Selective adsorption and separation of methylene blue by facily preparable xanthan gum/amantadine composites

In this work, xanthan gum-based composites were successfully graft-modified by amantadine (XG-Fe³⁺/AM) with higher adsorption capacity and selectivity on recycling cationic dye (methylene blue, MB) from aqueous solution. The adsorption equilibrium of MB could be achieved approximately within 5 min when the initial concentration was 100 mg/L, and the maximum adsorption capacity was up to 565 mg/g. After 5 desorption-regeneration cycles, the removal rate of XG-Fe³⁺/AM for MB could still be as high as 95 % with slight decrement. Additionally, the effects of pH, contact time, temperature and initial dye concentration on the adsorption performance of MB were systematically examined. Furthermore, the adsorbent was characterized by FT-IR, BET and XPS analysis. In mixed anionic and cationic dyes, the adsorption selectivity of XG-Fe³⁺/AM on MB in the mixture of MB and methyl orange (MO) reached up to 99.69 %. Molecular dynamics simulation revealed that the trend of adsorption energy for dyes was in good agreement of the experimental order of adsorption capacities and molecular sizes among seven anionic and cationic dyes based on molecular matching effect and electrostatic interaction. Therefore, XG-Fe³⁺/AM is an eco-friendly, facile-synthesis and high-selectivity adsorbent, which remove cationic dyes in multi-component systems through electrostatic interaction and molecular matching effect.

A bifunctionalised Pb-based MOF for iodine capture and dye removal

A 2-dimensional Pb(II) metal-organic framework, [Pb(bdc)_0.5(py-Phen)NO₃]_n (SM-3), was synthesized under solvothermal conditions using a mixed ligand approach. SM-3 was assembled using dinuclear SBUs [Pb₂(COO)₂]^2-, an oxygen donor H₂bdc = 1,4-benzene dicarboxylic acid, and nitrogen donor py-Phen = pyrazino[2,3-f][1,10]-phenanthroline linkers. SM-3 was characterized by elemental analysis, FT-IR, powder-X-ray diffraction, thermal gravimetric analysis, SEM, EDS, TEM, and single-crystal X-ray diffraction techniques. Crystallographic studies confirmed that SM-3 displays a 2D layered structure with unique anagostic (Pb⋯H) interactions. Interestingly, the presence of abundant π-electron-rich rings embellished with free -N donor sites in the framework makes SM-3 an excellent adsorbent that exhibits adsorption performance for iodine and dyes. The experimental results show that SM-3 reversibly adsorbs radioactive iodine in the solution and vapor phases and exhibits selective adsorption performance for hazardous cationic dyes, namely, methylene blue (MB) and rhodamine-B (Rh-B), from aqueous solution. Moreover, the possible mechanism of iodine and dye adsorption was also discussed in detail. Thus, this work is remarkable for coordination chemists to engineer layered MOFs for adsorption purposes and expands their potential characteristics by converting them into 2D MOF nanosheets to further enhance the adsorption of hazardous pollutants for environment protection.

Connectivity Replication of Neutral Eu3+- and Tb3+-Based Metal-Organic Frameworks (MOFs) from Anionic Cd2+-Based MOF Crystallites

Neutral three-dimensional Eu³⁺- and Tb³⁺-based metal-organic frameworks (MOFs) with 4-fold interpenetration can be produced by seeding with anionic Cd²⁺-based MOF crystallites of identical connectivity. In the absence of these crystallites, two-dimensional networks are formed.

Adsorptive removal of dyes from wastewater using a metal-organic framework: A review

Water pollution from synthetic dyes is a growing environmental concern because many dyes have carcinogenic effects on humans and aquatic life. Adsorption is a widely used technology for the separation and removal of dyes from wastewater. However, the dye removal process using conventional adsorbents is not sufficiently efficient for industrial wastewater. Metal-organic frameworks (MOFs) addresses these drawbacks. MOF showed excellent dye removal and degradation capacity owing to its multifunctionality, water-stability, large surface area, tunable pore size and recyclability. Magnetic MOFs retained excellent performance up to several consecutive cycles. Modified MOFs performed as Fenton-like catalysis process which generated abundant reactive radicals that degraded complex organic dyes into simple and less toxic forms which were further adsorbed onto the MOF. This review systematically compiles in-depth studies on the adsorptive removal of dyes from wastewater, MOF adsorption mechanisms, major influencing factors, to adsorption efficiency of MOFs. While all MOFs adsorb dyes through electrostatic attraction, the type of MOF, presence of functional groups, ligands, and pH significantly control the adsorption mechanism. Before developing an MOF, optimization and upgradation of factors and interaction between available adsorption site and adsorbate is needed. Finally, the prospects and new frontiers of MOFs in sustainable water treatment is discussed.

Stimuli-Responsive Zinc (II) Coordination Polymers: A Novel Platform for Supramolecular Chromic Smart Tools

The unique role of the zinc (II) cation prompted us to cut a cross-section of the large and complex topic of the stimuli-responsive coordination polymers (CPs). Due to its flexible coordination environment and geometries, easiness of coordination-decoordination equilibria, "optically innocent" ability to "clip" the ligands in emissive architectures, non-toxicity and sustainability, the zinc (II) cation is a good candidate for building supramolecular smart tools. The review summarizes the recent achievements of zinc-based CPs as stimuli-responsive materials able to provide a chromic response. An overview of the past five years has been organised, encompassing 1, 2 and 3D responsive zinc-based CPs; specifically zinc-based metallorganic frameworks and zinc-based nanosized polymeric probes. The most relevant examples were collected following a consequential and progressive approach, referring to the structure-responsiveness relationship, the sensing mechanisms, the analytes and/or parameters detected. Finally, applications of highly bioengineered Zn-CPs for advanced imaging technique have been discussed.

Enhanced Water Purification Performance of Ionic Liquid Impregnated Metal-Organic Framework: Dye Removal by [BMIM][PF6]/MIL-53(Al) Composite

We incorporated a water-stable ionic liquid (IL), 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM][PF₆], into a water-stable metal-organic framework (MOF), MIL-53(Al), to generate the [BMIM][PF₆]/MIL-53(Al) composite. This composite was examined for water purification by studying its capacity for methylene blue (MB) and methyl orange (MO) removal from aqueous solutions having either single dye or a mixture of both. Data illustrated that the removal efficiency and the maximum adsorption capacity of MIL-53(Al) were increased several times upon [BMIM][PF₆] incorporation. For instance, within 1 min, 10 mg of pristine MIL-53(Al) adsorbed 23.3% MB from 10 mg/L of MB solution, while [BMIM][PF₆]/MIL-53(Al) composite was adsorbed 82.3% MB in an identical solution. In the case of MO, 10 mg of pristine MIL-53(Al) achieved 27.8 and 53.6% MO removal from 10 mg/L of MO solution, while [BMIM][PF₆]/MIL-53(Al) composite removed 61.4 and 99.2% within 5 min and 3 h, respectively. Moreover, upon [BMIM][PF₆] incorporation, the maximum MB and MO adsorption capacities of the pristine MOF were increased from 84.5 to 44 mg/g to 204.9 to 60 mg/g, respectively. The adsorption of dyes in pristine MIL-53(Al) and [BMIM][PF₆]/MIL-53(Al) followed a pseudo-second-order kinetic model and a Langmuir isotherm model. In a mixture of both dyes, the IL/MOF composite showed a doubled MB selectivity after the IL incorporation. The composite was successfully regenerated at least two times after its use in water purification to remove MB, MO, and their mixtures. Infrared (IR) spectra indicated that the MB/MO adsorption occurs on [BMIM][PF₆]/MIL-53(Al) by electrostatic interactions, hydrogen bonding, and π-π interactions. These results showed that [BMIM][PF₆]/MIL-53(Al) composite is a highly promising material for efficient water purification.

Zn-MOFs based luminescent sensors for selective and highly sensitive detection of Fe3+ and tetracycline antibiotic

Either reduced or excessive metal ions level in biological systems might induce serious metabolic diseases, and the abuse of antibiotics has seriously affected the environment. Despite the significant progress in the development of fluorescence probes over the past decade, the ability to sensitively and selectively detect these metal ions and antibiotics remains a pressing problem. Herein, we demonstrated some effective fluorescence probes for sensing metal ions and antibiotics, six novel and stable Zn(II) metal-organic frameworks (Zn-MOFs), namely [Zn₃(L)₂(1,4-bimb)₃]_n (1), [Zn₃(L)₂(4,4'-bbibp)₂(H₂O)₂]_n·2(CH₃CN) (2), [Zn(HL)(4,4'-bidpe)]_n (3), [Zn(HL)(4,4'-bibp)]_n (4), [Zn(HL)(3,5'-bip)]_n (5) and [Zn(HL)(1,3'-bit)]_n (6) (flexible H₃L = 5-(2-carboxylphenoxy)isophthalic acid, semi-flexible 1,4-bimb = 1,4-bis(imidazol-l-ylmethyl) benzene, rigid 4,4'-bbibp = 4,4'-bis(benzoimidazo-1-ly)biphenyl, semi-flexible 4,4'-bidpe = 4,4'-bis(imidazolyl)diphenyl ether, rigid 4,4'-bibp = 4,4'-bis(imidazolyl)biphenyl, rigid 3,5'-bip = bis(1-imidazoly)pyridine and rigid 1,3-bit = 1,3-bis(l-imidazoly)toluene) have been successfully synthesized via solvothermal conditions and further characterized by IR spectra, elemental analysis, powder X-ray diffraction (PXRD), single-crystal X-ray diffraction, and thermogravimetric (TG) analysis. These Zn MOFs have exhibited diversely architectural frameworks via the assistant N-donor ligands: 1, 2, 5 and 6 show unprecedented topological networks, 1 affords a 3-nodal (3, 4, 4)-connect 2-fold interpenetrating topology structure with the Point Schläfli symbol of (5·6·7·9²·10)₂(5·6·7)₂(5·7³·8²), 2 shows a 3-nodal (3, 4, 6)-c topology with (4·8²)₂(4²·8¹¹·10·12)(8⁶), 5 and 6 display 3-nodal (2, 2, 4)-c topology with (2·4⁴·6)(2)(4). 3 and 4 show 4-connected sql topology with (4⁴·6²). As expected, Zn MOFs 1-6 not only revealed a highly sensitive and selective fluorescence quenching effect on Fe³⁺ ions in aqueous solution, but also toughed the interference of a myriad of other metal ions. It is noteworthy that they could also be used as luminescent sensors for detection of tetracycline antibiotic.

A dual-sensitized luminescent europium(iii) complex as a photoluminescent probe for selectively detecting Fe3

A new luminescent Eu^III complex, namely [Eu₂(BTFA)₄(OMe)₂(dpq)₂] (1), in which BTFA = 3-benzoyl-1,1,1-trifluoroacetone and dpq = dipyrido [3,2-d:2',3'-f] quinoxaline, has been designed and synthesized by employing two different ligands as sensitizers. Crystal structure analysis reveals that complex 1 is composed of dinuclear Eu^III units crystallized in the monoclinic P1̄ space group. Notably, 1 exhibits high thermal stability up to 270 °C and excellent water stability. The photoluminescence property of the complex is investigated. Further studies show 1 can recognize Fe³⁺ ions with high selectivity from mixed metal ions in aqueous solution through the luminescence quenching phenomenon. Furthermore, the recyclability and stability of 1 after sensing experiments are observed to be adequate. By virtue of the superior stability, detection efficiency, applicability and reusability, the as-prepared Eu^III complex can be a promising fluorescent material for practical sensing.

A robust 3D In–MOF with an imidazole acid ligand as a fluorescent sensor for sensitive and selective detection of Fe3+ ions

A stable In(iii)-MOF with a versatile 5-(1H-imidazol-1-yl)isophthalic acid ligand can be used as a fluorescent sensor for Fe³⁺ detection.

A water-stable terbium metal–organic framework with functionalized ligands for the detection of Fe3+ and Cr2O72− ions in water and picric acid in seawater

A novel Tb-MOF-A was fabricated by functionalized ligands and Tb³⁺, which displays high fluorescence, water stability up to 21 days and rapid, cyclic, simultaneous detection of Fe³⁺, Cr₂O₇²⁻ ions in water and picric acid in seawater.

Constructing an ultra-adsorbent based on the porous organic molecules of noria for the highly efficient adsorption of cationic dyes

A novel Noria-POP-1 material has been successfully synthesized by the simple polymerization of the porous organic molecules of noria and aryl diamines. Noria-POP-1 displayed excellent adsorption capacity for cationic dyes from water with selective removal ability. The adsorption experiments show that Noria-POP-1 displays a remarkable capability to selectively adsorb and separate methylene blue with an adsorption capacity of 2434 mg g⁻¹, which is the highest value obtained so far for porous organic polymers.

A novel Noria-POP-1 material has been successfully synthesized by simply polymerization of Noria and aryl diamines. Noria-POP-1 displays a remarkable capability to selectively absorb and separate methylene blue, which is 2434 mg g⁻¹.

Metal organic frameworks decorated with free carboxylic acid groups: topology, metal capture and dye adsorption properties

In this report, metal organic frameworks (MOFs) are designed and tuned for structural variations in order to induce metal capture which in turn directs dye adsorption properties. The three MOFs, Cu-MOF-2COOH, Ni-MOF-COOH and Cd-MOF, are synthesized by employing 1,3,5-benzenetricarboxylic acid (H3-BTC) as the main ligand and 4,4'-dipyridyl (bipy) as the spacer. The MOFs have been characterized using various spectral techniques and single crystal X-Ray studies. A topological analysis using TOPOS Pro reveals that the MOFs possess varying topologies i.e.hcb, hxl, sql and 2C1. Cu-MOF-2COOH and Ni-MOF-COOH contain two and three uncoordinated carboxylic acid groups, respectively, and in Cd-MOF, all three -COOH groups are utilized in bonding. The dye adsorption properties of the MOFs with free carboxylate group(s) were checked and we found that both MOFs are unable to adsorb any of the dyes significantly. The free carboxylate group(s) in the MOFs inspire us to elaborate their metal capturing properties. In different solvents we checked the metal capturing properties of Cu-MOF-2COOH and Ni-MOF-COOH with different metal salts. Surprisingly, both MOFs show better metal capturing properties towards the hard and highly polarizing Fe3+ ion in aqueous medium. Theoretical studies show that the free carboxylate(s) are involved in binding with metals. The post synthetically modified materials (Fe@Cu-MOF-2COOH and Fe@Ni-MOF-COOH) were further checked for their dye adsorption properties and both the doped MOFs show better adsorption properties towards the MB and MO. Furthermore, three kinetic models were employed to understand the reaction mechanism of adsorption and the pseudo second order kinetic model fits the best in both cases. The uncoordinated carboxylate groups in the channels act as post synthetic modification sites for metal capture and the post synthetically modified material thus formed attracts organic dyes following the HSAB concept. The strong interaction existing between the hard Fe3+ ion and hard donors of the dyes is responsible for the enhanced adsorption.

Assembly of four new cobalt coordination polymers modulated by N-coligands: sensitive and selective sensing of nitroaromatics, Fe3+and Cr2O72−in water

Four new Co-CPs (1to4) have been obtained with the modulation of N-coligands.2and3can serve as multi-responsive sensors for rapid and sensitive detection of nitroaromatics, Fe³⁺and Cr₂O₇²⁻in water.

Three-in-one is really better: exploring the sensing and adsorption properties in a newly designed metal-organic system incorporating a copper(ii) ion

A 2-D copper(ii)-based coordination polymer, [Cu(SCN)(hmp)]_n CP (1), was crystallized via the slow evaporation method after the reaction of CuSO₄·5H₂O, 2-pyridinemethanol (hmpH), sodium thiocyanate and sodium hydroxide in water for functional applications. CP (1) was characterized via elemental analysis, FTIR, PXRD, magnetic, EPR, crystallographic and TGA studies. The crystal structure and EPR data confirmed a square pyramidal geometry around the Cu(ii) ions. The topological analysis revealed that CP 1 has a {6^{^}3} point symbol with a [6.6.6] extended point symbol and 3-c net, uninodal net having hcb and Shubnikov hexagonal plane net/(6,3) type of uncommon topology. The magnetic studies suggested the strong antiferromagnetic nature of CP (1). The fluorescence sensing property of CP (1) was investigated with different nitro aromatic compounds and hazardous metal ions. CP (1) demonstrated high selectivity and sensitivity towards nitrobenzene, even in the presence of other competitive nitro aromatics. In addition, CP (1) showed excellent selectivity and sensitivity toward Fe³⁺ over other metal ions. The possible detection mechanisms were proposed employing UV-visible and fluorescence spectroscopy and DFT calculations. CP (1) also showed excellent recyclability towards both analytes, and its initial intensity was almost regained after several washings. Moreover, CP (1) acted as an excellent adsorbent material for natural dyes with different charges and sizes, i.e., methylene blue (MB), methyl orange (MO) and Rhodamine-B. Furthermore, CP (1) was utilized repeatedly for the effective adsorption of MB from wastewater without significant loss in its adsorption capacity. Hence, the present CP (1) was designed to relate coordination chemistry with various functional applications of interest.

Two triphenylamine-based luminescent metal–organic frameworks as a dual-functional sensor for the detection of nitroaromatic compounds and ofloxacin antibiotic

Two solvent-induced luminescent MOFs have been synthesized and MOF1 can be employed as a dual-functional fluorescence sensor for nitroaromatics and antibiotics.

Structural diversity of six metal–organic frameworks from a rigid bisimidazole ligand and their adsorption of organic dyes

Six entangled coordination polymers from a bisimidazole ligand and versatile carboxylate acids have been synthesized and structurally characterized. Their adsorption behaviors to organic dyes have also been evaluated.

Temperature-dependent 3D structures of lanthanide coordination polymers based on dicarboxylate mixed ligands

Four families of fourteen three-dimensional (3D) lanthanide coordination polymers (CPs) with dicarboxylate mixed ligands have been synthesized hydrothermally at different temperatures.

Porous organic polymers based on melamine and 5,5′-bis(bromomethyl)-2,2′-bipyridine: functionalization with lanthanide ions for chemical sensing and highly efficient adsorption of methyl orange

Microporous POP-1 displays extremely fast adsorption of MO dyes. Moreover, Eu³⁺@POP-1 for chemical sensing can be easily prepared by a postsynthetic method.