Remarkably fast and reusable photocatalysis by UV annealed Cu2O-SnO2 p-n heterojunction

Powdered micro- or nano-particles photocatalyst has separation and recovery challenges, which may create a second pollution to environment and harmful to animals. To address those issues, SnO2, Cu2O and Cu2O-SnO2 p-n heterojunction thin films are formed on glass substrates using efficient co-sputtering method that is commonly employed for large-area high-definition display panel. Using first-order kinetics, 100 °C ultraviolet (UV) annealed Cu2O-SnO2 p-n heterojunction shows the superb fast degradation rate constant of 0.21 and 0.16 min-1 for methylene blue (MB) and methyl orange (MO) organic dyes, respectively, as photogenerated electron-hole pairs is increased. Record best degradation rate constants of 0.19 and 0.11 min-1 for respective MB and MO are still achieved even after four repeated cycles. The 100 °C UV annealed Cu2O-SnO2 film catalyst displays greater degradation efficiency in both dyes, reaching 100% degradation at room temperature after 30 and 35 min of illumination for MB and MO respectively. The scavenger experiments show that hydroxyl (·OH) and superoxide radicals (·O2-) are the major active species in the degradation of dye. The 100 °C UV annealed Cu2O-SnO2 film catalyst showed stability as well as reusability towards the dye degradation. As a result, the present work delivers an effective way to enhance the photocatalytic performance and also an easy recovery of the catalyst, which can be explored for various emerging pollutants.

Hybrid Device Architecture Using Plasmonic Nanoparticles, Graphene Quantum Dots, and Titanium Dioxide for UV Photodetectors

In this work, a nanoscale device architecture is demonstrated for a UV photodetector application on sapphire (0001), incorporating the plasmonic hybrid nanoparticles (HNPs), graphene quantum dots (GQDs), and titanium oxide (TiO₂) for the first time. The hybrid GQDs/TiO₂/HNPs photodetector exhibits the photocurrent of 1.58 × 10^-5 A under the 1.64 mW/mm² of 275 nm illumination at 10 V, which is around two order increase from the bare TiO₂ device. The proposed architecture demonstrates a low dark current of ∼1 × 10^-10 A at 10 V and thus the device demonstrates an excellent photo to dark current ratio along with the improved rise and fall time on the order of several hundred millisecond. The enhanced performance of device architecture is attributed to the efficient utilization of localized surface plasmon resonance (LSPR) induced hot carriers as well as scattered photons from the plasmonic HNPs that are fully encapsulated by the photoactive TiO₂ layers. Furthermore, the addition of GQDs on the TiO₂ can offer an additional photon absorption pathway. The proposed hybrid architecture of GQDs/TiO₂/HNPs demonstrates the integration of the photon absorption and carrier transfer properties of plasmonic HNPs, GQDs, and TiO₂ for an enhanced ultraviolet (UV) photoresponse. The photocurrent enhancement mechanisms of the hybrid device architecture are thoroughly investigated based on the finite-difference time domain (FDTD) simulation along with the energy band analysis. This work demonstrates a great potential of the hybrid device architecture for high-performance UV photodetectors.

Controllable Hydrothermal Synthesis and Photocatalytic Performance of Bi2MoO6 Nano/Microstructures

Bi2MoO6 with a tunable morphology was synthesized by a facile hydrothermal route using different surfactants, including nanosheet-assembled microspheres, smooth microspheres, nanoparticle aggregates and nanoparticles. The morphology, crystal structure and photocatalytic activity of as-obtained Bi2MoO6 were characterized by scanning electron microscopes (SEM), X-ray diffraction (XRD), photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) and UV–Vis spectrophotometer. Bi2MoO6 flower-like microspheres using cetyl-trimethyl-ammonium bromide (BET) as the surfactant exhibited much better photocatalytic activity than Bi2MoO6 with the other morphologies, with a degradation efficiency of 98.4%. It can be summarized that the photocatalytic activity of Bi2MoO6 samples depends on their morphology and composition.

Unique 1D/3D K2Ti6O13/TiO2 micro-nano heteroarchitectures: controlled hydrothermal crystal growth and enhanced photocatalytic performance for water purification

Unique 1D/3D K₂Ti₆O₁₃/TiO₂ micro-nano heteroarchitectures with enhanced photocatalytic performance for pollutant degradation were successfully fabricated through a controlled hydrothermal route.

Synthesis of Flower-Like AgI/BiOCOOH p-n Heterojunctions With Enhanced Visible-Light Photocatalytic Performance for the Removal of Toxic Pollutants

In this study, flower-like AgI/BiOCOOH heterojunctions were constructed through a two-step procedure involving the solvothermal synthesis of BiOCOOH microflowers followed by AgI modification using a precipitation method. These novel photocatalysts were systematically examined by XRD, UV–vis DRS, SEM, TEM, EDS, and PL spectroscopy techniques. The AgI/BiOCOOH heterojunction were studied as a decent photocatalyst for the removal of the industrial dye (rhodamine B, and methyl blue) and antibiotic (tetracycline) under visible light. The AgI/BiOCOOH heterojunctions are much more active than bare BiOCOOH, and AgI, which could be ascribed to the improved separation of charge carriers, resulting from the formation of p-n heterojunction between two constituents. The holes (h⁺) and superoxide radical (•O2-) were detected as the main active species responsible for the pollutant degradation. The results showed that a highly efficient visible-light-driven photocatalytic system was developed for the decomposition of toxic pollutants.