Close-Contact Oxygen Vacancies Synthesized by FSP Promote the Supplement of Active Oxygen Species To Improve the Catalytic Combustion Performance of Toluene

Catalytic combustion is an important means to reduce toluene pollution, and improving the performance of catalytic combustion catalysts is of great significance for practical applications. The study of oxygen vacancies is one of the key steps to improve catalyst performance. Here, two different oxygen vacancy structures were well-defined and controllably synthesized by flame spray pyrolysis (FSP) to evaluate their effect on the catalytic combustion performance of toluene. The closely contacted oxygen vacancies (c-Vo) enhance the oxygen activation capacity of the catalyst, and the temperature of the first oxygen desorption peak and hydrogen reduction peak is 56 and 37 °C lower than the separated oxygen vacancy (s-Vo) sample, respectively. The oxygen activation energy barrier on the c-Vo is calculated to be negligible of only 0.04 eV. Both in situ DRIFT and DFT calculations indicate that the c-Vo structure accelerates the catalytic oxidation of p-toluene molecules. Moreover, due to the unique characteristics of high-temperature synthesis and rapid quenching, FSP brings excellent water resistance and high-temperature stability to the catalyst. In conclusion, utilizing the FSP in situ reduction strategy can create more c-Vo to improve the catalytic combustion performance of toluene.

Studies of adsorption of α,β-unsaturated carbonyl compounds on heterogeneous Au/CeO2, Au/TiO2 and Au/SiO2 catalysts during reduction by hydrogen

Our research focuses on phenomena accompanying adsorption of mesityl oxide (4-methylpent-3-en-2-one) on the surface of heterogeneous supported gold catalysts: Au/CeO₂, Au/TiO₂ and Au/SiO₂. We have studied reduction in the gas phase of (volatile) α,β-unsaturated carbonyl compounds (R-(V)ABUCC) which mesityl oxide is a basic model of. In situ infrared (IR) spectroscopy was employed to establish that the most active catalysts allow adsorption of conjugated ketones or aldehydes in the enolate (i.e. bridge-like adsorption through the oxygen from the carbonyl group and the β-carbon) and carboxylic form or with the ^αC Created by potrace 1.16, written by Peter Selinger 2001-2019 ]]> ^βC double bond on a Lewis acidic site. Reductive properties of the catalysts and pure supports were studied by temperature-programmed reduction (TPR). We show that cerium(iv) oxide (CeO₂, ceria) and titanium(iv) oxide (TiO₂, titania) when decorated with gold nanoparticles (AuNP) can interact with hydrogen at temperatures approx. 150 °C lower than typical for pure oxides what includes even cyclic adsorption and instant release of H₂ below 100 °C in the case of gold–ceria system. Morphology and structure characterisation by transmission electron microscopy (TEM) and powder X-ray diffraction (PXRD) confirms that, with the obtained Au loadings, we achieved excellent dispersion of AuNPs while maintaining their small size, preferably below 5 nm, even though the Au/CeO₂ catalyst contained broad distribution of AuNPs sizes.

We deliver spectroscopic IR data describing the adsorption phenomena accompanying reduction of conjugated carbonyl compounds aided by heterogeneous catalysts.

The facet effect of ceria nanoparticles on platinum dispersion and catalytic activity of methanol partial oxidation

The effect of platinum-supported nano-shaped ceria catalysts on methanol partial oxidation and methyl formate product selectivity has been investigated. A Pt-supported CeO2 nanocube catalyst had a higher turnover frequency than nanosphere catalysts; however, nanosphere catalysts showed higher selectivity towards methyl formate. The observed ceria shape effect in catalysis was associated with the shape-dependent Pt dispersion and its oxidation states. Furthermore, in situ studies revealed that the reduced platinum and mono-dentate methoxy group were responsible for the higher turnover frequency.

Facet-Dependent Reactivity of Ceria Nanoparticles Exemplified by CeO2-Based Transition Metal Catalysts: A Critical Review

The rational design and fabrication of highly-active and cost-efficient catalytic materials constitutes the main research pillar in catalysis field. In this context, the fine-tuning of size and shape at the nanometer scale can exert an intense impact not only on the inherent reactivity of catalyst’s counterparts but also on their interfacial interactions; it can also opening up new horizons for the development of highly active and robust materials. The present critical review, focusing mainly on our recent advances on the topic, aims to highlight the pivotal role of shape engineering in catalysis, exemplified by noble metal-free, CeO2-based transition metal catalysts (TMs/CeO2). The underlying mechanism of facet-dependent reactivity is initially discussed. The main implications of ceria nanoparticles’ shape engineering (rods, cubes, and polyhedra) in catalysis are next discussed, on the ground of some of the most pertinent heterogeneous reactions, such as CO2 hydrogenation, CO oxidation, and N2O decomposition. It is clearly revealed that shape functionalization can remarkably affect the intrinsic features and in turn the reactivity of ceria nanoparticles. More importantly, by combining ceria nanoparticles (CeO2 NPs) of specific architecture with various transition metals (e.g., Cu, Fe, Co, and Ni) remarkably active multifunctional composites can be obtained due mainly to the synergistic metalceria interactions. From the practical point of view, novel catalyst formulations with similar or even superior reactivity to that of noble metals can be obtained by co-adjusting the shape and composition of mixed oxides, such as Cu/ceria nanorods for CO oxidation and Ni/ceria nanorods for CO2 hydrogenation. The conclusions derived could provide the design principles of earth-abundant metal oxide catalysts for various real-life environmental and energy applications.

Real-time observation of the effect of oxygen storage materials on Pd-based three-way catalysts under ideal automobile exhaust conditions: an operando study

The dynamic behavior of Pd species and the CeO2 support of 1 wt% Pd/Al2O3 and Pd/CeO2 catalysts during three-way catalysis was examined in real time with operando multi-probe analysis.

Unravelling the role of ceria in improving the stability of Mo2C- based catalysts for the steam reforming of dimethyl ether

Ceria changes the reaction pathway and promotes the activity and stability of Mo₂C in dimethyl ether steam reforming.

CO2 Methanation over Rh/CeO2 Studied with Infrared Modulation Excitation Spectroscopy and Phase Sensitive Detection

Methane is a well-established fuel molecule whose production from CO 2 through methanation garners increasing interest as an energy storage solution. While often produced with Ni based catalysts, other metals are of interest thanks to higher robustness and activity-selectivity numbers. The Rh/CeO 2 catalyst has shown appreciable properties for CO 2 methanation and its structural dynamics has been studied in situ. However, the reaction pathway is unknown. Here, we present infrared modulation excitation spectroscopy measurements with phase sensitive detection of a Rh/CeO 2 catalyst adsorbate composition during H 2 pulsing (0–2 vol.%) to a constant CO 2 (0.5 vol.%) feed. Various carbonyl (CO) and carbonate (b-CO 3 /p-CO 3 ) ad-species clearly respond to the hydrogen stimulus, making them potential reaction intermediates. The different CO ad-species are likely intermediates for product CO and CH 4 but their individual contributions to the respective formations are not unambiguously ascertained. As for the carbonate dynamics, it might be linked to the reduction/oxidation of the CeO 2 surface upon H 2 pulsing. Formate (HCOO) ad-species are clearly visible but appear to be, if not spectators, linked to slow side reactions possibly also affected by CeO 2 redox processes.

Recent Advances on the Rational Design of Non-Precious Metal Oxide Catalysts Exemplified by CuOx/CeO2 Binary System: Implications of Size, Shape and Electronic Effects on Intrinsic Reactivity and Metal-Support Interactions

Catalysis is an indispensable part of our society, massively involved in numerous energy and environmental applications. Although, noble metals (NMs)-based catalysts are routinely employed in catalysis, their limited resources and high cost hinder the widespread practical application. In this regard, the development of NMs-free metal oxides (MOs) with improved catalytic activity, selectivity and durability is currently one of the main research pillars in the area of heterogeneous catalysis. The present review, involving our recent efforts in the field, aims to provide the latest advances—mainly in the last 10 years—on the rational design of MOs, i.e., the general optimization framework followed to fine-tune non-precious metal oxide sites and their surrounding environment by means of appropriate synthetic and promotional/modification routes, exemplified by CuOx/CeO2 binary system. The fine-tuning of size, shape and electronic/chemical state (e.g., through advanced synthetic routes, special pretreatment protocols, alkali promotion, chemical/structural modification by reduced graphene oxide (rGO)) can exert a profound influence not only to the reactivity of metal sites in its own right, but also to metal-support interfacial activity, offering highly active and stable materials for real-life energy and environmental applications. The main implications of size-, shape- and electronic/chemical-adjustment on the catalytic performance of CuOx/CeO2 binary system during some of the most relevant applications in heterogeneous catalysis, such as CO oxidation, N2O decomposition, preferential oxidation of CO (CO-PROX), water gas shift reaction (WGSR), and CO2 hydrogenation to value-added products, are thoroughly discussed. It is clearly revealed that the rational design and tailoring of NMs-free metal oxides can lead to extremely active composites, with comparable or even superior reactivity than that of NMs-based catalysts. The obtained conclusions could provide rationales and design principles towards the development of cost-effective, highly active NMs-free MOs, paving also the way for the decrease of noble metals content in NMs-based catalysts.

Effects of alumina morphology on dry reforming of methane over Ni/Al2O3 catalysts

Ni-based catalysts supported on alumina with different morphologies exhibited different properties for the dry reforming of methane due to their specific lattice planes, 3D structures, and surface functional properties.

CeO2(111) electronic reducibility tuned by ultra-small supported bimetallic Pt-Cu clusters

Controlling Ce4+ to Ce3+ electronic reducibility in a rare-earth binary oxide such as CeO2 has enormous applications in heterogeneous catalysis, where a profound understanding of reactivity and selectivity at the atomic level is yet to be reached. Thus, in this work we report an extensive DFT-based Basin Hopping global optimization study to find the most stable bimetallic Pt-Cu clusters supported on the CeO2(111) oxide surface, involving up to 5 atoms in size for all compositions. Our PBE+U global optimization calculations indicate a preference for Pt-Cu clusters to adopt 2D planar geometries parallel to the oxide surface, due to the formation of strong metal bonds to oxygen surface sites and charge transfer effects. The calculated adsorption energy values (Eads) for both mono- and bimetallic systems are of the order of 1.79 up to 4.07 eV, implying a strong metal cluster interaction with the oxide surface. Our calculations indicate that at such sub-nanometer sizes, the number of Ce4+ surface atoms reduced to Ce3+ cations is mediated by the amount of Cu atoms within the cluster, reaching a maximum of three Ce3+ for a supported Cu5 cluster. Our computational results have critical implications on the continuous understanding of the strong metal-support interactions over reducible oxides such as CeO2, as well as the advancement of frontier research areas such as heterogeneous single-atom catalysts (SAC) and single-cluster catalysts (SCC).