Interface-confined precise processing of Ag nanowire into AgPd-nanoparticle-sealed AgAu nanotroughs for boosting ethanol electrooxidation

The functions of nanomaterials are closely linked with their fine structures and compositions. Precisely processing nanoparticles into morphology- and composition-varied nanostructures can a cutting-edge technology for producing complex nanostructures. Herein, we develop an interface-confined precise processing strategy towards toluene/water-interfacial Ag nanowires. Interfacial Ag nanowires are transformed into AgPd-nanoparticle-sealed AgAu nanotroughs with abundant AgPd/AgAu hetero-junctions (i.e., AgPdAu hetero-junction nanostructures). By adjusting the reaction conditions, composition-varied AgPdAu hetero-junction nanostructures can be obtained. The formation of AgPdAu hetero-junction nanostructures can be attributed to interface-confined precise etching towards Ag nanowires separately from the two subphases of the water and the toluene. Composition-optimized Ag13Pd67Au20 hetero-junction nanostructure shows satisfactory catalytic performance towards ethanol electrooxidation: ∼4 and 2 times in electrochemical-activity-surface-area-normalized activities; ∼6 and 5 times in mass-normalized activities higher than commercial Pd/C and Pt/C, respectively. The outstanding catalytic capability of Ag13Pd67Au20 may be attributed to optimized composition, porous nanostructures as well as abundant AgPd/AgAu hetero-junctions. This work demonstrates the feasibility of precisely processing interfacial nanoparticles, opening the way for creating morphology-well-defined composition-varied complex nanostructures.

Rapid synthesis of Palladium-Platinum-Nickel ultrathin porous nanosheets with high catalytic performance for alcohol electrooxidation

Bimetallic two-dimensional (2D) nanomaterials are widely used in electrocatalysis owing to their unique physicochemical properties, while trimetallic 2D materials of porous structures with large surface area are rarely reported. In this paper, a one-pot hydrothermal synthesis of ternary ultra-thin PdPtNi nanosheets is developed. By adjusting the volume ratio of the mixed solvents, PdPtNi with porous nanosheets (PNSs) and ultrathin nanosheets (UNSs) was prepared. The growth mechanism of PNSs was investigated through a series of control experiments. Notably, thanks to the high atom utilization efficiency and fast electron transfer, the PdPtNi PNSs have remarkable activity of methanol oxidation reaction (MOR) and ethanol oxidation reaction (EOR). The mass activities of the well-tuned PdPtNi PNSs for MOR and EOR were 6.21 A mg-1 and 5.12 A mg-1, respectively, much higher than those of commercial Pt/C and Pd/C. In addition, after durability test, the PdPtNi PNSs exhibited desirable stability with the highest retained current density. Therefore, this work provides a significant guidance for designing and synthesizing a new 2D material with excellent catalytic performance toward direct fuel cells applications.

ZIF-67-derived CoP/NC effectively supported Pt nanoparticles for methanol oxidation reaction

Metal-support interaction plays an important role in the catalysis reaction, and an effective support is highly desired in the hybrid catalyst construction. Herein, we demonstrated an effective catalyst system by coupling Pt nanoparticles over the ZIF-67-derived CoP/NC support for methanol oxidation reaction (MOR) in acidic and alkaline solutions. The results indicated that the Pt-CoP/NC catalyst showed high catalytic activity and stability for MOR owing to the oxophilic properties of CoP and the strong metal-support interaction, as well supported by the electrochemical measurements and the spectroscopic analysis, which far exceeded that of the Pt-Co/NC and commercial Pt/C catalysts. Specifically, the forward peak current density of the Pt-CoP/NC catalyst was 74.2 mA cm^-2 for MOR in an acidic electrolyte, which was 2.2 times higher than that of a commercial Pt/C catalyst. Further, in an alkaline electrolyte, the Pt-CoP/NC catalyst showed the highest forward peak current density of 118.6 mA cm^-2, which was 4.5 times higher than that of a commercial Pt/C catalyst. High catalytic kinetics and stability for MOR were also carefully discussed. Moreover, the Pt-CoP/NC catalyst exhibited excellent anti-poisoning ability in comparison to the Pt-Co/NC and commercial Pt/C catalysts with the help of the CO-stripping technique. The current work would be instructive for high-performance catalyst system construction based on the ZIF-67-derived CoP/NC support.

Accurately manipulating hierarchical flower-like Fe2P@CoP@nitrogen-doped carbon spheres as an efficient carrier material of Pt-based catalyst

Fabrication of hierarchical porous catalysts with a large specific surface area and tunable architecture provides an effective strategy to promote the catalytic performance of Pt-based catalysts. Herein, we design and construct hierarchical flower-like Fe₂P@CoP@nitrogen-doped carbon (Fe₂P@CoP@NDC) through a facile method, and synthesize Pt/Fe₂P@CoP@NDC porous spheres via acid pickling and depositing of Pt NPs. The morphology of Fe₂P@CoP@NDC is precisely manipulated by controlling the synthesis conditions, including the reaction time and the addition of a protective agent, and the protective growth mechanism of the hierarchical flower-like Fe₂P@CoP@NDC spheres is mentioned. Significantly, the Pt/Fe₂P@CoP@NDC catalyst exhibits 3.29 and 2.36 times higher mass activity and specific activity than those of commercial Pt/C for methanol oxidation, respectively. Furthermore, its residual mass activity after 1000 cycles is 5.77 times as much as that of the commercial Pt/C catalyst in acidic electrolytes. Based on exploration of the reaction kinetics of the Pt/Fe₂P@CoP@NDC catalyst, the excellent catalytic activity and durability are attributed to the unique porous structure with relatively open area and enlarged specific surface area, which can promote fast electron transport and charge transfer, resulting in quick reaction kinetics. Moreover, metal phosphides can effectively accelerate the oxidative removal of intermediates, accordingly improving the catalytic activity. Therefore, the Pt/Fe₂P@CoP@NDC material with these compositional and structural features is expected to be a promising electrochemical catalyst.

Enhanced oxygen reduction and methanol oxidation reaction over self-assembled Pt-M (M = Co, Ni) nanoflowers

Herein, we introduce a facile approach to synthesize a unique class of Pt-M (M = Ni, Co) catalysts with a nanoflower structure for boosting both oxygen reduction reaction (ORR) and methanol oxidation reaction (MOR). By controlling the surface-active agents, we modified the functional groups surrounding the Pt atoms, tuned the alloying of Pt and the transition metals Ni and Co, and prepared two different kinds of nanodendrites. Their successful synthesis depends on the selection and amount of surfactants (hexadecyltrimethylammonium bromide (CTAB), Polyvinylpyrrolidone (PVP)). Besides, by controlling reaction time, we also explored the forming procedures for Pt-Co globularia nanodendrite (Pt-Co GND) and Pt-Ni petalody nanodendrite (Pt-Ni PND). Our investigation highlights the importance of complex nanoarchitecture, which enables surface and interface modification to achieve excellent catalytic performance in fuel cell electrocatalysis. The characterization of the as-prepared catalysts reveals a high electrochemical surface area and mass activity (2041 mAmg_Pt^-1and 950 mAmg_Pt^-1 for Pt-Co GND and Pt-Ni PND, respectively, for ORR). Furthermore, Pt-Co GND showed a high MOR activity, with a mass activity value recorded at 1615 mAmg_Pt^-1 which is far superior to that for Pt/C. Moreover, both catalysts retain high activity after accelerated durability tests (ADTs). The electron transfer number was calculated by performing the rotating ring-disk electrode (RRDE) measurements. Due to abundant active sites of Pt, both Pt-Co GND and Pt-Ni PND exhibit a 4e^- pathway for ORR with electron transfer number of >3.95.

Atomically dispersed Ru in Pt3Sn intermetallic alloy as an efficient methanol oxidation electrocatalyst

We successfully fabricate a novel concave nanostructure that is composed of atomically dispersed Ru atoms in Pt₃Sn nanoconcaves (Ru-Pt₃Sn NCs), which shows enhanced performance in methanol electroxidation compared to commercial Pt/C. This could be ascribed to the stable intermetallic structure and active surface structure, as well as the synergy among Pt, Sn and Ru.

Novel synthesis of a NiMoP phosphide catalyst via carbothermal reduction for dry reforming of methane

NiMoP-Glu with small particle size and an appropriate carbon content showed higher catalytic activity and stability than NiMoP-H2.

Investigation on the key factors of MoP catalysts prepared by a carbothermal reduction method for dry reforming of methane

MoP-Glu with an appropriate surface carbon content and particle size showed a much higher catalytic performance than MoP-HMT and MoP-PFR.

Core-shell structured PtRu nanoparticles@FeP promoter with an efficient nanointerface for alcohol fuel electrooxidation

In this study, a bottleneck was overcome for direct alcohol fuel cells using state-of-the-art PtRu catalysts for alcohol fuel oxidation. Herein, a core-shell structured PtRu catalyst system based on the emerging promoter FeP was developed that showed excellent catalytic performance for the oxidation of alcohol fuels. The surface spectrometric analysis and morphology observation confirmed the formation of a nanointerface of the PtRu shell and FeP core hybrid catalyst (PtRu@FeP), and efficient ligand effects and electronic effects were found to result from the noble metal active sites and adjacent promoter in the core-shell structure. The facile formation of oxygen-containing species and the strong electronic effects could activate the Pt active sites, leading to high catalytic performance. High anti-CO poisoning ability was found for this catalyst system when compared with the case of the benchmark commercial PtRu/C catalyst (110 mV less and 60 mV less as evaluated by the peak and onset potentials for CO oxidation, respectively). The PtRu@FeP catalysts also exhibited much higher catalytic activity and stability when compared with commercial and home-made PtRu/C catalysts; specifically, the peak current density of the PtRu@FeP 1 : 1 catalyst was about 2 and 3 times higher than those of the commercial PtRu/C catalyst and home-made PtRu/C for the oxidation of the alcohol fuels methanol and ethanol; moreover, high catalytic efficiency, improved by 2 times, was found, as expressed by the specific activity. Excellent catalytic stability as evaluated by 1000 cycles of cyclic voltammetry measurements was also demonstrated for the PtRu@FeP catalysts. The high catalytic performance could be attributed to the intimate nanointerface contact of the core-shell structured PtRu shell over the FeP core via a bi-functional catalytic mechanism and electronic effects based on the ligand effect in this catalyst system. The current study is a significant step to increase the PtRu catalytic performance via nanointerface construction by a core-shell structure on a novel promoter for direct alcohol fuel cells.

Transition Metal Phosphides for the Catalytic Hydrodeoxygenation of Waste Oils into Green Diesel

Recently, catalysts based on transition metal phosphides (TMPs) have attracted increasing interest for their use in hydrodeoxygenation (HDO) processes destined to synthesize biofuels (green or renewable diesel) from waste vegetable oils and fats (known as hydrotreated vegetable oils (HVO)), or from bio-oils. This fossil-free diesel product is produced completely from renewable raw materials with exceptional quality. These efficient HDO catalysts present electronic properties similar to noble metals, are cost-efficient, and are more stable and resistant to the presence of water than other classical catalytic formulations used for hydrotreatment reactions based on transition metal sulfides, but they do not require the continuous supply of a sulfide source. TMPs develop a bifunctional character (metallic and acidic) and present tunable catalytic properties related to the metal type, phosphorous-metal ratio, support nature, texture properties, and so on. Here, the recent progress in TMP-based catalysts for HDO of waste oils is reviewed. First, the use of TMPs in catalysis is addressed; then, the general aspects of green diesel (from bio-oils or from waste vegetable oils and fats) production by HDO of nonedible oil compounds are presented; and, finally, we attempt to describe the main advances in the development of catalysts based on TMPs for HDO, with an emphasis on the influence of the nature of active phases and effects of phosphorous, promoters, and preparation methods on reactivity.

Construction of a hollow porous carbon spheres@CoP/nitrogen-doped carbon supported platinum catalyst for high performance methanol oxidation

A Pt–HPCS@CoP/NC catalyst with excellent catalytic activity, CO-tolerance and durability was synthesized for the methanol oxidation reaction.

Broadening the sunlight response region with carbon dot sensitized TiO2 as a support for a Pt catalyst in the methanol oxidation reaction

Carbon dots with upconversion properties harness unused visible light and act as sensitizers for a TiO₂ supported Pt catalyst in MOR.