Synthesis, Spectral, Redox, and Sensing Studies of β-Dicyanovinyl-Appended Corroles and Their Metal Complexes

A new family of β-dicyanovinyl (DCV)-appended corroles represented as MTPC(MN) (where M = 3H, Cu, Ag, and Co(PPh₃) and MN = malononitrile and TPC = 5,10,15-triphenylcorrole) were synthesized starting from the free base mono β-formyl corrole, H₃TPC(CHO), and characterized along with their respective MTPC(CHO) and MTPC complexes as to their spectroscopic and electrochemical properties in nonaqueous media. Comparisons between the two series of corroles demonstrate a pronounced substituent effect of the β-DCV group on the physicochemical properties making the MTPC(MN) derivatives substantially easier to reduce and more difficult to oxidize than the formyl or unsubstituted corroles. In addition, the colorimetric and spectral detection of 11 different anions (X) in the form of tetrabutylammonium salts (TBAX, X = PF₆^-, OAc^-, H₂PO₄^-, CN^-, HSO₄^-, NO₃^-, ClO₄^-, F^-, Cl^-, Br^-, and I^-) were also investigated in nonaqueous media. Of the investigated anions, only CN^- was found to induce changes in the UV-vis and ¹H NMR spectra of the β-DCV metallocorroles. This data revealed that CuTPC(MN) and AgTPC(MN) act as chemodosimeters for selective cyanide ion detection via a nucleophilic attack at the vinylic carbon of the DCV substituent, while (PPh₃)CoTPC(MN) acts as a chemosensor for cyanide ion sensing via axial coordination to the cobalt metal center. A low-limit detection of cyanide ions was observed at 1.69 ppm for CuTPC(MN) and 1.17 ppm for AgTPC(MN) in toluene.

Selective Detection of Picric Acid and Pyrosulfate Ion by Nickel Complexes Offering a Hydrogen-Bonding-Based Cavity

This work describes the synthesis and characterization of three mononuclear nickel complexes supported with amide-based pincer ligands. All three complexes presented an H-bonding-based cavity due to the migration of amidic protons to the appended heterocyclic rings that formed H-bonds with the metal-ligated solvent molecule(s). These complexes functioned as the nanomolar chemosensors for the detection of picric acid and pyrosulfate ion as inferred by the detailed absorption and emission spectral studies while further supported with FTIR, NMR, and mass spectra of the isolated products. We also illustrate a few practical detection methods for the sensing of picric acid in the solution state as the naked-eye colorimetric methods and in the solid state by employing polystyrene films.

Nickel(II) monobenzoporphyrins and chlorins: synthesis, electrochemistry and anion sensing properties

A series of nickel(II) monobenzochlorins (MBCs) and monobenzoporphyrins (MBPs) containing β-appended or meso,β-fused indanedione (IND) or malononitrile (MN) groups were synthesized and characterized for their physicochemical, electrochemical and anion sensing properties. Each investigated compound contained four meso-phenyl rings and a single β,β'-fused 4,5-di(methoxycarbonyl)benzene ring, with the chlorins represented as NiMBC(Y)₂(R)₄ and the porphyrins as NiMBP(Y^F)₂, where Y is an indanedione (IND) or malononitrile (MN) group, R = H or Br and Y^F is a meso,β-fused IND or MN substituent. One of the investigated compounds, NiMBP(IND)₂, was structurally characterized and shown to possess a ruffled macrocyclic conformation. The monobenzochlorins, NiMBC(IND)₂, NiMBC(IND)₂Br₄ and NiMBC(MN)₂, reversibly respond to basic anions such as CN^-, F^-, OAc^- and H₂PO₄^- through a visible color change assigned to the deprotonation of the vicinal proton on the appended IND or MN substituents. The malononitrile-fused Ni^II monobenzoporphyrin, NiMBP(MN)₂, exhibited a selective but irreversible visual detection of cyanide ions (LOD = 2.23 ppm). This reaction afforded a tri-fused π-extended monobenzoporphyrin product represented as NiMBP(VCN)₂ (where VCN = meso,β-fused vinyl cyanide) in non-aqueous media and proceeded via anion induced electron transfer (AIET). The in situ generated π-extended porphyrin was also isolated and characterized as to its physicochemical and electrochemical properties and found to possess a narrow electrochemical HOMO-LUMO gap of 1.46 V along with a near-IR (NIR) absorption band located at 861 nm.

Recent Advancements for the Recognization of Nitroaromatic Explosives Using Calixarene Based Fluorescent Probes

In this era, explosives are easily available compared to the early days. Thus, more effective detection of explosives has become the main concern of homeland security. In the past decades, a large number of sensing materials have been developed for the detection of explosives in solid, vapor, and solution states through fluorescence methods. In recent years, great efforts have been devoted to developing new fluorescent materials with various sensing mechanisms for detecting explosives in order to achieve super-sensitivity, ultra-selectivity, as well as fast response time. Modified calixarenes have high potentials to detect nitroaromatic compounds (NACs) due to their favorable structural properties. It summarizes the detection of NACs by the modified calixarene system formed by the complex. Various methodologies responsible for complex formation and binding mechanisms (PET, FRET, EE, etc.) are the centerpiece of this review. Finally, conclusions and future outlook are presented and discussed.

Fused Nickel(II) Porphyrins-Sensing of Toxic Anions and Selected Metal Ions Through Supramolecular Interactions

Ni(II) porphyrins having fused -NH group were synthesized and characterized by various spectroscopic techniques. The fused porphyrins 1 and 2 were used to detect species of opposite polarity. 1 was used to sense toxic anions viz. cyanide and fluoride ions whereas 2 was used for detecting some selective metal ions including toxic mercury(II) ions. 1 is having acidic -NH proton, which detects anions via hydrogen bonding interactions followed by anion-induced deprotonation. On the other hand, 2 senses the metal species via weak charge transfer interactions from oxygen atom of the formyl group to the added metal ions. The limit of detection was calculated in case of 1 as 2.13 and 3.15 ppm for cyanide and fluoride ions, respectively. Similarly, the detection limit was found to be 0.930, 2.231, and 0.718 ppm for Cu(II), Fe(III), and Hg(II) ions, respectively, for probe 2. The probes were recovered and reused for several cycles.

Porphyrins as Colorimetric and Photometric Biosensors in Modern Bioanalytical Systems

Advances in porphyrin chemistry have provided novel materials and exciting technologies for bioanalysis such as colorimetric sensor array (CSA), photo-electrochemical (PEC) biosensing, and nanocomposites as peroxidase mimetics for glucose detection. This review highlights selected recent advances in the construction of supramolecular assemblies based on the porphyrin macrocycle that provide recognition of various biologically important entities through the unique porphyrin properties associated with colorimetry, spectrophotometry, and photo-electrochemistry.

Interpol review of detection and characterization of explosives and explosives residues 2016-2019

This review paper covers the forensic-relevant literature for the analysis and detection of explosives and explosives residues from 2016-2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/Resources/Documents#Publications.

Dy(III)-Based Metal-Organic Framework as a Fluorescent Probe for Highly Selective Detection of Picric Acid in Aqueous Medium

A dysprosium metal-organic framework, {[Dy(μ₂-FcDCA)_1.5(MeOH)(H₂O)]·0.5H₂O}_n (1), where FcDCA = 1,1'-ferrocene dicarboxylic acid, was prepared by slow-diffusion technique at room temperature. The crystal structure analysis of 1 by single-crystal X-ray diffraction reveals different binding modes of FcDCA linkers coordinated with Dy(III) metal ions, which forms continuous porous two-dimensional (2D) infinite framework. The resulting 2D layers are linked by π···π interactions to build three-dimensional (3D) supramolecular framework. Observably, this thermally stable 3D architecture was topologically simplified as a three-connected uninodal net with fes topology. Furthermore, the practical applicability of 1 was investigated as a fluorescence sensor for the sensitive detection of picric acid in aqueous medium with an impressive detection limit of 0.71 μM with quenching constant (K_SV) quantified to be 8.55 × 10⁴ M^-1. The distinguished selectivity in the presence of other nitroaromatics suggests the possible incorporation of 1 in real-world futuristic diagnostic kits. Additionally, the electrochemical behavior of 1 exhibits reversible in nature attributed to the ferrocene/ferrocenium cation.

Knock-on synthesis of tritopic calix[4]pyrrole host for enhanced anion interactions

Interactions of anionic guests with a tritopic peripherally functionalized conjugated calix[4]pyrrole host (1) prepared using a regioselective synthetic method is reported. The regioselectivity of synthesis relies on selective N-alkylation of the calix[4]pyrrole caused by peripheral substitution of one pyrrole group with subsequent N-alkylation at the opposing pyrrole group termed by us 'knock-on' regioselectivity. The resulting host molecule exhibits anion interactions with common chloride and nitrate anions enhanced by an order of magnitude over the parent conjugated calix[4]pyrrole. Combined analysis of ¹H NMR and UV-vis spectroscopic titration data enabled an evaluation of binding strengths of anions with the host K_A in a binding model where the salt dissociation process is also incorporated in the form of its dissociation constant K_d. Anions could be classified as two types based on their interactions with 1: Type A anions (chloride, nitrate, perchlorate, hydrogensulphate) associate as 1 : 1 complexes through hydrogen bonding while interactions involving Type B anions (acetate, fluoride, dihydrogenphosphate) are complicated by host deprotonation and/or countercation association. Hosts based on rim-functionalized calix[4]pyrroles such as 1 represent a promising new family of chromophores for estimation of biologically relevant anions or other species.

Size-Selective Detection of Picric Acid by Fluorescent Palladium Macrocycles

This work presents the synthesis and characterization of two palladium-based fluorescent macrocycles offering hydrogen-bonding cavities of contrasting dimensions. Both palladium macrocycles function as chemosensors for the detection of nitroaromatics, whereas the larger macrocycle not only illustrates nanomolar detection of picric acid but also transports its significant amount from an aqueous to an organic phase.