Tuning the activity of the inert MoS2 surface via graphene oxide support doping towards chemical functionalization and hydrogen evolution: a density functional study

Advancements in Solid-State Hydrogen Storage: A Review on the Glass Microspheres

Glass microspheres, with their unique internal structure and chemical stability, offer a promising solution for the challenges of hydrogen storage and transmission, potentially advancing the utility of hydrogen as a safe and efficient energy source. In this review, we systematically evaluate various treatment and modification strategies, including fusion, sol-gel, and chemical vapor deposition (CVD), and compare the performance of different types of glass microspheres. Our synthesis of current research findings reveals that specific low-cost and environmentally friendly modification techniques can significantly enhance the hydrogen storage efficiency of glass microspheres, with some methods increasing storage capacity by up to 32% under certain conditions. Through a detailed life-cycle and cost-benefit assessment, our study highlights the economic and sustainability advantages of using modified glass microspheres. For example, selected alternative materials used in lightweight vehicles have been shown to reduce density by approximately 10% while reducing costs. This review not only underscores the contributions of modified glass microspheres to overcoming the limitations of current hydrogen storage technologies but also provides a systematic framework for improving their performance in hydrogen storage applications. Our research suggests that modified glass microspheres could help to make hydrogen energy more commercially viable and environmentally friendly.

Enhanced electrocatalytic hydrogen evolution from nitrogen plasma-tailored MoS2 nanostructures

Two-dimensional (2D) layered transition metal dichalcogenides such as MoS2 have been viewed as the most favorable candidates for replacing noble metals in catalyzing the hydrogen evolution reaction in water splitting owing to their earth abundance, superb chemical stability, and appropriate Gibbs free energy. However, due to its low number of catalytic sites and basal catalytic inertia, the pristine MoS2 displayed intrinsically unsatisfactory HER catalytic activity. Here, the hydrogen evolution catalytic activities of nanostructured MoS2 powder before and after plasma modification with nitrogen doping were experimentally compared, and the influence of treatment parameters on the hydrogen evolution catalytic performance of MoS2 has been studied. The feasibility of regulating hydrogen evolution catalytic activity by nitrogen doping of MoS2 was verified based on density functional theory calculations. Our work demonstrates a more convenient and faster way to develop cheap and efficient MoS2-based catalysts for electrochemical hydrogen evolution reactions. Additionally, theoretical studies reveal that N-doped MoS2 exhibits strong hybridization between Mo-d and N-p states, causing magnetism to evolve, as confirmed by experiments.

Controlling basal plane sulfur vacancy in water splitting MoSx/NiF electrocatalysts through electric-field-assisted pulsed laser ablation

Eco-friendly, efficient, and durable electrocatalysts from earth-abundant materials are crucial for water splitting through hydrogen and oxygen generation. However, available methods to fabricate electrocatalysts are either hazardous and time-consuming or require expensive equipment, hindering the large-scale, eco-friendly production of artificial fuels. Here, we present a rapid, single-step method for producing MoSx/NiF electrocatalysts with controlled sulfur-vacancies via electric-field-assisted pulsed laser ablation (EF-PLA) in liquid and in-situ deposition on nickel foam, enabling efficient water splitting. Electric-field parameters efficiently control S-vacancy active sites in electrocatalysts. Higher electric fields yield a MoSx/NiF electrocatalyst with a larger density of S-vacancy sites, suited for HER due to lower Gibbs free energy for H∗ adsorption, while lower electric fields produce an electrocatalyst with lower S-vacancy sites, better suited for OER, as shown by both experimental and theoretical results. The present work opens a horizon in designing high-efficiency catalysts, for a wide range of chemical reactions.

Investigations on Structural, Electronic and Optical Properties of MoS2/CDs Heterostructure via First-Principles Study

Much effort has been made for MoS2/CDs heterostructure application in the field of photocatalysts. However, the impacts of functional groups of CDs on the properties of the heterostructure are ambiguous. Here, the impacts of hydroxyl, carbonyl, and carboxyl groups of CDs on the structural, electronic, and optical properties of MoS2/CDs’ heterostructure were investigated by conducting a first-principles study. The calculated energy band structure and band gap of monolayer MoS2 were consistent with the experimental values. The band gap of MoS2 was obviously decreased after the construction of MoS2/CDs and MoS2/CDs–hydroxyl/carboxyl, thus helping to improve the light adsorption range. However, the band gap of MoS2/CDs–carbonyl was slightly increased compared with that of monolayer MoS2. The CDs with functional groups can spontaneously bind on 2D-MoS2 and form a stable MoS2/CDs heterostructure. It was confirmed that the MoS2/CDs’ heterostructure belongs to the typical type-II band alignment, which contributes to the separation of photogenerated charge and hole. Notably, the carbonyl and carboxyl groups on the CDs obviously reduced the optical absorption intensity of the MoS2/CDs in the ultraviolet region. The hydroxyl groups have little effect on optical absorption intensity. Thus, the CDs with more hydroxyl groups are beneficial to produce a higher photocatalytic performance. This paper reveals the impacts of surface functional groups and provides a promising approach for designing the MoS2/CDs’ heterostructure to enhance the photocatalytic properties.

Activation of the MoS2 Basal Plane to Enhance CO Hydrogenation to Methane Activity Through Increasing S Vacancies

The active site of MoS₂ is usually located at the edge of crystalline MoS₂, which has a lower proportion than that from the basal plane, limiting the hydrogenation activity. Therefore, activating the basal plane of MoS₂ is expected to greatly enhance the hydrogenation activity. Herein, we prepared a series of MoS₂ catalysts by acidolysis of ammonium tetrathiomolybdate and subsequently pyrolyzing at high temperature with different atmospheres. Through analysis, we found that the prepared MoS₂ catalysts were curved, which was different from commercial MoS₂. Through X-ray diffraction, transmission electron microscopy, and Raman and X-ray photoelectron spectroscopy characterization, it was found that the MoS₂ catalyst pyrolyzed under a N₂ atmosphere had a larger number of S-vacancies than the MoS₂ catalysts under a H₂ atmosphere. In addition, temperature-programmed reduction results showed that the Mo-S bond energy was decreased with the increasing content of S-vacancies, which might be related to bending. Sulfur-resistant methanation results indicated that the curved MoS₂ exhibited increased CO conversion with the increasing S vacancies. Furthermore, density functional theory calculation was used to simulate the generation of S vacancy and numbers of S vacancies. It was found that with the generation of S vacancy, three unsaturated coordination Mo atoms were exposed around one S vacancy and became new active sites, resulting in enhanced activity. What is more, the higher methanation activity was attributed not only from more S vacancies but also from the decreased activation energy for CO hydrogenation activation.

Size-dependent trends in the hydrogen evolution activity and electronic structure of MoS2 nanotubes

The thermodynamics of hydrogen evolution on MoS2 nanotubes is studied for the first time using periodic density functional theory calculations to obtain hydrogen adsorption free energies (ΔG Hads ) on pristine nanotubes and those with S-vacancy defects. Armchair and zigzag MoS2 nanotubes of different diameters, ranging from 12 to 22 Å, are examined. The H adsorption energy is observed to become more favourable (lower ΔG Hads ) as nanotube diameter decreases, with ΔG Hads values ranging from 1.82 to 1.39 eV on the pristine nanotubes, and from 0.03 to -0.30 eV at the nanotube S-vacancy defect sites. An ideal thermoneutral ΔG Hads value of nearly 0 eV is observed at the S-vacancy site on nanotubes around 20 to 22 Å in diameter. For the pristine nanotubes, density of states calculations reveal that electron transfer from S to Mo occurs during H adsorption, and the energy gap between these two states yields a highly reliable linear correlation with ΔG Hads , where a smaller gap leads to a more favourable hydrogen adsorption. For the S-vacancy defect site the H adsorption resembles that on a pure metallic surface, meaning that a traditional d-band centre model can be applied to explain the trends in ΔG Hads . A linear relation between the position of the Mo d-states and ΔG Hads is found, with d-states closer to the Fermi level leading to strong hydrogen adsorption. Overall this work highlights the relevance of MoS2 nanotubes as promising hydrogen evolution catalysts and explains trends in their activity using the energies of the electronic states involved in binding hydrogen.

Enhancing the hydrogen evolution activity of MoS2 basal planes and edges using tunable carbon-based supports

The hydrogen adsorption free energy (ΔG_Hads) on the basal plane and edges of MoS₂ is studied using periodic density functional theory, with the catalyst supported by a range of two-dimensional carbon-based materials. Understanding how ΔG_Hads can be tuned with support gives insight into MoS₂ as a catalyst for the hydrogen evolution reaction. The supports studied here include graphene oxide materials, heteroatom doped (S, B, and N) graphene, and some insulator materials (hexagonal boron nitride and graphitic carbon nitride). For the basal plane of MoS₂, a wide range of values for ΔG_Hads are observed (between 1.4 and 2.2 eV) depending on the support material used. It is found that ΔG_Hads relates directly to the energy of occupied p-orbital states in the MoS₂ catalyst, which is modified by the support material. On the Mo-edge of MoS₂, different supports induce smaller variations in ΔG_Hads, with values ranging between -0.27 and 0.09 eV. However, a graphene support doped with graphitic N atoms produces a ΔG_Hads value of exactly 0 eV, which is thermodynamically ideal for hydrogen evolution. Furthermore, ΔG_Hads is found to relate closely and linearly to the amount of charge transfer between MoS₂ and support when they adhere together. The support-induced tuning of ΔG_Hads on MoS₂ observed here provides a useful tool for improving current MoS₂ catalysts, and the discovery of variables which mediate changes in ΔG_Hads contributes to the rational design of new hydrogen evolution catalysts.

Theoretical investigation on the hydrogen evolution reaction mechanism at MoS2 heterostructures: the essential role of the 1T/2H phase interface

DFT calculations have been performed to study the HER mechanism at 1T/2H MoS₂ heterostructures. The HER activity along the 1T/2H phase interface is comparable with those at the Mo-edge of 2H MoS₂ and the basal plane of 1T MoS₂.

Hydrogen evolution reaction from bare and surface-functionalized few-layered MoS2 nanosheets in acidic and alkaline electrolytes

Hydrogen is considered as an ideal and sustainable energy carrier because of its high energy density and carbon-free combustion. Electrochemical water splitting is the only solution for uninterrupted, scalable, and sustainable production of hydrogen without carbon emission. However, a large-scale hydrogen production through electrochemical water splitting depends on the availability of earth-abundant electrocatalysts and a suitable electrolyte medium. In this article, we demonstrate that hydrogen evolution reaction (HER) performance of electrocatalytic materials can be controlled by their surface functionalization and selection of a suitable electrolyte solution. Here, we report syntheses of few-layered MoS₂ nanosheets, NiO nanoparticles (NPs), and multiwalled carbon nanotubes (MWCNTs) using scalable production methods from earth-abundant materials. Magnetic measurements of as-produced electrocatalyst materials demonstrate that MoS₂ nanoflakes are diamagnetic, whereas surface-functionalized MoS₂ and its composite with carbon nanotubes have strong ferromagnetism. The HER performance of the few-layered pristine MoS₂ nanoflakes, MoS₂/NiO NPs, and MoS₂/NiO NPs/MWCNT nanocomposite electrocatalysts are studied in acidic and alkaline media. For bare MoS₂, the values of overpotential (η₁₀) in alkaline and acidic media are 0.45 and 0.54 V, respectively. Similarly, the values of current density at 0.5 V overpotential are 27 and 6.2 mA/cm² in alkaline and acidic media, respectively. The surface functionalization acts adversely in the both alkaline and acidic media. MoS₂ nanosheets functionalized with NiO NPs also demonstrated excellent performance for oxygen evolution reaction with anodic current of ~60 mA/cm² and Tafel slope of 78 mVdec^-1 in alkaline medium.

Dependence of the Properties of 2D Nanocomposites Generated by Covalent Crosslinking of Nanosheets on the Interlayer Separation: A Combined Experimental and Theoretical Study

Covalently cross-linked heterostructures of 2D materials are a new class of materials which possess electrochemical and photochemical hydrogen evolution properties. It was of considerable interest to investigate the role of interlayer spacing in the nanocomposites involving MoS₂ and graphene sheets and its control over electronic structures and catalytic properties. We have investigated this problem with emphasis on the hydrogen evolution properties of these structures by a combined experimental and theoretical study. We have linked MoS₂ based nanocomposites with other 2D materials with varying interlayer spacing by changing the linker and studied their hydrogen evolution properties. The hydrogen evolution activity for these composites decreases with increasing linker length, which we can link to a decrease in magnitude of charge transfer across the layers with increasing interlayer spacing. Factors such as the nature of the sheets, interlayer distance as well as the nature of the linker provide pathways to tune the properties of covalently cross-linked 2D material rendering this new class of materials highly interesting.

Progress in Electrocatalytic Hydrogen Evolution Based on Monolayer Molybdenum Disulfide

Energy and environmental issues raise higher demands on the development of a sustainable energy system, and the electrocatalytic hydrogen evolution is one of the most important ways to realize this goal. Two-dimensional (2D) materials represented by molybdenum disulfide (MoS2) have been widely investigated as an efficient electrocatalyst for the hydrogen evolution. However, there are still some shortcomings to restrict the efficiency of MoS2 electrocatalyst, such as the limited numbers of active sites, lower intrinsic catalytic activity and poor interlayer conductivity. In this review, the application of monolayer MoS2 and its composites with 0D, 1D, and 2D nanomaterials in the electrocatalytic hydrogen evolution were discussed. On the basis of optimizing the composition and structure, the numbers of active sites, intrinsic catalytic activity, and interlayer conductivity could be significantly enhanced. In the future, the study would focus on the structure, active site, and interface characteristics, as well as the structure-activity relationship and synergetic effect. Then, the enhanced electrocatalytic activity of monolayer MoS2 can be achieved at the macro, nano and atomic levels, respectively. This review provides a new idea for the structural design of two-dimensional electrocatalytic materials. Meanwhile, it is of great significance to promote the study of the structure-activity relationship and mechanism in catalytic reactions.

Enhancing hydrogen evolution activity by doping and tuning the curvature of manganese-embedded carbon nanotubes

Doping heteroatoms (Mn and N) and tuning the curvature of carbon nanotubes could efficiently elevate the C p-band center, lower the absolute electrode potential, and thus enhance the HER performance.