Principles of Self-Repairing Ability of Tripodal Ligand-Stabilized Hybrid Cobalt Hydroxide Nanosheets for Alkaline Water Electrolysis

Self-repairing catalysts are promising new materials for achieving long lifetime of alkaline water electrolyzers powered by renewable energy. Catalytic nanoparticles dispersed in an electrolyte were deposited on the anode to repair a catalyst layer by electrolysis. A hybrid cobalt hydroxide nanosheet modified with tris(hydroxymethyl)aminomethane on the surface (Co-ns) was used as a catalyst. Assuming a pseudo-first-order process, the rate constant of an electrochemical deposition was linearly correlated with the electrode potential during electrolysis. Thus, it is expected that the repair of the catalyst is automatically controlled by changes in the oxygen evolution reaction (OER) overpotential. The essential step of the electrochemical deposition was the anodic oxidation of Co2+ to Co3+ . Surface modification of Co-ns protects Co2+ against the autooxidation of Co2+ caused by the dissolved oxygen. The redox properties and organic modification of Co-ns make them well-suited for the self-repairing of anode catalysts.

Hydrolysis of Methoxylated Nickel Hydroxide Leading to Single-Layer Ni(OH)2 Nanosheets

Various methods for the preparation of inorganic nanosheets have been established and they have contributed to the substantial development of the research on diverse two-dimensional materials. Covalent surface modification of layered metal hydroxides with alkoxy groups is known to effectively weaken the interactions between layers, although the modified ligands are irreversibly immobilized. This study proposes the use of methanol as a removable surface modifier forming monodentate alkoxy bonds to prepare nickel hydroxide nanosheets through hydrolysis. Methoxylated layered nickel hydroxide, consisting of randomly stacked nano-sized nickel hydroxide sheets (10-20 nm in size) having Ni-OCH₃ groups on its surface, was synthesized in a powder form through the precipitation reaction of a nickel salt in methanol at room temperature. After dispersing the aggregated methoxylated nickel hydroxide in water, single-layer nickel hydroxide nanosheets with a thickness of 1.2 nm and a lateral size of 460 nm at maximum, which is larger than the size of original methoxylated nickel hydroxide were found in the suspension. The time-course experiments during hydrolysis suggested that two-dimensional crystal growth of exfoliated nickel hydroxide sheets proceeded, resulting in the formation of the nanosheets. Moreover, single-layer and nano-sized cobalt hydroxide was prepared through a similar manner. This work demonstrates that two-dimensional alkoxides consisting of polymeric M-O-M bonds are useful precursors for the design of metal-hydroxide-based nanomaterials.

Biocompatible and functional inorganic magnesium ceramic particles for biomedical applications

Magnesium ceramics hold promise for numerous biological applications. This review covers the synthesis of magnesium ceramic particles with specific morphologies and potential modification techniques. Magnesium ceramic particles possess multiple characteristics directly applicable to human biology; they are anti-inflammatory, antibacterial, antiviral, and offer anti-cancer effects. Based on these advantages, magnesium hydroxide nanoparticles have been extensively utilized across biomedical fields. In a vascular stent, the incorporation of magnesium ceramic nanoparticles enhances re-endothelialization. Additionally, tissue regeneration for bone, cartilage, and kidney can be promoted by magnesium ceramics. This review enables researchers to identify the optimum synthetic conditions to prepare magnesium ceramics with specific morphologies and sizes and select the appropriate modification protocols. It is also intended to elucidate the desirable physicochemical properties and biological benefits of magnesium ceramics.

Correlations of acidity-basicity of solvent treated layered double hydroxides/oxides and their CO2 capture performance

The basicity and acidity of solvent-treated layered double hydroxide (ST-LDHs) and their layered double oxides (ST-LDOs) have been fully studied using Hammett titration, in situ FTIR, CO₂-TPD and NH₃-TPD. Five solvents (ethanol, acetone, isopropanol, ethyl acetate and 1-hexanol) were selected to treat [Mg_0.72Al_0.28(OH)₂](CO₃)_0.14 (Mg_2.5Al-CO₃ LDH) and compared with traditional LDH co-precipitated from water. The Brønsted basicity strength of the ST-LDHs and ST-LDOs increased but was accompanied by a decrease in basic site density. In addition, the Lewis acidity of ST-LDOs also changes significantly, with medium strength Lewis acid sites dissapearing after solvent treatment. We found that the CO₂ capture capacity of solvent treated LDOs is 50% higher than that of traditional co-precipitated LDO sample. The ethanol treated LDO exhibited the highest CO₂ uptake of 1.01 mmol g^-1. The observed CO₂ capture performance of the ST-LDOs correlates linearly with the ratio of total acid sites to total basic sites.

Selective Covalent Modification of Layered Double Hydroxide Nanoparticles with Tripodal Ligands on Outer and Interlayer Surfaces

Layered double hydroxides (LDHs) have occupied an important place in the fields of catalysts, electrocatalysts, and fillers, and their applicability can be greatly enhanced by interlayer organic modifications. In contrast to general organic modification based on noncovalent modification using ionic organic species, this study has clarified in situ interlayer covalent modification of LDH nanoparticles (LDHNPs) with the tripodal ligand tris(hydroxymethyl)aminomethane (Tris-NH₂). Interlayer-modified CoAl LDHNPs were obtained by a one-pot hydrothermal treatment of an aqueous solution containing metal salts and Tris-NH₂ at 180 °C for 24 h. Tris-NH₂ was covalently bonded on the interlayer surface of LDHNPs. Interlayer-modified NiAl LDHNPs were also similarly synthesized. Some comparative experiments under different conditions indicate that the important parameters for interlayer modification are the number of bonding sites per a modifier, the electronegativity of a constituent divalent metal element, and the concentration of a modifier; this is because these parameters affect the hydrolytic stability of alkoxy-metal bonds between a modifier and a layer of LDHNPs. The synthesis of interlayer-modified MgAl LDHNPs was achieved by adjusting these parameters. This achievement will enable new potential applications because modification of only the outer surface has been achieved until now. Interlayer-modified LDHNPs possessing CO₃^2- in the interlayer space were delaminated into monolayers under ultrasonication in water. The proposed method provides a rational approach for interlayer modification and facile delamination of LDHNPs.

Precise size control of layered double hydroxide nanoparticles through reconstruction using tripodal ligands

Layered double hydroxide nanoparticles were synthesized via reconstruction, suppressing crystal growth with tripodal ligands.