Triglyceride-Tethered Membrane Lipase Sensor

Sensors that can quickly measure the lipase activity from biological samples are useful in enzyme production and medical diagnostics. However, current lipase sensors have limitations such as requiring fluorescent labels, pH control of buffer vehicles, or lengthy assay preparation. We introduce a sparsely tethered triglyceride substrate anchored off of a gold electrode for the impedance sensing of real-time lipase activity. The tethered substrate is self-assembled using a rapid solvent exchange technique and can form an anchored bilayer 1 nm off the gold electrode. This allows for an aqueous reservoir region, providing access to ions transported through membrane defects caused by triglyceride enzymatic hydrolysis. Electrical impedance spectroscopy techniques can readily detect the decrease in resistance caused by enzymatically induced defects. This rapid and reliable lipase detection method can have potential applications in disease studies, monitoring of lipase production, and as point-of-care diagnostic devices.

Development of a bis-pyrene phospholipid probe for fluorometric detection of phospholipase A2 inhibition

In this work, we report the design, synthesis, and application of a bis-pyrene phospholipid probe for detection of phospholipase A2 action through changes in pyrene monomer and excimer fluorescence intensities. Continuous fluorometric assays enabled detection of the activities of multiple PLA2 enzymes as well as the decrease in catalysis by PLA2 from honey bee venom caused by the inhibitor p-bromo phenacylbromide. Thin-layer chromatography and mass spectrometry analysis were also used to validate probe hydrolysis by PLA2. Mass spectrometry data also supported cleavage of the probe by phospholipase C and D enzymes, although changes in fluorescence were not observed in these cases. Nevertheless, the bis-pyrene phospholipid probe developed in this work is effective for detection of PLA2 enzyme activity through an assay that enables screening for inhibitor development.

Exploring Interfacial Hydrolysis of Artificial Neutral Lipid Monolayer and Bilayer Catalyzed by Phospholipase C

Phospholipase C (PLC) represents an important type of enzymes with the feature of hydrolyzing phospholipids at the position of the glycerophosphate bond, among which PLC extracted from Bacillus cereus (BC-PLC) has been extensively studied owing to its similarity to hitherto poorly characterized mammalian analogues. This study focuses on investigating the interfacial hydrolysis mechanism of phosphatidylcholine (PC) monolayer and bilayer membranes catalyzed by BC-PLC using sum frequency generation vibrational spectroscopy (SFG-VS) and laser scanning confocal microscopy (LSCM). We found that, upon interfacial hydrolysis, BC-PLC was adsorbed onto the lipid interface and catalyzed the lipolysis with no net orientation, as evidenced by the silent amide I band, indicating that ordered PLC alignment was not a prerequisite for the enzyme activity, which is very different from what we have reported for phospholipase A₁ (PLA₁) and phospholipase A₂ (PLA₂) [Kai, S. Phys. Chem. Chem. Phys. 2018, 20(1), 63-67; Wang, F. Langmuir 2019, 35(39), 12831-12838; Zhang, F. Langmuir 2020, 36(11), 2946-2953]. For the PC monolayer, one of the two hydrolysates, phosphocholine, desorbed from the interface into the aqueous phase, while the other one, diacylglycerol (DG), stayed well packed with high order at the interface. For the PC bilayer, phosphocholine dispersed into the aqueous phase too, similar to the monolayer case; however, DG, presumably formed clusters with the unreacted lipid substrates and desorbed from the interface. With respect to both the monolayer and bilayer cases, mechanistic schematics were presented to illustrate the different interfacial hydrolysis processes. Therefore, this model experimental study in vitro provides significant molecular-level insights and contributes necessary knowledge to reveal the lipolysis kinetics with respect to PLC and lipid membranes with monolayer and bilayer structures.

Estimation of the Phospholipase A2 Selectivity on POPC/POPG Membranes Using the Interaction Map

Abstract

The regulation of the activity and selectivity of phospholipase A2 (PLA2), which is capable of cleaving fatty acid in the second position (sn-2) of the phospholipid, is carried out through the membrane-binding and catalytic sites of the enzyme. For hydrolytic activity, PLA2 must first bind to the phospholipid membrane, and the binding efficiency depends on the composition of the membrane. The membrane-binding site of PLA2 is formed by several tens of amino acids and its composition differs from enzyme to enzyme; hydrophobic and positively charged amino acids play a key role in the interaction. In this work, we investigated the interaction of PLA2 from bee venom with phospholipid bilayers of palmitoyl oleoylphosphatidylcholine (POPC) containing different amounts of palmitoyloleoylphosphatidylglycerol (POPG). On the basis of the measurements of the protein intrinsic fluorescence and the anisotropy of the fluorescence of the lipid probe we propose the construction of lipid–protein interaction maps, which reflect both the efficiency of protein binding and changes in the structure of the membrane. These changes cause alterations in the fluorescence anisotropy of the label, which in turn is a measure of the mobility of the lipid environment of the fluorescent probe. Analysis of interaction maps showed that there is a relationship between lipid mobility and enzyme binding efficiency: the optimum interaction of PLA2 with membranes from a POPC/POPG mixture lies in the region of the highest lipid mobility, and not in the region of the highest negative charge. This dependence complements the existing understanding of the process of recognition of the membrane surface by the enzyme and the selection of lipids by the enzyme already bound to the membrane. The proposed mapping method can be extended to other membrane-active proteins.

Cell to Cell Signaling through Light in Artificial Cell Communities: Glowing Predator Lures Prey

Cells commonly communicate with each other through diffusible molecules but nonchemical communication remains elusive. While bioluminescent organisms communicate through light to find prey or attract mates, it is still under debate if signaling through light is possible at the cellular level. Here, we demonstrate that cell to cell signaling through light is possible in artificial cell communities derived from biomimetic vesicles. In our design, artificial sender cells produce an intracellular light signal, which triggers the adhesion to receiver cells. Unlike soluble molecules, the light signal propagates fast, independent of diffusion and without the need for a transporter across membranes. To obtain a predator-prey relationship, the luminescence predator cells is loaded with a secondary diffusible poison, which is transferred to the prey cell upon adhesion and leads to its lysis. This design provides a blueprint for light based intercellular communication, which can be used for programing artificial and natural cell communities.

Phospholipase A2 way to hydrolysis: Dint formation, hydrophobic mismatch, and lipid exclusion

Phospholipase A2 (PLA2) exerts a wide range of biological effects and attracts a lot of attention of researchers. Two sites are involved in manifestation of PLA2 enzymatic activity: catalytic site responsible for substrate binding and fatty acid cleavage from the sn-2 position of a glycerophospholipid, and interface binding site (IBS) responsible for the protein binding to lipid membrane. IBS is formed by positively charged and hydrophobic amino acids on the outer surface of the protein molecule. Understanding the mechanism of PLA2 interaction with the lipid membrane is the most challenging step in biochemistry of this enzyme. We used a combination of experimental and computer simulation techniques to clarify molecular details of bee venom PLA2 interaction with lipid bilayers formed by palmitoyloleoylphosphatidylcholine or dipalmitoylphosphatidylcholine. We found that after initial enzyme contact with the membrane, a network of hydrogen bonds was formed. This led to deformation of the interacting leaflet and dint formation. The bilayer response to the deformation depended on its phase state. In a gel-phase bilayer, diffusion of lipids is restricted therefore chain melting occurred in both leaflets of the bilayer. In the case of a fluid-phase bilayer, lateral diffusion is possible, and lipid polar head groups were excluded from the contact area. As a result, the bilayer became thinner and a large hydrophobic area was formed. We assume that relative ability of a bilayer to come through lipid redistribution process defines the rate of initial stages of the catalysis.

Label-Free, Real-Time Phospholipase-A Isoform Assay

Phospholipase-A (PLA) enzymes catalyze the hydrolysis of ester bonds in select glycerophospholipids. Sensors for rapidly measuring the PLA activity in biological samples have relevance in the study of venom compositions and in medical diagnostics for the diagnosis of diseases such as acute pancreatitis. Current PLA sensor technologies are often restricted by the time it takes to prepare an assay, the necessity of using fluorescent labels, or the fact they might require strict pH control of the buffer vehicles used. Here we present a tethered bilayer lipid membrane (tBLM) impedance sensor array for the rapid and real-time detection of PLA, which includes the ability to selectively detect phospholipase-A₂ (PLA₂) from phospholipase-A₁ (PLA₁) isoforms. Comparing the activity of PLA₁ and PLA₂ in an array of tBLMs composed of ether phospholipids, ester phospholipids or ether-ester phospholipids allows for the rapid and reliable distinction between the isoforms, as measured using swept-frequency electrical impedance spectroscopy. After testing the assay using pure enzymes, we demonstrate the capacity of the sensor to identify specific PLA₂-type, calcium-dependent activity from the venom of the South American bullet ant, Paraponera clavata, at a concentration of 1 μg/mL. The specificity of the phospholipase activity was corroborated using matrix-assisted laser-desorption/ionization time-of-flight mass spectrometry. As further validation, we tested the activities of a PLA₁ isoform in the presence of different buffers commonly used in biology and biochemistry experiments. Sensitivity testing shows that PLA₁ can be detected at an activity as low as 0.06 U/mL. The rapid and reliable detection of phospholipases presented in this study has potential applications in the study of animal venoms as well as in lipase bioreactors and point-of-care devices.

Illustrating Interfacial Interaction between Honey Bee Venom Phospholipase A2 and Supported Negatively Charged Lipids with Sum Frequency Generation and Laser Scanning Confocal Microscopy

Phospholipase A₂ is an important enzyme species which can widely be found in animals, plants, bacteria, and so on. A large number of studies have shown that phospholipase A₂ is highly catalytic toward the lipids. Here, sum frequency generation (SFG) vibrational spectroscopy and laser scanning confocal microscopy (LSCM) were applied to study the interaction between honey bee venom phospholipase A₂ (bvPLA₂) and the negatively charged DPPG bilayer. In both cases without and with the calcium ions (Ca²⁺), the bvPLA₂ molecules were adsorbed onto the outer leaflet surface with the orientational order, and the adsorbed bvPLA₂ molecules damaged the order of the packed outer leaflet. In comparison to the case without Ca²⁺, the addition of Ca²⁺ can accelerate the attaching process of bvPLA₂ to the outer leaflet surface and decelerate the process of damaging the outer leaflet order. The experimental result also confirmed, with the help of the Ca²⁺, the DPPG molecules in the outer leaflet were hydrolyzed, with both hydrolysates, that is, lysophospholipids and fatty acids, remaining at the interface, showing a distinct difference from previous published literatures regarding neutral lipids [Phys. Chem. Chem. Phys. 2018, 20, 63-67] and PLA₁ [Langmuir 2019, 35, 12831-12838].

Revealing Interfacial Lipid Hydrolysis Catalyzed by Phospholipase A1 at Molecular Level via Sum Frequency Generation Vibrational Spectroscopy and Fluorescence Microscopy

The interfacial hydrolysis of phospholipids catalyzed by phospholipase A₁ (PLA1) was studied via sum frequency generation (SFG) vibrational spectroscopy and fluorescence microscopy. Both monolayer and bilayer setups were used to confirm the hydrolysis mechanism. During the hydrolysis, lysophospholipids, one of the hydrolysis products, were desorbed from the interface into the solution, while the other products, fatty acids, self-organized and accumulated with PLA₁ at the interface to form the PLA₁-induced regions, which can serve as nonspecific binding domains for proteins and thus lead to human vascular diseases. This experimental study provides the essential information on revealing the interfacial biochemical process related to the metabolism of the lipids, which is one of the basic building blocks for cells.