Photoelectrochemical properties of single-grain hematite films grown by electric-field-assisted liquid phase deposition

This article reports a modification of the conventional liquid phase deposition (C-LPD) method for the single-grain deposition of α-Fe2O3 (hematite) films into an electric-field-assisted liquid phase deposition (EA-LPD).

FeVO4 Nanopolyhedron Photoelectrodes for Stable and Efficient Water Splitting

Crystalline FeVO₄ nanopolyhedron (FVO NPH) photoelectrodes are successfully prepared by using an in situ solid-state transformation from hydrothermal FeOOH films via adding vanadium precursor and following thermal treatments. The FVO NPH photoelectrodes possess uniformly dispersed polyhedral nanocrystals that directly grow on the conductive substrate with tunable film thicknesses. The unique morphology enables an outstanding photo-electrocatalytic performance, and the optimized FVO NPH photoelectrode, which was annealed at 550 °C for 4 h with a film thickness of ∼560 nm, exhibits excellent photocurrent densities of ∼0.47 and ∼0.68 mA cm^-2 at 1.0 and 1.2 V vs. Ag/AgCl, respectively. After decorating CoPi co-catalyst, FVO/CoPi shows a highly efficient water splitting performance with O₂ and H₂ evolution rates of 7.53 and 15.32 μmol cm^-2  h^-1 , respectively, which are ∼1.88 and ∼1.80 times, respectively, of these of the FVO NPH. The proposed photoelectrodes also show excellently chemical and physical stabilities in solar water splitting. This is the first time reported the preparation of well-organized nanostructured FeVO₄ films, which warrants further optimization studies on morphologies and compositions of FeVO₄ -based photoelectrodes.

Visible-Light-Responsive Oxyhalide PbBiO2Cl Photoelectrode: On-Site Flux Synthesis on a Fluorine-Doped Tin Oxide Electrode

The performance of photoelectrodes is hugely affected by the preparation method. Although a flux synthesis is useful to endow semiconductor particles with the desired properties such as high crystallinity, there are only a few reports on its application to photoelectrode fabrication, probably because relatively high temperatures are necessary. In the present study, we introduce a new concept for on-site flux synthesis of semiconductor crystals on a commonly used fluorine-doped tin oxide (FTO) substrate; a seed layer is predeposited and then treated with an appropriate flux containing other required elements at a right temperature lower than the limit temperature of FTO but sufficiently high to transform the seed layer to the target material with the aid of flux. Here, an oxyhalide PbBiO₂Cl, one of the promising semiconductors for achieving visible-light water splitting, is selected as a target material. Combination of a BiOCl seed layer and the NaCl-PbCl₂ flux containing other precursors enables the seed layer to transform into PbBiO₂Cl crystals even at 450 °C. The thickness of the PbBiO₂Cl layer can be controlled by changing the thickness of the BiOCl seed layer for efficient photon-to-current conversion. Owing to a good contact at the semiconductor-substrate interfaces as well as the high quality of PbBiO₂Cl crystals, the flux-synthesized PbBiO₂Cl photoelectrode shows a significantly improved PEC performance compared with those prepared from the particulate PbBiO₂Cl samples via the conventional squeegee method. In addition, the present PbBiO₂Cl photoelectrodes exhibit both anodic and cathodic photoresponses with substantially high current values depending on the applied potentials; the unusual phenomenon is affected by the conditions in flux-assisted synthesis. The present study provides a new and effective way for fabricating efficient photoelectrodes of various semiconductors on various substrates and a possible option to control their morphologies and p/n types for further improvement in performance.