface to successively create more functional materials. The functions of ILs at solid surfaces can differ considerably from those of bulk ILs, mainly due to distinct interfacial layers with tunable structures resulting in new ionic liquid interface layer properties and enhanced performance. Due to an almost infinite number of possible combinations among the cations and anions to form ILs, the diversity of various solid surfaces, as well as different external conditions and stimuli, a detailed molecular-level understanding of their structure-property relationship is of utmost significance for a judicious design of IL-solid interfaces with appropriate properties for task-specific applications. Many experimental techniques, such as atomic force microscopy, surface force apparatus, and so on, have been used for studying the ion structuring of the IL interface layer. Molecular Dynamics simulations have been widely used to investigate the microscopic behavior of the IL interface layer. To interpret and clarify the IL structure and dynamics as well as to predict their properties, it is always beneficial to combine both experiments and simulations as close as possible. In another theoretical model development to bridge the structure and properties of the IL interface layer with performance, thermodynamic prediction & property modeling has been demonstrated as an effective tool to add the properties and function of the studied nanomaterials. Herein, we present recent findings from applying the multiscale triangle "experiment-simulation-thermodynamic modeling" in the studies of ion structuring of ILs in the vicinity of solid surfaces, as well as how it qualitatively and quantitatively correlates to the overall ILs properties, performance, and function. We introduce the most common techniques behind "experiment-simulation-thermodynamic modeling" and how they are applied for studying the IL interface layer structuring, and we highlight the possibilities of the IL interface layer structuring in applications such as lubrication and energy storage.

Theory and Simulations of Ionic Liquids in Nanoconfinement

Room-temperature ionic liquids (RTILs) have exciting properties such as nonvolatility, large electrochemical windows, and remarkable variety, drawing much interest in energy storage, gating, electrocatalysis, tunable lubrication, and other applications. Confined RTILs appear in various situations, for instance, in pores of nanostructured electrodes of supercapacitors and batteries, as such electrodes increase the contact area with RTILs and enhance the total capacitance and stored energy, between crossed cylinders in surface force balance experiments, between a tip and a sample in atomic force microscopy, and between sliding surfaces in tribology experiments, where RTILs act as lubricants. The properties and functioning of RTILs in confinement, especially nanoconfinement, result in fascinating structural and dynamic phenomena, including layering, overscreening and crowding, nanoscale capillary freezing, quantized and electrotunable friction, and superionic state. This review offers a comprehensive analysis of the fundamental physical phenomena controlling the properties of such systems and the current state-of-the-art theoretical and simulation approaches developed for their description. We discuss these approaches sequentially by increasing atomistic complexity, paying particular attention to new physical phenomena emerging in nanoscale confinement. This review covers theoretical models, most of which are based on mapping the problems on pertinent statistical mechanics models with exact analytical solutions, allowing systematic analysis and new physical insights to develop more easily. We also describe a classical density functional theory, which offers a reliable and computationally inexpensive tool to account for some microscopic details and correlations that simplified models often fail to consider. Molecular simulations play a vital role in studying confined ionic liquids, enabling deep microscopic insights otherwise unavailable to researchers. We describe the basics of various simulation approaches and discuss their challenges and applicability to specific problems, focusing on RTIL structure in cylindrical and slit confinement and how it relates to friction and capacitive and dynamic properties of confined ions.

Ho-Ion-Polymer/Graphene Heterojunctions Toward Room-Temperature Ferromagnets

Organic ferromagnetic materials offer great promise for spintronic devices, carbon-based chips, and quantum communications, but remain as a challenging issue due to their low saturation magnetization and/or unsustainable ferromagnetic properties. To date, magnetic ion polymers have displayed paramagnetism without exception at room-temperature. In this study, it is reported for the first time that, owing to the structural restriction and charge exchange of Ho ion by polymer/graphene π-π stacking heterojunctions, holmium ion polymer composites exhibited typical hysteresis lines of ferromagnetic materials at room temperature. The room-temperature ferromagnetic ion polymer composite presented the highest saturation magnetization value of 3.36 emu g^-1 and unprecedented sustainable ferromagnetism, compared to reported room-temperature organic ferromagnetic materials. Accordingly, prepared ferromagnetic composites also achieved impressive wave absorption properties, with a maximum reflection loss of as much as -57.32 dB and a broad absorption bandwidth of 5.05 GHz. These findings may promote the development of room-temperature organic ferromagnetic materials.

Structure of Deep Eutectic Solvents (DESs): What We Know, What We Want to Know, and Why We Need to Know It

Deep eutectic solvents (DESs) are a tunable class of solvents with many advantageous properties including good thermal stability, facile synthesis, low vapor pressure, and low-to-negligible toxicity. DESs are composed of hydrogen bond donors and acceptors that, when combined, significantly decrease the freezing point of the resulting solvent. DESs have distinct interfacial and bulk structural heterogeneity compared to traditional solvents, in part due to various intramolecular and intermolecular interactions. Many of the physiochemical properties observed for DESs are influenced by structure. However, our understanding of the interfacial and bulk structure of DESs is incomplete. To fully exploit these solvents in a range of applications including catalysis, separations, and electrochemistry, a better understanding of DES structure must be obtained. In this Perspective, we provide an overview of the current knowledge of the interfacial and bulk structure of DESs and suggest future research directions to improve our understanding of this important information.

Electrotunable friction with ionic liquid lubricants

Room-temperature ionic liquids and their mixtures with organic solvents as lubricants open a route to control lubricity at the nanoscale via electrical polarization of the sliding surfaces. Electronanotribology is an emerging field that has a potential to realize in situ control of friction-that is, turning the friction on and off on demand. However, fulfilling its promise needs more research. Here we provide an overview of this emerging research area, from its birth to the current state, reviewing the main achievements in non-equilibrium molecular dynamics simulations and experiments using atomic force microscopes and surface force apparatus. We also present a discussion of the challenges that need to be solved for future applications of electrotunable friction.

Hydrogen Bond Donors Influence on the Electrochemical Performance of Composite Graphene Electrodes/Deep Eutectic Solvents Interface

The development of energy storage devices with better performance relies on the use of innovative materials and electrolytes, aiming to reduce the carbon footprint through the screening of low toxicity electrolytes and solvent-free electrode design protocols. The application of nanostructured carbon materials with high specific surface area, to prepare composite electrodes, is being considered as a promising starting point towards improving the power and energy efficiency of energy storage devices. Non-aqueous electrolytes synthesized using greener approaches with lower environmental impact make deep eutectic solvents (DES) promising alternatives for electrochemical energy storage and conversion applications. Accordingly, this work proposes a systematic study on the effect of the composition of DES containing a diol and an amide as HBD (hydrogen bond donor: 1,2-propylene glycol and urea), on the electrochemical performance of graphene and graphite composite electrodes/DES electrolyte interface. Glassy carbon (GC) was selected as the bare electrode material substrate to prepare the composite formulations since it provides an electrochemically reproducible surface. Gravimetric capacitance was measured for commercial graphene and commercial graphite/GC composite electrodes in contact with choline chloride, complexed with 1,2-propylene glycol, and urea as the HBD in 1:2 molar ratio. The electrochemical stability was followed by assessing the charge/discharge curves at 1, 2, and 4 A g−1. For comparison purposes, a parallel study was performed using commercial graphite. A four-fold increase in gravimetric capacitance was obtained when replacing commercial graphite (1.70 F g−1) by commercial graphene (6.19 F g−1) in contact with 1,2-propylene glycol-based DES. When using urea based DES no significant change in gravimetric capacitance was observed when commercial graphite is replaced by commercial graphene.

Density functional theory of alkali metals at the IL/graphene electrochemical interface

The mechanism of charge transfer between metal ions and graphene in the presence of an ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate) is investigated by means of density functional theory calculations. For that purpose, two different comparisons are established: (i) the behavior of Li⁺ and K⁺ when adsorbed onto the basal plane of graphene and (ii) the differences between Li⁺ approaching the carbon surface from the basal plane and being intercalated through the edge plane of trilayer graphene. In the first case, it is found that the metal ions must overcome high energy barriers due to their interaction with the ionic liquid before reaching an equilibrium position close to the interface. In addition, no significant charge transfer between any of the metals and graphene takes place until very close energetically unfavorable distances. The second configuration shows that Li⁺ has no equilibrium position in the proximity of the interface but instead has an equilibrium position when it is inside the electrode for which it has to cross an energy barrier. In this case, the formation of a LiC₁₂ complex is observed since the charge transfer at the equilibrium distance is achieved to a considerable extent. Thus, the interfacial charge transfer resistance on the electrode in energy devices based on ionic liquids clearly depends not only on the binding of the ionic liquid to the metal cations and their ability to form a dense solvation shell around them but also on the surface topography and its effect on the ion packing on the surface.

MAS-NMR of [Pyr13][Tf2N] and [Pyr16][Tf2N] Ionic Liquids Confined to Carbon Black: Insights and Pitfalls

Electrolytes based on ionic liquids (IL) are promising candidates to replace traditional liquid electrolytes in electrochemical systems, particularly in combination with carbon-based porous electrodes. Insight into the dynamics of such systems is imperative for tailoring electrochemical performance. In this work, 1-Methyl-1-propylpyrrolidinium bis(trifluoromethylsulfonyl)imide and 1-Hexyl-1-methylpyrrolidinium bis(trifluoromethylsulfonyl)imide were studied in a carbon black (CB) host using spectrally resolved Carr-Purcell-Meiboom-Gill (CPMG) and 13-interval Pulsed Field Gradient Stimulated Echo (PFGSTE) Magic Angle Spinning Nuclear Magnetic Resonance (MAS-NMR). Data were processed using a sensitivity weighted Laplace inversion algorithm without non-negativity constraint. Previously found relations between the alkyl length and the aggregation behavior of pyrrolidinium-based cations were confirmed and characterized in more detail. For the IL in CB, a different aggregation behavior was found compared to the neat IL, adding the surface of a porous electrode as an additional parameter for the optimization of IL-based electrolytes. Finally, the suitability of MAS was assessed and critically discussed for investigations of this class of samples.

Evaluation of static differential capacitance at the [C4mim+][TFSA-]/electrode interface using molecular dynamics simulation combined with electrochemical surface plasmon resonance measurements

Molecular dynamic (MD) simulations have been performed for 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide ([C₄mim⁺][TFSA^-]), an ionic liquid (IL), on a charged graphene electrode to achieve the quantitative analysis of the static differential capacitance using the electrochemical surface plasmon resonance (ESPR). The MD simulations have provided the surface charge density on the electrode and ionic distributions in the electric double layer, both of which are indispensable for the evaluation of static differential capacitance using ESPR but are difficult to be measured by experimental techniques. This approach has allowed the quantitative analysis and explanation of the SPR angle shift in ESPR. The major contribution to the SPR angle shift is found to be the change in ionic concentrations of the first ionic layer on the electrode, owing to higher polarizabilities of ions in the first ionic layer than those in the overlayers. Moreover, the ionic orientation on the electrode and ionic multilayer structure have also been investigated in detail. The butyl group of C₄mim⁺ in the first ionic layer is found to provide extra room for C₄mim⁺ in the second ionic layer but exclude TFSA^-, which affects the interval and regularity of ionic multilayers.

Interfacial Structures in Ionic Liquid-Based Ternary Electrolytes for Lithium-Metal Batteries: A Molecular Dynamics Study

Lithium-metal batteries are promising candidates to fulfill the future performance requirements for energy storage applications. However, the tendency to form metallic dendrites and the undesirable side reactions between the electrolyte and the Li electrode lead to poor performance and safety issues in these batteries. Therefore, understanding the interfacial properties and the Li-metal surface/electrolyte interactions is crucial to resolve the remaining obstacles and make these devices feasible. Here, we report a computational study on the interface effects in ternary polymer electrolytes composed by poly(ethylene oxide) (PEO), lithium salts, and different ionic liquids (ILs) confined between two Li-metal slabs. Atomistic simulations are used to characterize the local environment of the Li⁺ ions and the transport properties in the bulk and at the interface regions. Aggregation of ions at the metal surface is seen in all investigated systems; the structure and composition are directly correlated to the IL components. The strong interactions between the electrolyte species and the Li-metal atoms result in the structuring of the electrolyte at the interface region, in which comparatively small and flat ions result in a well-defined region with extensive Li⁺ populations and high self-diffusion coefficients. In contrast, large ions such as [P222mom]⁺ increase the PEO density in the bulk due to large steric effects at the interface. Therefore, the choice of specific ILs in ternary polymer electrolytes can tune the structure-dynamic properties at the Li-metal surface/electrolyte interface, controlling the SEI formation at the electrode surface, and thereby improve battery performance.

Elucidating esterification reaction during deposition of cutin monomers from classical molecular dynamics simulations

The structural behavior of some cutin monomers, when deposited on mica support, was extensively investigated by our research group. However, other events, such as esterification reaction (ER), are still a way to explore. In this paper, we explore possible ER that could occur when these monomers adsorb on support. Although classical molecular dynamics simulations are not able to capture reactive effects, here, we show that they become valuable strategies to analyze the initial structural configurations to predict the most favorable reaction routes. Thus, when depositing aleuritic acid (ALE), it is observed that the loss of capacity to form self-assembled (SA) systems favors different routes to occur ER. In pure ALE bilayers systems, an ER is given exclusively through the -COOH and primary -OH groups. In pure ALE monolayers systems, the ER does not happen when the system is self-assembled. However, for disorganized systems, it is able to occur by two possible routes: -COOH and primary -OH (route 1) and -COOH and secondary -OH (route 2). When palmitic acid (PAL) is added in small quantities, ALE SAMs can now form an ER. In this case, ER occurs mostly through the -COOH and secondary -OH groups. However, when the presence of PAL is dominant, ER can occur with either of both possibilities, that is, routes 1 and 2. Graphical abstract.

Electrochemical Behavior of Graphene in a Deep Eutectic Solvent

Graphene electrodes and deep eutectic solvents (DESs) are two emerging material systems that have individually shown highly promising properties in electrochemical applications. To date, however, it has not been tested whether the combination of graphene and DESs can yield synergistic effects in electrochemistry. We therefore study the electrochemical behavior of a defined graphene monolayer of centimeter-scale, which was produced by chemical vapor deposition and transferred onto insulating SiO₂/Si supports, in the common DES choline chloride/ethylene glycol (12CE) under typical electrochemical conditions. We measure the graphene potential window in 12CE and estimate the apparent electron transfer kinetics of an outer-sphere redox couple. We further explore the applicability of the 12CE electrolyte to fabricate nanostructured metal (Zn) and metalloid (Ge) hybrids with graphene by electrodeposition. By comparing our graphene electrodes with common bulk glassy carbon electrodes, a key finding we make is that the two-dimensional nature of the graphene electrodes has a clear impact on DES-based electrochemistry. Thereby, we provide a first framework toward rational optimization of graphene-DES systems for electrochemical applications.

Revealing the interfacial nanostructure of a deep eutectic solvent at a solid electrode

Deep eutectic solvents (DESs) are both green and sustainable, making them an increasingly attractive alternative to conventional solvents. One of their applications is the electrochemical deposition of metals that cannot be deposited from aqueous solution because of the limited electrochemical window of water. The electrodeposition process is influenced by the structure and dynamics of the solvent at the solid-liquid interface. Therefore,the nanoscale structure of the interface between a silicon substrate and deep eutectic solvent (choline chloride-ethylene glycol) was studied by neutron reflectometry (NR) and molecular dynamics (MD) simulations. It is not possible to model NR measurements of this system without simulating a dense DES layer at the solid-liquid interface. This study used an MD simulation trajectory to extract the density, thickness, and roughness of this DES layer. With this input, the model reproduces the reflectometry data at all measured H/D contrasts very well. The thickness of the layer does not change appreciably when applying charge or at higher temperatures. Further analysis revealed a reorganization of ions and reorientation of the choline cations in the interface layer when the electrodes are charged. These changes in ion orientation are not observed with the NR technique since they do not influence the neutron scattering length density profile due to the high number of ethylene glycol molecules at the interface. However, the agreement between measured neutron reflectometry data and model parameters obtained from MD simulations justified subnanoscale analysis of the MD trajectory and confirmed that these two complementary techniques can be successfully combined to reveal the solid/DES interface structure.

Deep Eutectic Solvent Reline at 2D Nanomaterial Interfaces

The behavior of reline (choline chloride mixed with urea at a 1-to-2 mole ratio) deep eutectic solvent at the interfaces of 2D nanomaterials was studied by using molecular simulation methods. Graphene, boron nitride, silicene, germanene, and molybdenum disulfide were studied for considering the most relevant features of available 2D nanomaterials. The reline-nanomaterial interactions were analyzed, and the mechanism of reline adsorption with the properties at the interfaces was studied. Likewise, the behavior of the deep eutectic solvent upon confinement between parallel nanosheets was considered as a model of properties when placed in slit nanopores. The results provide a nanoscopic vision of the adsorption and confinement of reline regarding 2D nanomaterials, thus advancing the development of new materials based on deep eutectics.

Tuning Sodium Interfacial Chemistry with Mixed-Anion Ionic Liquid Electrolytes

The interphase layer that forms on either the anode or the cathode is considered to be one of the critical components of a high performing battery. This solid-electrolyte interphase (SEI) layer determines the stability of the electrode in the presence of a given electrolyte as well as the internal resistance of a battery, and hence the overpotential of a cell. In the case of lithium ion batteries where carbonate based electrolytes are used, additives including hexafluorophosphate (PF₆), bis-trifluoromethylsulfonimide (TFSI), (fluorosulfonyl)(trifluoromethanesulfonyl)imide (FTFSI), and fluorosulfonimde (FSI) are used to obtain favorable SEI layers. Ionic liquids and salts based on anions containing nitrile groups, including dicyanamide (DCA), offer a less expensive alternative to a fluorinated anion and have also been shown to support stable electrochemistry in lithium and sodium systems. However, longer term cycling leads to the eventual passivation of the electrode, presumed to be due to the instability of the DCA anion. We herein consider the use of a fluorinated anion to control the interfacial electrochemistry and provide a more stable SEI in DCA ILs. We investigate the addition of NaDCA, NaFSI, NaTFSI, and NaFTFSI to the methylpropylpyrrolidinium dicyanamide ([C3mpyr]DCA) ionic liquid. NaFSI was found to generate a more stable SEI layer, as evidenced by extended symmetric cell cycling, while the TFSI and FTFSI salts both lead to thicker, highly passivating surfaces. We use molecular dynamics, infrared spectroscopy and X-ray photoelectron spectroscopy to interrogate and discuss the influence of the anion on the bulk electrolyte, the interfacial electrolyte structure, and the formation of the SEI layer, in order to rationalize the contrasting electrochemical observations.

Atomistic Insights into the Layered Microstructure and Time-Dependent Stability of [BMIM][PF6] Confined within the Meso-Slit of Carbon

Clarifying the microstructures and time-dependent stability of ionic liquids (ILs) within the confinement of the meso-slit of carbon is the first step to understand the intrinsic synergy effect between ILs and a promising mesoporous carbon electrode. In this work, we adopted molecular dynamics to systematically investigate the behavior of [BMIM][PF₆] in the 2.8 nm-wide meso-slit of carbon. The confined ILs formed a pronounced layered spatial distribution and can be divided into three distinct regions, namely, com-, sub-, and cen-layer, according to valley coordinates in the number density profiles. In the com-layer region, the imidazolium rings of ILs possess two dominant orientations, namely, "parallel" and "tilted standing". The rotation ability of all the ions is highly restrained. In the sub-layer and cen-layer regions, a part of the [BMIM] imidazolium ring has a preferred "tilted standing" orientation. The [BMIM] cations are still in a rotational restrain state and show a preferred rotation motion along the x-y plane. The hydrogen bond between [BMIM] cations and [PF₆] anions play a crucial role in determining the confined multilayered spatial distribution and distinctive orientation properties of ILs.

Graphene Meets Ionic Liquids: Fermi Level Engineering via Electrostatic Forces

Graphene-based two-dimensional (2D) materials are promising candidates for a number of different energy applications. A particularly interesting one is in next generation supercapacitors, where graphene is being explored as an electrode material in combination with room temperature ionic liquids (ILs) as electrolytes. Because the amount of energy that can be stored in such supercapacitors critically depends on the electrode-electrolyte interface, there is considerable interest in understanding the structure and properties of the graphene/IL interface. Here, we report the changes in the properties of graphene upon adsorption of a homologous series of alkyl imidazolium tetrafluoroborate ILs using a combination of experimental and theoretical tools. Raman spectroscopy reveals that these ILs cause n-type doping of graphene, and the magnitude of doping increases with increasing cation chain length despite the expected decrease in the density of surface-adsorbed ions. Molecular modeling simulations show that doping originates from the changes in the electrostatic potential at the graphene/IL interface. The findings described here represent an important step in developing a comprehensive understanding of the graphene/IL interface.

Theoretical Study on Molten Alkali Carbonate Interfaces

The properties and structure of relevant interfaces involving molten alkali carbonates are studied using molecular dynamics simulation. Lithium carbonate and the Li/Na/K carbonate eutectic mixture are considered. Gas phases composed of pure CO₂ or a model flue gas mixture are analyzed. Similarly, the adsorption of these gas phases on graphene are studied, showing competitive CO₂ and N₂ adsorption that develops liquid-like layers and damped oscillation behavior for density. The interaction of the studied carbonates with graphene is also characterized by development of adsorption layers through strong graphene-carbonate interactions and the development of hexagonal lattice arrangements, especially for lithium carbonate. The development of molten salts-vacuum interfaces is also considered, analyzing the ionic rearrangement in the interfacial region. The behavior of the selected gas phases on top of molten alkyl carbonate is also studied, showing the preferential adsorption of CO₂ molecules when flue gases are considered.

Probing Ionic Liquid Electrolyte Structure via the Glassy State by Dynamic Nuclear Polarization NMR Spectroscopy

Dynamic nuclear polarization (DNP)-enhanced solid-state NMR spectroscopy has been used to study an ionic liquid salt solution (N-methyl-N-propyl-pyrrolidinium bis(fluorosulfonyl)imide, C₃mpyrFSI, containing 1.0 m lithium bis(fluorosulfonyl)imide, ⁶LiFSI) in its glassy state at a temperature of 92 K. The incorporation of a biradical to enable DNP signal enhancement allowed the proximities of the lithium to the individual carbon sites on the pyrrolidinium cation to be probed using a ¹³C-⁶Li REDOR pulse sequence. Distributions in Li-C distances were extracted and converted into a 3D map of the locations of the Li⁺ relative to the C₃mpyr that shows remarkably good agreement with a liquid-phase molecular dynamics simulation.