Mechanochemical Synthesis of PdO2 Nanoparticles Immobilized over Silica Gel for Catalytic Suzuki-Miyaura Cross-Coupling Reactions Leading to the C-3 Modification of 1H-Indazole with Phenylboronic Acids

The C-3 modification of 1H-indazole has produced active pharmaceuticals for the treatment of cancer and HIV. But, so far, this transformation has seemed less available, due to the lack of efficient C-C bond formation at the less reactive C-3 position. In this work, a series of silica gel-supported PdO2 nanoparticles of 25-66 nm size were prepared by ball milling silica gel with divalent palladium precursors, and then employed as catalysts for the Suzuki-Miyaura cross-coupling of 1H-indazole derivative with phenylboronic acid. All the synthesized catalysts showed much higher cross-coupling yields than their palladium precursors, and could also be reused three times without losing high activity and selectivity in a toluene/water/ethanol mixed solvent. Although the palladium precursors showed an order of activity of PdCl2(dppf, 1,1'-bis(diphenylphosphino)ferrocene) > PdCl2(dtbpf, 1,1'-bis(di-tert-butylphosphino)ferrocene) > Pd(OAc, acetate)2, the synthesized catalysts showed an order of C1 (from Pd(OAc)2) > C3 (from PdCl2(dtbpf)) > C2 (from PdCl2(dppf)), which conformed to the orders of BET (Brunauer-Emmett-Teller) surface areas and acidities of these catalysts. Notably, the most inexpensive Pd(OAc)2 can be used as a palladium precursor for the synthesis of the best catalyst through simple ball milling. This work provides a highly active and inexpensive series of catalysts for C-3 modification of 1H-indazole, which are significant for the large-scale production of 1H-indazole-based pharmaceuticals.

Ethanol Upgrading to n-Butanol Using Transition-Metal-Incorporated Poly(triazine)imide Frameworks

The upgrading of ethanol to n-butanol was performed using a molecular catalyst integrated into a carbon nitride support, one of the first examples of a supported molecular catalyst performing the Guerbet process. Initial studies using crystalline poly(triazine)imide (PTI) with lithium or transition-metal cations imbedded in the support together with a base as the catalyst system did not produce any significant amounts of n-butanol. However, when using the catalyst material formed by treatment of PTI-LiCl with [(Cp*)IrCl₂]₂ (Cp* = pentamethylcyclopentadienyl) along with sodium hydroxide, a 59% selectivity for butanol (13% yield) was obtained at 145 °C. This PTI-(Cp*)Ir material exhibited distinct UV-vis absorption features and powder X-ray diffractions which differ from those of the parent PTI-LiCl and [(Cp*)IrCl₂]₂. The PTI-(Cp*)Ir material was found to have a metal loading of 27% iridium per empirical unit of the framework. Along with the formation of n-butanol from the Guerbet reaction, the presence of higher chain alcohols was also observed.

A Fusion of Molecular Imprinting Technology and Siloxane Chemistry: A Way to Advanced Hybrid Nanomaterials

Molecular imprinting technology is a well-known strategy to synthesize materials with a predetermined specificity. For fifty years, the "classical" approach assumed the creation of "memory sites" in the organic polymer matrix by a template molecule that interacts with the functional monomer prior to the polymerization and template removal. However, the phenomenon of a material's "memory" provided by the "footprint" of the chemical entity was first observed on silica-based materials nearly a century ago. Through the years, molecular imprinting technology has attracted the attention of many scientists. Different forms of molecularly imprinted materials, even on the nanoscale, were elaborated, predominantly using organic polymers to induce the "memory". This field has expanded quickly in recent years, providing versatile tools for the separation or detection of numerous chemical compounds or even macromolecules. In this review, we would like to emphasize the role of the molecular imprinting process in the formation of highly specific siloxane-based nanomaterials. The distinct chemistry of siloxanes provides an opportunity for the facile functionalization of the surfaces of nanomaterials, enabling us to introduce additional properties and providing a way for vast applications such as detectors or separators. It also allows for catalyzing chemical reactions providing microreactors to facilitate organic synthesis. Finally, it determines the properties of siloxanes such as biocompatibility, which opens the way to applications in drug delivery and nanomedicine. Thus, a brief outlook on the chemistry of siloxanes prior to the discussion of the current state of the art of siloxane-based imprinted nanomaterials will be provided. Those aspects will be presented in the context of practical applications in various areas of chemistry and medicine. Finally, a brief outlook of future perspectives for the field will be pointed out.

A visible-light-responsive molecularly imprinted polyurethane for specific detection of dibenzothiophene in gasoline

Dibenzothiophene and its derivatives in gasoline and diesel would release sulfur oxides during combustion, and this is harmful to human health and the environment. This paper reports a method based on a visible-light-responsive molecularly imprinted polyurethane (VMIPU) to monitor trace dibenzothiophene in gasoline. The VMIPU was prepared by a polyaddition reaction using N,N-bis-(2-hydroxyethyl)-4-phenylazoaniline as the functional monomer, dibenzothiophene as the template molecule, diphenylmethane diisocyanate as the crosslinker and castor oil as the chain extender. The VMIPU showed good visible-light-response and specific adsorption for dibenzothiophene. The trans → cis photoisomerization rate constant of azobenzene chromophores in the VMIPU shows a linear relationship with the dibenzothiophene concentration in the range of 0-20 μmol L^-1. This was used to estimate trace dibenzothiophene in spiked gasoline with recoveries of 95.7-101.0% and relative standard deviations of 7.0-12.7%.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Preparation and performance analysis of monodisperse glycidyl methacrylate modified restricted access media-imprinted materials

Using monodisperse poly(glycidyl methacrylate-co-ethylene glycol dimethacrylate) as the matrix, and pefloxacin template molecules, a novel restricted-access medium molecularly imprinted polymers with Bovine serum albumin crosslinked on its surface was prepared through reversible addition fragmentation chain-transfer polymerization. Then, the obtained material was employed in dispersive solid-phase extraction to analyze the fluoroquinolones in untreated egg samples by HPLC-UV detection. Adsorption performance revealed a good binding amount (40.72 mg/g), fast binding kinetics (25 min), satisfactory selectivity and good ability to eliminate matrix interference. The Reusability experiments indicated the materials has good reusable performance after repeated. Under the optimised conditions, restricted access media-molecularly imprinted polymers-dispersive solid phase extraction was combined with HPLC-UV to enrich fluoroquinolones in untreated eggs, good limit of detection (1.31-3.15 μg/L) and high recovery (89.5%-96.8%) were obtained. The results showed that the prepared restricted-access material is promising for direct detection of antibiotics in complex samples. This article is protected by copyright. All rights reserved.

Minimalization of Metallic Pd Formation in Suzuki Reaction with a Solid-State Organometallic Catalyst

Suzuki reaction usually uses palladium (Pd) complexes to accommodate a wide range of substrates. In pursuing greener synthesis, immobilization of Pd complexes with various support materials has shown promising potential. Although this approach can give stable conversion, initially immobilized Pd ions are largely reduced to Pd⁰ aggregates and turned essentially into supported nanoparticles after use, which departs from its original intention of complex immobilization and thus hampers its activity. Herein, we immobilize noble metal ions into a spherical thiolated organosilica. This new type of catalysts can catalyze Suzuki reaction homogeneously via leaching out Pd ions and shuttling them back after the reaction. The excellent reusability attained can be attributed to minimalization of forming metallic palladium. Thus, the developed catalysts can be viewed as a two-way device to release and to restore metal ions for homogeneous catalysis.

Hybrid mesoporous organosilicas with molecularly imprinted cavities: towards extended exposure of active amino groups in the framework wall

Towards extended exposure of active sites in the framework of ordered mesoporous materials via molecularly imprinted cavities.

Chemoselective epoxidation of cholesterol derivatives on a surface-designed molecularly imprinted Ru–porphyrin catalyst

High chemoselectivity for the C₅C₆ epoxidation of cholesterol derivatives without protecting other oxidizable functional groups was achieved on a newly designed molecularly imprinted Ru–porphyrin catalyst using a SiO₂-support.