Optimized Phase and Crystallinity of Cr2(NCN)3 Dominating Electrochemical Lithium Storage Performance

Cr2(NCN)3 is a potentially high-capacity and fast-charge Li-ion anode owing to its abundant and broad tunnels. However, high intrinsic chemical instability severely restricts its capacity output and electrochemical reversibility. Herein we report an effective crystalline engineering method for optimizing its phase and crystallinity. Systematic studies reveal the relevancy between electrochemical performance and crystalline structure; an optimal Cr2(NCN)3 with high phase purity and uniform crystallinity exhibits a high reversible capacity of 590 mAh g-1 and a stable cycling performance of 478 mAh g-1 after 500 cycles. In-operando heating XRD reveals its high thermodynamical stability over 600 °C, and in-operando electrochemical XRD proves its electrochemical Li storage mechanism, consisting of the primary Li-ion intercalation and subsequent conversion reactions. This study introduces a facile and low-cost method for fabricating high-purity Cr2(NCN)3, and it also confirms that the Li storage of Cr2(NCN)3 can be further improved by tuning its phase and crystallinity.

Nano-sized aggregate Ti3C2-TiO2 supported on the surface of Ag2NCN as a Z-scheme catalyst with enhanced visible light photocatalytic performance

Exposing the photocatalyst's highly active facets and hybridizing the photocatalyst with suitable cocatalysts in the proper spot have been recognized as strong methods for high-performance photocatalysts. Herein, Ag2NCN/TiO2-Ti3C2 composites were synthesized by applying simple calcination and physically weak interaction deposition processes to obtain an excellent photocatalyst for Rhodamine B (Rh B) degradation when exposed to visible light. The findings from the experiments reveal that the Ag2NCN/TiO2-Ti3C2400 composite exhibited an outstanding photocatalytic rate in 80 min, with the highest Rh B degradation rate (k = 0.03889 min-1), which was 16 times higher than that of pure Ag2NCN (k = 0.00235 min-1) and 2.2 times higher than that of TiO2-Ti3C2400 (k = 0.01761 min-1). The results from the following factors: (i) the powerful interfacial contact created by the in situ formation of TiO2, and the superior electrical conductivity of Ti3C2 that makes carrier separation possible; (ii) TiO2 with electron-rich (101) facets are deposited on the surface of Ag2NCN, significantly reducing charge carrier recombination by trapping photoelectrons; (iii) a Z-type heterojunction is constructed between nanosize aggregate Ti3C2-TiO2 and Ag2NCN with non-metal Ti3C2 as the solid medium, improving the transfer and separation of photogenerated charges and inhibiting the recombination of electrons and holes. Additionally, the redox ability of the composite photocatalyst is enhanced. Furthermore, the analyses of active species showed that photogenerated superoxide radicals and holes were the principal active agents inside the photodegradation of Rh B. Moreover, the composite exhibited outstanding photo-stability.

Ag2NCN anchored on Ti3C2Tx MXene as a Schottky heterojunction: enhanced visible light photocatalytic efficiency of rhodamine B degradation

The quick charge recombination of light-generated electrons and holes severely restricts the photocatalytic applications of single semiconductors. Here, a straightforward electrostatically driven self-assembly technique was used to construct an Ag₂NCN/Ti₃C₂T_x Schottky heterojunction, which was then used to degrade Rhodamine B (RhB) in the illumination of visible light. The findings from the experiments revealed that as a cocatalyst, Ti₃C₂T_x significantly suppresses the recombination rate and broadens visible absorptivity to improve Ag₂NCN photocatalytic efficiency. The optimized Ag₂NCN/Ti₃C₂T_x (AT2) composite exhibited an outstanding photocatalytic rate in 96 min, with the highest RhB degradation rate (k = 0.029 min^-1), which was around fifteen times that of pure Ag₂NCN (k = 0.002 min^-1). Furthermore, the trapping-agent experiment showed photogenerated superoxide radicals and holes were the principal active agents inside the photodegradation of RhB. Compared with Ag-based semiconductors, the composite exhibited outstanding photostability, highlighting its excellent potential for application in visible-light photocatalysis.

Efficient degradation of tetracycline in wide pH range using MgNCN/MgO nanocomposites as novel H2O2 activator

Currently existing Fenton-like catalysts were limited in wastewater treatment owing to their potential transition-metal poisoning, narrow applicable pH range and high dependence on external energy excitation. In this work, the MgNCN/MgO nanocomposites were firstly synthesized by a facile one-pot calcination of melamine and basic magnesium carbonate, and used as novel H₂O₂ activator for antibiotic removal. It was found that the MgNCN/MgO composite calcined at 550°C with the mass ratio of melamine to basic magnesium carbonate at 2:1, exhibited an excellent catalytic ability to tetracycline (TC) degradation in a wide pH range of 4-10 without any external energy input. More than 90% of TC (100 mL, 50 mg/L) could be degraded within 30 min by 10 mg of the nanocomposite in the presence of 0.2 mL of 30 wt% H₂O₂. Based on the experimental results, it was concluded that the Mg-N coordination between MgNCN and MgO in MgNCN/MgO nanocomposites activated H₂O₂ to produce primary singlet oxygen (¹O₂) and minor hydroxyl radicals (·OH), responding for TC degradation. In addition, the degradation pathways of TC were deduced by determining the generated intermediates during the degradation process. This work provided a novel idea for designing transition-metal-free catalysts for nonradical activation of H₂O₂ in the absence of external energy excitation.

Nanorod bundle-like silver cyanamide nanocrystals for the high-efficiency photocatalytic degradation of tetracycline

Silver cyanamide (Ag₂NCN) is a type of functional semiconductor material with a visible-light response. Ag₂NCN nanocrystals with nanorod bundle-like (RB) or straw bundle-like (SB) assemblies were successfully prepared, and it was found that the as-prepared Ag₂NCN nanorod bundle (RB) samples had a narrower bandgap of 2.16 eV, which was lower than those reported. As a result, RB samples demonstrated a higher photocatalytic activity towards tetracycline (TC) degradation. The analyses of active species confirmed that both the photo-generated holes and ˙O₂ ^- radicals of the RB sample played significant roles during the process of photocatalytic degradation of TC, and the holes were the main active species. These results indicated that effective charge separation could be achieved by adjusting the morphologies of Ag₂NCN nanocrystals. This study provides a new approach to prepare Ag₂NCN nanocrystals with a narrower bandgap and strong visible-light response towards antibiotic degradation.

Controllable Conversion of CdNCN Nanoparticles into Various Chalcogenide Nanostructures for Photo-driven Applications

Semiconductor nanocrystals of tunable shell/core configurations have great potential in photo-driven applications such as photoluminescence and photocatalysis, but few strategies realize a controllable synthesis with respect to both the size of the core and the shell with high crystallinity. Here, a new synthetic method based on cadmium cyanamide (CdNCN) nanoparticle anion exchange reactions was developed to access solid or hollow CdSe nanocrystals with tunable size and CdNCN@CdS heterostructures with modulated shell/core thickness. The gradual shift and narrow width of photoluminescence features demonstrate the high crystallinity and monodispersity of the resulting CdSe nanocrystals. In the CdNCN@CdS heterostructures, synergistic effects of the photocarrier separation is observed between the CdS shell and CdNCN core, which leads to great improvement in photocatalysis with optimized shell/core ratio.

Synthesis of LaFeO3/Ag2CO3 Nanocomposites for Photocatalytic Degradation of Rhodamine B and p-Chlorophenol under Natural Sunlight

Novel LaFeO3/Ag2CO3 nanocomposites are synthesized by co-precipitation method for photocatalytic degradation of Rhodamine B (RhB) and p-chlorophenol under visible light irradiation. Heterostructures between LaFeO3 and Ag2CO3 semiconductors are formed during the synthesis of these nanocomposites. Among the nanocomposites prepared with different ratios of LaFeO3 and Ag2CO3, 1% LaFeO3/Ag2CO3 shows the highest photocatalytic activity for the degradation of RhB. Maximum electron-hole pair decoupling efficiency is observed in 1% LaFeO3/Ag2CO3, which causes the greater activity of the heterostructure. Degradation efficiency of 99.5% for RhB and 59% for p-chlorophenol has been obtained under natural sunlight within 45 min. Interestingly, the stability of Ag2CO3 is improved dramatically after making nanocomposite, and no decomposition of the catalyst was observed even after several photocatalytic cycles. Reactive oxygen species scavenging experiments with p-benzoquinone, isopropyl alcohol, and ammonium oxalate suggest that a major degradation process is caused by holes. Degradation of RhB into small organic moieties is detected using LC-MS technique. Further, the efficient mineralization of the degradation products occurs during the catalytic process.

Enhanced photocatalytic hydrogen evolution over a heterojunction composed of silver cyanamide and graphitic carbon nitride

A semiconductor heterojunction composed of silver cyanamide (Ag₂NCN) and graphitic carbon nitride (g-C₃N₄) exhibited excellent photocatalytic activity for hydrogen evolution under simulated sunlight irradiation.