Combined solid-state NMR, FT-IR and computational studies on layered and porous materials

Aquivion-Based Spray Freeze-Dried Composite Materials for the Cascade Production of γ-Valerolactone

The development of multifunctional catalysts is a necessary step to effectively carry out one-pot cascade reactions, such as that from furfural to γ-valerolactone. This research effort faces the challenge posed by the intrinsic limit of how many kinds of catalytic sites a single material can bear. In this work, the application of Spray-Freeze Drying (SFD) as a synthetic technique for the preparation of a wide range of innovative composite multi-functional catalysts is reported. Herein we show that by the proper combination of Aquivion as a highly active Brønsted acid catalyst and metal oxides as both support materials and Lewis acids (LAS) enable to achieve highly unique efficient and effective dual acid composite catalysts that are able to carry out the cascade reaction from furfural to γ-valerolactone. The dual catalytic system comprised of Aq/ZrO2 with 30 % polymer content prepared via spray-freeze drying exhibited GVL yields of 25 % after only 2 h at 180 °C and a remarkably high productivity of 4470 μmolGVL gCat -1 h-1, one of the highest reported results. Mechanistic studies based on experimental and advanced characterisation and spectroscopic techniques, such as, SEM, TEM, 15N MAS NMR and 19F MAS NMR indicate that activity arises from the proper tuning of BAS/LAS (Brønsted Acid Site/Lewis Acid Site) acidic properties.

A thermodynamic model of the surface hydroxylation of γ-Al2O3

Rational design of γ-alumina-based catalysts relies on an extensive understanding of the distribution of hydroxyl groups on the surface of γ-alumina and their physicochemical properties, which remain unclear and challenging to determine experimentally due to the structural complexity. In this work, by means of DFT and thermodynamic calculations, various hydroxylation modes of γ-alumina (110) and (100) surfaces at different OH coverages were evaluated, based on which a thermodynamic model to reflect the relationship between temperature and the surface structure was established and the stable hydroxylation modes under experimental conditions were predicted. This enables us to identify the experimentally measured IR spectra. The effect of hydroxyl coverages on the surface Lewis acidity was then analyzed, showing that the presence of hydroxyl groups could promote the Lewis acidity of neighboring Al sites. This work provides fundamental insights into the molecular level understanding of the surface properties of γ-alumina and benefits the rational design of alumina-based catalysts.

HT-NMR Studies of the Be-F Coordination Structure in FNaBe and FLiBe Mixed Salts

Molten NaF-BeF2 salt is widely considered a promising candidate to replace FLiBe in molten salt reactor applications, which is crucial to reducing the operating costs of the molten salt reactor. Studies on beryllium compounds are rarely conducted due to their volatility and high toxicity. Herein, the Be-F coordination structure of NaF/BeF2 mixed salts was investigated in-depth through various HT-NMR and solid-state NMR methods, which are optimized to be appropriate for the detection of beryllium compounds. It was found that Na2BeF4 and NaBeF3 crystals were transformed into amorphous tetrahedral coordinated networks when there was an increase in the BeF2 concentration in the mixed salts. The main coordinate structure comparisons between FNaBe and FLiBe were analyzed, which exhibit high similarity due to the covalent effect of Be-F bonding, demonstrating the theoretical feasibility of applying FNaBe salts as a substitute for FLiBe in MSR systems. In addition, the transition from the crystal phase to the amorphous phase occurred at a lower BeF2 concentration for FNaBe than that for FLiBe. This was further verified by the results of ab initio molecular dynamics (AIMD) simulation that FNaBe melts had more disordered structures, thus causing slight changes in their physical properties.

Aldehyde-containing clays: a sustainable approach against the olive tree pest, Bactrocera oleae

A set of organic/inorganic layered materials was obtained by functionalizing a montmorillonite-containing bentonite natural clay with linear aliphatic C6 or C7 aldehydes through a cost-effective and technologically simple incipient-wetness deposition method. The solids were investigated by means of a multi-technique approach (X-ray powder diffraction, XRPD, scanning electron microscopy, SEM, Fourier-transform infrared spectroscopy, FT-IR, thermogravimetric analysis, TGA, elemental analysis and solid-state nuclear magnetic resonance, ssNMR) to clarify the nature of the deposited organic species and the mode of interaction between the aldehyde and the clay. Since both natural clays and short-chain linear aldehydes find application as alternative strategies in the control of the olive fruit fly, Bactrocera oleae, the hybrid layered materials were tested under real-life conditions and their insect-inhibiting capability was evaluated in open-field trials on olive tree orchards in Tuscany, Central Italy. Specific tests were conducted to evaluate the resistance of the solids to weathering and their capability to provide a constant and long-lasting release of the bioactive ingredient. Aldehyde-containing bentonite clays have shown promising performance in controlling B. oleae infestation (with up to 86-95% reduction of affected olive fruits) in open-field trials across two years in two locations with different pedological and meteo-climatic characteristics.

Review and perspectives on TS-1 catalyzed propylene epoxidation

Titanium silicate zeolite (TS-1) is widely used in the research on selective oxidations of organic substrates by H2O2. Compared with the chlorohydrin process and the hydroperoxidation process, the TS-1 catalyzed hydroperoxide epoxidation of propylene oxide (HPPO) has advantages in terms of by-products and environmental friendliness. This article reviews the latest progress in propylene epoxidation catalyzed by TS-1, including the HPPO process and gas phase epoxidation. The preparation and modification of TS-1 for green and sustainable production are summarized, including the use of low-cost feedstocks, the development of synthetic routes, strategies to enhance mass transfer in TS-1 crystal and the enhancement of catalytic performance after modification. In particular, this article summarizes the catalytic mechanisms and advanced characterization techniques for propylene epoxidation in recent years. Finally, the present situation, development prospect and challenge of propylene epoxidation catalyzed by TS-1 were prospected.

Unveiling the mechanisms of carboxylic acid esterification on acid zeolites for biomass-to-energy: A review of the catalytic process through experimental and computational studies

In recent years, there has been significant interest from industrial and academic areas in the esterification of carboxylic acids catalyzed by acidic zeolites, as it represents a sustainable and economically viable approach to producing a wide range of high-value-added products. However, there is a lack of comprehensive reviews that address the intricate reaction mechanisms occurring at the catalyst interface at both the experimental and atomistic levels. Therefore, in this review, we provide an overview of the esterification reaction on acidic zeolites based on experimental and theoretical studies. The combination of infrared spectroscopy with atomistic calculations and experimental strategies using modulation excitation spectroscopy techniques combined with phase-sensitive detection is presented as an approach to detecting short-lived intermediates at the interface of zeolitic frameworks under realistic reaction conditions. To achieve this goal, this review has been divided into four sections: The first is a brief introduction highlighting the distinctive features of this review. The second addresses questions about the topology and activity of different zeolitic systems, since these properties are closely correlated in the esterification process. The third section deals with the mechanisms proposed in the literature. The fourth section presents advances in IR techniques and theoretical calculations that can be applied to gain new insights into reaction mechanisms. Finally, this review concludes with a subtle approach, highlighting the main aspects and perspectives of combining experimental and theoretical techniques to elucidate different reaction mechanisms in zeolitic systems.

Calculating 13 C NMR chemical shifts of large molecules using the eXtended ONIOM method at high accuracy with a low cost

Fragmentation-based methods for nuclear magnetic resonance (NMR) chemical shift calculations have become more and more popular in first-principles calculations of large molecules. However, there are many options for a fragmentation-based method to select, such as theoretical methods, fragmentation schemes, the number of levels of theory, etc. It is important to study the optimal combination of the options to achieve a good balance between accuracy and efficiency. Here we investigate different combinations of options used by a fragmentation-based method, the eXtended ONIOM (XO) method, for 13 C chemical shift calculations on a set of organic and biological molecules. We found that: (1) introducing Hartree-Fock exchange into density functional theory (DFT) could reduce the calculation error due to fragmentation in contrast to pure DFT functionals, while a hybrid functional, xOPBE, is generally recommended; (2) fragmentation schemes generated from the molecular tailoring approach (MTA) with small level parameter n, for example, n = 2 and the degree-based fragmentation method (DBFM) with n = 1, are sufficient to achieve satisfactory accuracy; (3) the two-level XO (XO2) NMR calculation is superior to the calculation with only one level of theory, as the second level (i.e., low level) of theory provides a way to well describe the long-range effect. These findings are beneficial to practical applications of fragmentation-based methods for NMR chemical shift calculations of large molecules.

Investigation of Brønsted acidity in zeolites through adsorbates with diverse proton affinities

Understanding the adsorption behavior of base probes in aluminosilicates and its relationship to the intrinsic acidity of Brønsted acid sites (BAS) is essential for the catalytic applications of these materials. In this study, we investigated the adsorption properties of base probe molecules with varying proton affinities (acetonitrile, acetone, formamide, and ammonia) within six different aluminosilicate frameworks (FAU, CHA, IFR, MOR, FER, and TON). An important objective was to propose a robust criterion for evaluating the intrinsic BAS acidity (i.e., state of BAS deprotonation). Based on the bond order conservation principle, the changes in the covalent bond between the aluminum and oxygen carrying the proton provide a good description of the BAS deprotonation state. The ammonia and formamide adsorption cause BAS deprotonation and cannot be used to assess intrinsic BAS acidity. The transition from ion-pair formation, specifically conjugated acid/base interaction, in formamide to strong hydrogen bonding in acetone occurs within a narrow range of base proton affinities (812-822 kJ mol^-1). The adsorption of acetonitrile results in the formation of hydrogen-bonded complexes, which exhibit a deprotonation state that follows a similar trend to the deprotonation induced by acetone. This allows for a semi-quantitative comparison of the acidity strengths of BAS within and between the different aluminosilicate frameworks.

Molecular Views on Mechanisms of Brønsted Acid-Catalyzed Reactions in Zeolites

The Brønsted acidity of proton-exchanged zeolites has historically led to the most impactful applications of these materials in heterogeneous catalysis, mainly in the fields of transformations of hydrocarbons and oxygenates. Unravelling the mechanisms at the atomic scale of these transformations has been the object of tremendous efforts in the last decades. Such investigations have extended our fundamental knowledge about the respective roles of acidity and confinement in the catalytic properties of proton exchanged zeolites. The emerging concepts are of general relevance at the crossroad of heterogeneous catalysis and molecular chemistry. In the present review, emphasis is given to molecular views on the mechanism of generic transformations catalyzed by Brønsted acid sites of zeolites, combining the information gained from advanced kinetic analysis, in situ, and operando spectroscopies, and quantum chemistry calculations. After reviewing the current knowledge on the nature of the Brønsted acid sites themselves, and the key parameters in catalysis by zeolites, a focus is made on reactions undergone by alkenes, alkanes, aromatic molecules, alcohols, and polyhydroxy molecules. Elementary events of C-C, C-H, and C-O bond breaking and formation are at the core of these reactions. Outlooks are given to take up the future challenges in the field, aiming at getting ever more accurate views on these mechanisms, and as the ultimate goal, to provide rational tools for the design of improved zeolite-based Brønsted acid catalysts.

Immobilization of Alendronate on Zirconium Phosphate Nanoplatelets

Different amounts of sodium-alendronate (ALN) were loaded into layered zirconium phosphates of alpha and gamma type (αZP and γZP) by means of topotactic exchange reactions of phosphate with ALN. In order to extend the exchange process to the less accessible interlayer regions, ALN solutions were contacted with colloidal dispersions of the layered solids previously exfoliated in single sheets by means of intercalation reaction of propylamine (for αZP) or acetone (for γZP). The ALN loading degree was determined by liquid P-nuclear magnetic resonance (NMR) and inductively coupled plasma (ICP), and it was reported as ALN/Zr molar ratios (Rs). The maximum R obtained for γZP was 0.34, while αZP was able to load a higher amount of ALN, reaching Rs equal to 1. The synthesized compounds were characterized by X-ray powder diffractometry, scanning electron microscopy (SEM), solid-state NMR, and infrared spectroscopy. The way the grafted organo-phosphonate groups were bonded to the layers of the host structure was suggested. The effect of ZP derivatives was assessed on cell proliferation, and the results showed that after 7 days of incubation, none of the samples showed a decrease in cell proliferation.

Mixed Zirconium Phosphate Bis-Phosphonomethyl Glycine from Nanocrystalline α-Zirconium Phosphate: A Tailored Suite for Gold Nanoparticles

A novel synthetic approach was investigated for the preparation of nanoplatelets of mixed zirconium phosphate bis-phosphonomethyl glycine, ZPGly, by the reaction of a gel of nanocrystalline α-type zirconium phosphate with N,N-bis-phosphonomethyl glycine, H₃Gly. The syntheses were carried out in the absence of hydrofluoric acid by changing both the reagent relative amounts and temperature. An H₃Gly/Zr molar ratio >2 did not significantly improve the degree of crystallinity of the materials, while an increase of temperature from 80 °C to 120 °C improved the crystallinity; the best result was obtained with H₃Gly/Zr molar ratio = 2 and with a temperature reaction of 120 °C. The sample consisted of nanoplatelets with the size in the range 20-40 nm, and it was successfully exfoliated by treatment with a solution of methylamine. By treatment of the ZPGly colloidal dispersions with HAuCl₄, a color change from white to red-violet was observed, indicating the formation of gold nanoparticles. The size and morphology of the gold particles were affected by the degree of crystallinity and, in turn, by the composition of the ZPGly support. As a matter of fact, large micrometric Au particles with a cubo-octahedral morphology were obtained by using the less crystalline ZPGly_R2-80 sample, while interconnected Au particles, with a size of about 16 nm, were obtained by using ZPGly_R2-120. The samples exhibited an absorption maximum in the visible region due to the surface plasmon resonance of gold nanoparticles.

Influence of Pore Size in Benzoin Condensation of Furfural Using Heterogenized Benzimidazole Organocatalysts

A designed N-heterocyclic carbene (NHC) catalyst was covalently anchored on a range of mesoporous and hierarchical supports, to study the influence of pore size in the benzoin condensation of furfural. The structural and spectroscopic characteristics of the anchored catalysts were investigated, also with the help of molecular dynamics simulations, in order to rationalize the degree of stability and recyclability of the heterogenized organocatalysts. Quantitative yields (99 %) and complete recyclability were maintained after several cycles, vindicating the design rationale.

A novel route to enhance the dissolution of apatite: Structural incorporation of hydrogen phosphate

Potential use of hydroxyapatite nanoparticles (HANPs) [Ca₁₀(PO₄)₆(OH)₂] as slow P-release fertilizer (SRF) has recently attracted wider attention. However, commercially available HANP (with Ca/P ratio = 1.667) is the least soluble calcium phosphate and thus limits its full potential as an SRF in agronomic applications. In this research, we sought to enhance the dissolution rate of HANPs by enriching hydrogen phosphate (HPO₄^2-) species in the phosphate (PO₄^3-) structural sites. Seven different types of pure crystalline HANPs were synthesized at a range of Ca/P ratio from 1.46 (at pH 6.0) to 2.10 (at pH 12.0). Complementary results from FTIR and solid-state ³¹P MAS NMR spectroscopies showed that HPO₄^2- species is most abundant in HANPs crystallized at pH 6.0 and gradually depleted at higher pH products. The rate of depletion of HPO₄^2- species is proportional to the increase in carbonate incorporation into the HANP lattice, which preferentially forms B-type carbonated HANPs. The enhanced dissolution rate of HANPs due to hydrogen phosphate incorporation was tested using a flow-through macro-dialysis system that limits the partial transition of HANPs to other solid phases, which otherwise interfere with dissolution. The results show that the dissolution rate of HANPs increased with decreasing pH of synthesis and was highest in HANPs at pH 6.0. The dissolution rate differed by ten times between HANPs synthesized at pH 7.0 and 10.0. Overall, the atom-efficient synthetic route developed and the ability to tune the dissolution rate of HANPs are significant steps forward in improving the P-release efficiency of a potent SRF and is expected to contribute to efforts toward enhancing agricultural sustainability.

Impregnation of Synthetic Saponites with Aldehydes: A Green Approach in the Intercalation of Bioactive Principles

Synthetic saponite clay was impregnated with either linear saturated or unsaturated aldehydes through an incipient-wetness deposition approach. To increase the aldehyde loading, saponite was also intercalated with positively charged cetyltrimethylammonium (CTA+) species, aiming to expand the clay gallery and to increase the hydrophobic character of the host solid. A multitechnique, physicochemical investigation was performed on the organic–inorganic hybrid solids. The analyses revealed that the aldehydes are mainly adsorbed on the clay particles’ surface, with a small fraction inside the interlayer space. In CTA+-modified saponites, the concentration of saturated aldehydes was higher than the one observed in the pure clay. These features are quite promising for the development of novel layered solids containing bioactive molecules for ecocompatible and economically sustainable applications, especially in agriculture, for the development of innovative hybrid materials for crop protection.

High‐Field NMR, Reactivity, and DFT Modeling Reveal the γ‐Al 2 O 3 Surface Hydroxyl Network**

Aluminas are strategic materials used in many major industrial processes, either as catalyst supports or as catalysts in their own right. The transition alumina γ‐Al₂O₃ is a privileged support, whose reactivity can be tuned by thermal activation. This study provides a qualitative and quantitative assessment of the hydroxyl groups present on the surface of γ‐Al₂O₃ at three different dehydroxylation temperatures. The principal [AlOH] configurations are identified and described in unprecedented detail at the molecular level. The structures were established by combining information from high‐field ¹H and ²⁷Al solid‐state NMR, IR spectroscopy and DFT calculations, as well as selective reactivity studies. Finally, the relationship between the hydroxyl structures and the molecular‐level structures of the active sites in catalytic alkane metathesis is discussed.

Metal Sites in Zeolites: Synthesis, Characterization, and Catalysis

Zeolites with ordered microporous systems, distinct framework topologies, good spatial nanoconfinement effects, and superior (hydro)thermal stability are an ideal scaffold for planting diverse active metal species, including single sites, clusters, and nanoparticles in the framework and framework-associated sites and extra-framework positions, thus affording the metal-in-zeolite catalysts outstanding activity, unique shape selectivity, and enhanced stability and recyclability in the processes of Brønsted acid-, Lewis acid-, and extra-framework metal-catalyzed reactions. Especially, thanks to the advances in zeolite synthesis and characterization techniques in recent years, zeolite-confined extra-framework metal catalysts (denoted as metal@zeolite composites) have experienced rapid development in heterogeneous catalysis, owing to the combination of the merits of both active metal sites and zeolite intrinsic properties. In this review, we will present the recent developments of synthesis strategies for incorporating and tailoring of active metal sites in zeolites and advanced characterization techniques for identification of the location, distribution, and coordination environment of metal species in zeolites. Furthermore, the catalytic applications of metal-in-zeolite catalysts are demonstrated, with an emphasis on the metal@zeolite composites in hydrogenation, dehydrogenation, and oxidation reactions. Finally, we point out the current challenges and future perspectives on precise synthesis, atomic level identification, and practical application of the metal-in-zeolite catalyst system.

Atomic imaging of zeolite-confined single molecules by electron microscopy

Single-molecule imaging with atomic resolution is a notable method to study various molecular behaviours and interactions^1-5. Although low-dose electron microscopy has been proved effective in observing small molecules^6-13, it has not yet helped us achieve an atomic understanding of the basic physics and chemistry of single molecules in porous materials, such as zeolites^14-16. The configurations of small molecules interacting with acid sites determine the wide applications of zeolites in catalysis, adsorption, gas separation and energy storage^17-21. Here we report the atomic imaging of single pyridine and thiophene confined in the channel of zeolite ZSM-5 (ref. ²²). On the basis of integrated differential phase contrast scanning transmission electron microscopy (iDPC-STEM)^23-25, we directly observe the adsorption and desorption behaviours of pyridines in ZSM-5 under the in situ atmosphere. The adsorption configuration of single pyridine is atomically resolved and the S atoms in thiophenes are located after comparing imaging results with calculations. The strong interactions between molecules and acid sites can be visually studied in real-space images. This work provides a general strategy to directly observe these molecular structures and interactions in both the static image and the in situ experiment, expanding the applications of electron microscopy to the further study of various single-molecule behaviours with high resolution.

Thermal Alteration in Adsorption Sites over SAPO‐34 Zeolite

Zeolites have found tremendous applications in the chemical industry. However, the dynamic nature of their active sites under the flow of adsorbate molecules for adsorption and catalysis is unclear, especially in operando conditions, which could be different from the as‐synthesized structures. In the present study, we report a structural transformation of the adsorptive active sites in SAPO‐34 zeolite by using acetone as a probe molecule under various temperatures. The combination of solid‐state nuclear magnetic resonance, in situ variable‐temperature synchrotron X‐ray diffraction, and in situ diffuse‐reflectance infrared Fourier‐transform spectroscopy allow a clear identification and quantification that the chemisorption of acetone can convert the classical Brønsted acid site adsorption mode to an induced Frustrated Lewis Pairs adsorption mode at increasing temperatures. Such facile conversion is also supported by the calculations of ab‐initio molecular‐dynamics simulations. This work sheds new light on the importance of the dynamic structural alteration of active sites in zeolites with adsorbates at elevated temperatures.

Visualizing the Entire Range of Noncovalent Interactions in Nanocrystalline Hybrid Materials Using 3D Electron Diffraction

Noncovalent interactions are essential in the formation and properties of a diverse range of hybrid materials. However, reliably identifying the noncovalent interactions in nanocrystalline materials remains challenging using conventional methods such as X-ray diffraction and spectroscopy. Here, we demonstrate that accurate atomic positions including hydrogen atoms can be determined using three-dimensional electron diffraction (3D ED), from which the entire range of noncovalent interactions in a nanocrystalline aluminophosphate hybrid material SCM-34 are directly visualized. The protonation states of both the inorganic and organic components in SCM-34 are determined from the hydrogen positions. All noncovalent interactions, including hydrogen-bonding, electrostatic, π–π stacking, and van der Waals interactions, are unambiguously identified, which provides detailed insights into the formation of the material. The 3D ED data also allow us to distinguish different types of covalent bonds based on their bond lengths and to identify an elongated terminal P=O π-bond caused by noncovalent interactions. Our results show that 3D ED can be a powerful tool for resolving detailed noncovalent interactions in nanocrystalline materials. This can improve our understanding of hybrid systems and guide the development of novel functional materials.

Silica Particles Derived from Natural Kaolinite for the Removal of Rhodamine B from Polluted Water

This manuscript deals with the thermal and chemical modification of a natural kaolinite that shows excellent performance in the capture of a cationic organic pollutant from the aqueous phase. Kaolinite was calcined at 700 °C and treated with HCl to remove aluminium and to obtain a siliceous material. The structural changes and the physico-chemical properties of the materials at different stages of thermal and chemical modification were investigated with several techniques, including XRPD, MAS-NMR, SEM-EDX, FT-IR, and N2 physisorption at 77 K. The ability of the parent kaolinite and siliceous material to capture the organic dye, Rhodamine B, from the aqueous phase was investigated by means of UV-Vis spectroscopy. The siliceous material exhibited better adsorption capacity with respect to the parent kaolinite. Finally, the functional stability of the siliceous material was tested over three cycles of regeneration and adsorption.

Brønsted acidity in zeolites measured by deprotonation energy

Acid forms of zeolites have been used in industry for several decades but scaling the strength of their acid centers is still an unresolved and intensely debated issue. In this paper, the Brønsted acidity strength in aluminosilicates measured by their deprotonation energy (DPE) was investigated for FAU, CHA, IFR, MOR, FER, MFI, and TON zeolites by means of periodic and cluster calculations at the density functional theory (DFT) level. The main drawback of the periodic DFT is that it does not provide reliable absolute values due to spurious errors associated with the background charge introduced in anion energy calculations. To alleviate this problem, we employed a novel approach to cluster generation to obtain accurate values of DPE. The cluster models up to 150 T atoms for the most stable Brønsted acid sites were constructed on spheres of increasing diameter as an extension of Harrison's approach to calculating Madelung constants. The averaging of DPE for clusters generated this way provides a robust estimate of DPE for investigated zeolites despite slow convergence with the cluster size. The accuracy of the cluster approach was further improved by a scaled electrostatic embedding scheme proposed in this work. The electrostatic embedding model yields the most reliable values with the average deprotonation energy of about 1245 ± 9 kJ·mol^-1 for investigated acidic zeolites. The cluster calculations strongly indicate a correlation between the deprotonation energy and the zeolite framework density. The DPE results obtained with our electrostatic embedding model are highly consistent with the previously reported QM/MM and periodic calculations.

Application of solid-state NMR techniques for structural characterization of metal-organic frameworks

Solid-state NMR can afford the structural information about the chemical composition, local environment, and spatial coordination at the atomic level, which has been extensively applied to characterize the detailed structure and host-guest interactions in metal-organic frameworks (MOFs). In this review, recent advances for the structural characterizations of MOFs using versatile solid-state NMR techniques were briefly introduced. High-field sensitivity-enhanced solid-state NMR method enabled the direct observation of metal centers in MOFs containing low-γ nuclei. Two-dimensional (2D) homo- and hetero-nuclear correlation MAS NMR experiments provided the spatial proximity among linkers, metal clusters and the introduced guest molecules. Moreover, quantitative measurement of inter-nuclear distances using solid-state NMR provided valuable structural information about the connectivity geometry as well as the host-guest interactions within MOFs. Furthermore, solid-state NMR has exhibited great potential for unraveling the structure property of MOFs containing paramagnetic metal centers.

Investigation of n-Heptane Hydroisomerization over Alkali-acid-treated Hierarchical Pt/ZSM-22 Zeolites

The design of various hierarchical and morphology ZSM-22 zeolite catalysts is attempted through the post-treatment of different concentrations of NaOH and subsequently, deals with HCl solution including fluosilicic acid (H2SiF6)...

Hydroxyl environments in zeolites probed by deuterium solid-state MAS NMR combined with IR spectroscopy

Deuterium (2D) solid-state MAS NMR spectroscopy is used for the first time for identifying both silanols and Brønsted acid sites in zeolites. The environments of hydroxyl groups in faujasite-type zeolites...

Infrared spectroscopic monitoring of solid-state processes

We put a spotlight on IR spectroscopic investigations in materials science by providing a critical insight into the state of the art, covering both fundamental aspects, examples of its utilisation, and current challenges and perspectives focusing on the solid state.

Combined spectroscopic and computational study for optimising catalyst design in hydrocarbon transformations

Molecular interactions of hydrocarbons within the confined pores of heterogeneous catalysts can influence reaction pathways, which play a crucial role in determining the overall efficacy of catalytic transformations. We probe...

Kinetic 2D Crystals via Topochemical Approach

The designing of novel materials is a fascinating and innovative pathway in materials science. Particularly, novel layered compounds have tremendous influence in various research fields. Advanced fundamental studies covering various aspects, including reactants and synthetic methods, are required to obtain novel layered materials with unique physical and chemical properties. Among the promising synthetic techniques, topochemical approaches have afforded the platform for widening the extent of novel 2D materials. Notably, the synthesis of binary layered materials is considered as a major scientific breakthrough after the synthesis of graphene as they exhibit a wide spectrum of material properties with varied potential applicability. In this review, a comprehensive overview of the progress in the development of metastable layered compounds is presented. The various metastable layered compounds synthesized from layered ternary bulk materials through topochemical approaches are listed, followed by the descriptions of their mechanisms, structural analyses, characterizations, and potential applications. Finally, an essential research direction concerning the synthesis of new materials is indicated, wherein the possible application of topochemical approaches in unprecedented areas is explored.

Zeolite-Tailored Active Site Proximity for the Efficient Production of Pentanoic Biofuels

Biofuel production can alleviate reliance on fossil resources and thus carbon dioxide emission. Hydrodeoxygenation (HDO) refers collectively to a series of important biorefinery processes to produce biofuels. Here, well-dispersed and ultra-small Ru metal nanoclusters (ca. 1 nm), confined within the micropores of zeolite Y, provide the required active site intimacy, which significantly boosts the chemoselectivity towards the production of pentanoic biofuels in the direct, one-pot HDO of neat ethyl levulinate. Crucial for improving catalyst stability is the addition of La, which upholds the confined proximity by preventing zeolite lattice deconstruction during catalysis. We have established and extended an understanding of the "intimacy criterion" in catalytic biomass valorization. These findings bring new understanding of HDO reactions over confined proximity sites, leading to potential application for pentanoic biofuels in biomass conversion.

Adsorption Features of Various Inorganic Materials for the Drug Removal from Water and Synthetic Urine Medium: A Multi-Technique Time-Resolved In Situ Investigation

Pharmaceutical active compounds, including hundreds of different substances, are counted among the emerging contaminants in waterbodies, whose presence raises a growing concern for the ecosystem. Drugs are metabolized and excreted mainly through urine as an unchanged active ingredient or in the form of metabolites. These emerging contaminants are not effectively removed with the technologies currently in use, making them a relevant environmental problem. This study proposes the treatment of urine and water at the source that can allow an easier removal of dissolved drugs and metabolites. The treatment of synthetic urine, with dissolved ibuprofen as a model compound, by adsorption, using various classes of inorganic materials, such as clays, hierarchical zeolites and ordered mesoporous silica (MCM-41), is presented. A multi-technique approach involving X-ray powder diffraction, solid-state NMR, UV-Vis and Raman spectroscopies was employed to investigate the adsorption process in inorganic adsorbents. Moreover, the uptake, the ensuing competition, the efficiency and selectivity as well as the packing of the model compound in ordered mesoporous silica during the incipient wetness impregnation process were all thoroughly monitored by a novel approach, involving combined complementary time-resolved in situ ¹H and ¹³C MAS NMR spectroscopy as well as X-ray powder diffraction.

Adsorption Behavior of Lead Ions from Wastewater on Pristine and Aminopropyl-Modified Blast Furnace Slag

The potential possibility of blast furnace slag as a low-cost adsorbent to remove lead ions from wastewater was investigated in detail in the present work. Both single factor experiment and orthogonal experiment were performed to reveal the effect of pH, adsorption temperature, contact time and initial concentration of lead ions on the adsorption performance of pristine slag. In order to make clear the correlation between the lead ion adsorption performance and the structure of slag, solid state nuclear magnetic resonance (NMR) was conducted to reveal the network structure and X-ray fluorescence (XRF) was used to calculate the nonbridging oxygen in the network-forming tetrahedra. For the purpose of improving the adsorption performance, γ-aminopropyltriethoxysilane (APTES) was adopted to modify the slag via post-grafting method. The results show that the slag is predominately composed of SiO2, Al2O3, CaO and MgO, exhibiting an amorphous network structure based on SiO4 and AlO4 tetrahedra. The conditions for adsorption can be optimized as follows: a pH of 7, an adsorption temperature of 60 °C, a contact time of 120 min and an initial lead ion concentration of 40 mg·L−1. Under the optimal conditions, a removal rate of 99.98% and an adsorption capacity of 49.99 mg·g−1 are obtained for the pristine slag. The adsorption complies with the Langmuir model thermodynamically and conforms to the pseudo-second order model kinetically. It is noted that aminopropyl-modification has considerably enhanced the removal rate of lead ions from 20.71 to 64.32% and the adsorption capacity from 29.01 to 96.48 mg·g−1 since amino groups (-NH2) are more inclined to form a complex with lead ions than hydroxyl groups due to the higher nucleophilicity of amino groups than that of hydroxyl groups. However, it is necessary to develop more low-cost modification agents in the future work.

Predicting the Conformation of Organic Catalysts Grafted on Silica Surfaces with Different Numbers of Tethering Chains: The Silicopodality Concept

Hybrid catalysts are attracting much attention, since they combine the versatility and efficiency of homogeneous organic catalysis with the robustness and thermal stability of solid materials, for example, mesoporous silica; in addition, they can be used in cascade reactions, for exploring both organic and inorganic catalysis at the same time. Despite the importance of the organic/inorganic interface in these materials, the effect of the grafting architecture on the final conformation of the organic layer (and hence its reactivity) is still largely unexplored. Here, we investigate a series of organosiloxanes comprising a pyridine ring (the catalyst model) and different numbers of alkylsiloxane chains used to anchor it to the MCM-41 surface. The hybrid interfaces are characterized with X-ray powder diffraction, thermogravimetric analyses, Fourier-transform infrared spectroscopy, nuclear magnetic resonance techniques and are modeled theoretically through molecular dynamics (MD) simulations, to determine the relationship between the number of chains and the average position of the pyridine group; MD simulations also provide some insights about temperature and solvent effects.

Bifunctional Paramagnetic and Luminescent Clays Obtained by Incorporation of Gd3+ and Eu3+ Ions in the Saponite Framework

A novel bifunctional saponite clay incorporating gadolinium (Gd3+) and europium (Eu3+) in the inorganic framework was prepared by one-pot hydrothermal synthesis. The material exhibited interesting luminescent and paramagnetic features derived from the co-presence of the lanthanide ions in equivalent structural positions. Relaxometry and photoluminescence spectroscopy shed light on the chemical environment surrounding the metal sites, the emission properties of Eu3+, and the dynamics of interactions between Gd3+ and the inner-sphere water placed in the saponite gallery. The optical and paramagnetic properties of this solid make it an attractive nanoplatform for bimodal diagnostic applications.

Enhanced uranium removal from acidic wastewater by phosphonate-functionalized ordered mesoporous silica: Surface chemistry matters the most

The removal of uranium species from aqueous phases using non-hazardous chemicals is still an open challenge, and remediation by adsorption is a prosperous strategy. Among the most crucial concerns regarding the design of an efficient material as adsorbent are, except the cost and the green character, the feasibility to be stable and effective under acidic pH, and to selectively adsorb the desired metal ion (e.g. uranium). Herein, we present a phosphonate functionalized ordered mesoporous silica (OMS-P), prepared by a one-step co-condensation synthesis. The physicochemical features of the material were determined by HR-TEM, XPS, EDX, N₂ sorption, and solid NMR, while the surface zeta potential was also measured. The removal efficiency was evaluated at two different temperatures (20 and 50 °C) in acidic environment to avoid interferences like solid phase formation or carbonate complexation and the adsorption isotherms, including data fitting with Langmuir and Freundlich models and thermodynamic parameters are presented and discussed. The high and homogeneous dispersion of the phosphonate groups within the entire silica's structure led to the greatest reported up-todays capacity (345 mg/g) at pH = 4, which was achieved in less than 10 min. Additionally, OMS-P showed that the co-presence of other polyvalent cation like Eu(III) did not affect the efficiency of adsorption, which occurs via inner-sphere complex formation. The comparison to the non-functionalized silica (OMS) revealed that the key feature towards an efficient, stable, and selective removal of the U(VI) species is the specific surface chemistry rather than the textural and structural features. Based on all the results and spectroscopic validations of surface adsorbed U(VI), the main interactions responsible for the elevated uranium removal were proposed.

Observing a Zeolite Nucleus (Subcrystal) with a Uniform Framework Structure and Its Oriented Attachment without Single-Molecule Addition

Multiple and complex crystallization process of zeolite including complementary single-molecule condensation and particle assembly, and alternately dominant nucleation and growth behavior, plays the critical role in zeolite crystallization but meanwhile makes us hard to study the respective effects. Herein, we strip nuclei from the synthetic solution and find that high-ordered nucleus (subcrystal) is the premise to ignite high-speed growth of zeolite crystal. The high-ordered subcrystals with the size of only 6-10 nm possess regular aperture structure and microporous area similar to zeolite nanocrystal. Interestingly, a unitary oriented aggregation process of the subcrystals towards nanosheets is well observed and characterized where single-molecule addition process is greatly repressed. If a wider range of zeotype nuclei can be expanded, a new synthetic strategy of zeotype materials with heterogeneous framework and active sites may be expected, which may novelize zeolite catalytic properties.

In Situ Observation of Non-Classical 2-Norbornyl Cation in Confined Zeolites at Ambient Temperature

Carbonium ions are an important class of reaction intermediates, but their dynamic evolution is difficult to be monitored by in situ techniques under experimental conditions because of their extremely short lifetime. Probably the most famous case is 2-norbornyl cation (2NB⁺ ): its existing form (classical or non-classical) had been debated for decades, until the concrete proof of non-classical geometry was achieved by X-ray crystallographic characterization at ultra-low temperature (40 K) and super acidic environment. However, we lack the understanding about 2NB⁺ at ambient conditions. Herein, by taking advantage of the confinement effect and delocalized acidic environment of zeolites, we successfully stabilized 2NB⁺ and unequivocally confirmed its "non-classical" structure inside the ZSM-5 zeolite by ab initio molecular dynamics simulations and ¹³ C solid-state nuclear magnetic resonance experiments. It is the first time to in situ observe the non-classical 2NB⁺ without the super acidic environment at ambient temperature, which provides a new strategy to expand the carbocation chemistry.

Mechanism of Hydration and Hydration Induced Structural Changes of Calcium Alginate Aerogel

The most relevant properties of polysaccharide aerogels in practical applications are determined by their microstructures. Hydration has a dominant role in altering the microstructures of these hydrophilic porous materials. To understand the hydration induced structural changes of monolithic Ca-alginate aerogel, produced by drying fully cross-linked gels with supercritical CO₂, the aerogel was gradually hydrated and characterized at different states of hydration by small-angle neutron scattering (SANS), liquid-state nuclear magnetic resonance (NMR) spectroscopy, and magic angle spinning (MAS) NMR spectroscopy. First, the incorporation of structural water and the formation of an extensive hydration sphere mobilize the Ca-alginate macromolecules and induce the rearrangement of the dry-state tertiary and quaternary structures. The primary fibrils of the original aerogel backbone form hydrated fibers and fascicles, resulting in the significant increase of pore size, the smoothing of the nanostructured surface, and the increase of the fractal dimension of the matrix. Because of the formation of these new superstructures in the hydrated backbone, the stiffness and the compressive strength of the aerogel significantly increase compared to its dry-state properties. Further elevation of the water content of the aerogel results in a critical hydration state. The Ca-alginate fibers of the backbone disintegrate into well-hydrated chains, which eventually form a quasi-homogeneous hydrogel-like network. Consequently, the porous structure collapses and the well-defined solid backbone ceases to exist. Even in this hydrogel-like state, the macroscopic integrity of the Ca-alginate monolith is intact. The postulated mechanism accounts for the modification of the macroscopic properties of Ca-alginate aerogel in relation to both humid and aqueous environments.