Synthesis and application of a water-soluble phosphorescent iridium complex as turn-on sensing material for human serum albumin

Chemiluminescence and electrochemiluminescence of water-soluble iridium(III) complexes containing a tetraethylene-glycol functionalised triazolylpyridine ligand

BACKGROUND

Iridium(III) complexes, exhibiting high luminescence quantum yields and a wide range of emission colours, are promising alternatives to tris(2,2'-bipyridine)ruthenium(II) for chemiluminescence (CL) and electrochemiluminescence (ECL) detection. This emerging class of reagent, however, is limited by the poor solubility of many iridium(III) complexes in aqueous solution, and lack of understanding of their remarkably variable selectivities towards different analytes.

RESULTS

Seven [Ir(C^N)2(pt-TEG)]+ complexes, exhibiting a wide range of reduction potentials and emission energies, were examined with six model analytes. For CL, cerium(IV) was used as the oxidant. The alkylamine analytes generally produced greater CL and ECL with the more readily oxidised Ir(III) complexes (C^N = piq, bt, ppy), predominantly through the 'direct' pathway requiring oxidation of both metal complex and analyte. Aniline derivatives that did not also contain secondary or tertiary alkylamines elicited CL from the less readily oxidised complexes (C^N = df-ppy-CF3, df-ppy) via energy transfer. The most difficult to oxidise complexes (C^N = df(CF3)-ppy-Me, df(CN)-ppy) gave poor responses due to the limited potential window of the solvent and inefficiency of energy transfer to their high energy excited states. Greater CL and/or ECL intensities were generally obtained for each analyte with at least one Ir(III) complex than with [Ru(bpy)3]2+; superior limits of detection for two analytes were demonstrated.

SIGNIFICANCE

This exploration of CL/ECL in which the properties of luminophore, analyte and oxidant are all varied provides a new understanding of the influence of the metal-complex potentials and excited state energy on the light-producing and quenching pathways, and consequently, their distinct selectivity towards different analytes. These findings will guide the development of water-soluble Ir(III) complexes as CL and ECL reagents.

An ALP-responsive, anionic iridium complex for specific recognition of osteosarcoma cells

Poor cellular permeability greatly hampers the utilization of anionic Ir(III) complexes, though efficiently emissive and remarkably stable, in cell-based diagnosis. To overcome this barrier, we present the development of an alkaline phosphatase (ALP)-responsive, anionic, and aggregation-induced emission (AIE)-active Ir(III) complex (Ir1) for specific recognition of osteosarcoma cells. Containing phosphate moieties, Ir1 exhibits a net -1 charge, enabling charge repulsion from the cell membrane and resulting in low cellular uptake and good biocompatibility in normal osteoblast cells. Upon ALP-mediated hydrolysis of phosphate groups, the resulting dephosphorylated product, Ir2, demonstrates a positive charge and increased lipophilicity, promoting cellular uptake and activating its AIE properties for specific recognition of osteosarcoma cells that express elevated levels of ALP. This study elucidates the role of ALP as an ideal trigger for enhancing the cellular permeability of phosphate ester-containing Ir(III) complexes, thus expanding the potential of anionic Ir(III) complexes for biomedical applications.

Experimental and theoretical studies of pH-responsive iridium(III) complexes of azole and N-heterocyclic carbene ligands

A series of nine luminescent iridium(III) complexes with pH-responsive imidazole and benzimidazole ligands have been prepared and characterized. The first series of complexes were of the form [Ir(ppy)2(N^N)]+ or [Ir(ppy)2(C^N)]+ (where ppy is 2-phenylpyridine and N^N is 2-(2-pyridyl)imidazole or 2-(2-pyridyl)benzimidazole and C^N represents a pyridyl-triazolylidene-based N-heterocyclic carbene ligand). For these complexes, the benzimidazole group was either unsubstituted or substituted with electron-withdrawing (Cl) or electron-donating (Me) groups. The second series of complexes were of the form [Ir(phbim)2(N^N)]+ or [Ir(phbim)2(C^N)]+ (where phbim is 2-phenylbenzimidazole and N^N is either 2,2'-bipyridine or 1,10-phenanthroline and C^N is either a pyridyl-imidazolylidene or pyridyl-triazolylidene N-heterocyclic carbene ligand). UV-visible and photoluminescence pH titration studies showed that changing the protonation state of these complexes results in significant changes in the photoluminescence emission properties. The pKa values of prepared complexes were estimated from the spectroscopic pH titration data and these values show that the nature of the pH-sensitive ligands (either main or ancillary ligands) resulted in a significant capacity to modulate the pKa values for these compounds with values ranging from 5.19-11.22. Theoretical investigations into the nature of the electronic transitions for the different protonation states of compounds were performed and the results were consistent with the experimental results.

Nanoengineering and green chemistry-oriented strategies toward nanocelluloses for protein sensing

As one of the most important functional organic macromolecules of life, proteins not only participate in the cell metabolism and gene regulation, they also earnestly protect the body's immunity system, leading to a powerful biological shield and homeostasis. Advances in nanomaterials are boosting the significant progress in various applications, including the sensing and examination of proteins in trace amount. Nanocellulose-oriented protein sensing is at the forefront of this revolution. The inherent feature of high biocompatibility, low cytotoxicity, high specific area, good durability and marketability endow nanocellulose with great superiority in protein sensing. Here, we highlight the recent progress of protein sensing using nanocellulose as the biosensor in trace amount. Besides, various kinds of construction strategies for nanocelluloses-based biosensors are discussed in detail, to enhance the agility and accuracy of clinical/medical diagnostics. Finally, several challenges in the approbatory identification of new approaches for the marketization of biomedical sensing that need further expedition in the future are highlighted.

pH-Responsive N^C-Cyclometalated Iridium(III) Complexes: Synthesis, Photophysical Properties, Computational Results, and Bioimaging Application

Herein we report four [Ir(N^C)2(L^L)]n+, n = 0,1 complexes (1-4) containing cyclometallated N^C ligand (N^CH = 1-phenyl-2-(4-(pyridin-2-yl)phenyl)-1H-phenanthro[9,10-d]imidazole) and various bidentate L^L ligands (picolinic acid (1), 2,2'-bipyridine (2), [2,2'-bipyridine]-4,4'-dicarboxylic acid (3), and sodium 4,4',4″,4‴-(1,2-phenylenebis(phosphanetriyl))tetrabenzenesulfonate (4). The N^CH ligand precursor and iridium complexes 1-4 were synthesized in good yield and characterized using chemical analysis, ESI mass spectrometry, and NMR spectroscopy. The solid-state structure of 2 was also determined by XRD analysis. The complexes display moderate to strong phosphorescence in the 550-670 nm range with the quantum yields up to 30% and lifetimes of the excited state up to 60 µs in deoxygenated solution. Emission properties of 1-4 and N^CH are strongly pH-dependent to give considerable variations in excitation and emission profiles accompanied by changes in emission efficiency and dynamics of the excited state. Density functional theory (DFT) and time-dependent density functional theory (TD DFT) calculations made it possible to assign the nature of emissive excited states in both deprotonated and protonated forms of these molecules. The complexes 3 and 4 internalize into living CHO-K1 cells, localize in cytoplasmic vesicles, primarily in lysosomes and acidified endosomes, and demonstrate relatively low toxicity, showing more than 80% cells viability up to the concentration of 10 µM after 24 h incubation. Phosphorescence lifetime imaging microscopy (PLIM) experiments in these cells display lifetime distribution, the conversion of which into pH values using calibration curves gives the magnitudes of this parameter compatible with the physiologically relevant interval of the cell compartments pH.

Recent development and application of cyclometalated iridium(III) complexes as chemical and biological probes

Iridium complexes have been widely applied as molecular sensors because of their rich photophysical properties, including large Stokes shifts, long emission lifetimes, environment-sensitive emissions, and high luminescence quantum yields. In this paper, we review the recent development and application of iridium complexes as probes for ions, anions, gaseous species, organic molecules, small biomolecules, biomacromolecules, and subcellular organelles. Our outlook for iridium-based probes is also discussed.

Luminescent Chemosensor Based on Ru(II) Bipyridine Complex for Detection of Sudan I through Inner Filter Effect

Presence of Sudan I in food stuff can be problematic and need to be checked in order to protect our health from possible carcinogen. Therefore, it is essential to detect Sudan I by efficient, rapid and reliable method. In this work, we have designed a Ru(II) polypyridyl complex, [Ru(bpy)₂(CIP)]²⁺ probe for the selective and sensitive detection of Sudan I. Upon addition of Sudan I to the solution of [Ru(bpy)₂(CIP)]²⁺ in ethanol, the luminescence quenched rapidly, and linear concentration range with analyte has been obtained from 0.8 to 100 μM with the limit of detection as low as 0.26 μM (S/N = 3). The effective luminescence quenching was resulted due to the inner filter effect (IFE) between luminophore, [Ru(bpy)₂(CIP)]²⁺ and quencher, Sudan I. Our spectroscopic study was essentially provided sufficient analytical evidences in order to prove occurrence of IFE mechanism. As there were no interferences observed in luminescence measurement from the other substances the present probe has been successfully applied for the detection of Sudan I in commercial chili powder sample, making the probe suitable for practical usage.

Electrochemical Quantification of Glycated and Non-glycated Human Serum Albumin in Synthetic Urine

A polymer-based electrode capable of specific detection of human serum albumin, and its glycated derivatives, is described. The sensor is constructed from a glass microscope slide coated with a synthesized, polythiophene film bearing a protected, iminodiacetic acid motif. The electrode surface is then further elaborated to a functional biosensor through deprotection of the iminodiacetic acid, followed by metal-affinity immobilization of a specific and high-affinity, albumin ligand. Albumin was then quantified in buffer and synthetic urine via electrochemical impedance spectroscopy. Glycated albumin was next bound to a boronic acid-modified, single-cysteine dihydrofolate reductase variant to quantify glycation ratios by square-wave voltammetry. The platform offers high sensitivity, specificity, and reproducibility in an inexpensive arrangement. The detection limits exceed the requirements for intermediate-term glycemic control monitoring in diabetes patients at 5 and 1 nM for albumin and its glycated forms, respectively.

Photofunctions of iridium(iii) complexes in vesicles: long-lived excited states and visible-light sensitization for hydrogen evolution in aqueous solution

Utilization of DPPC vesicles allows water-insoluble photoactive Ir(iii) complexes to be dispersed in bulk aqueous solution.

Rapid and selective luminescent sensing of allergenic gluten by highly phosphorescent switch-on probe

First time the luminescent switch-on probe using novel water-soluble cyclometallated iridium complex (Ir-dc) has been developed for sensitive and selective detection of gluten in the presence of several interfering elements. Linear concentration range of gluten is obtained from 5 to 200 µg/mL with a limit of detection 2.6 µg/mL. The Ir-dc complex responded to the broad pH range which is advantageous for the detection of gluten in various food samples. Additionally, It has been successfully employed for the detection of gluten in commercial food samples of wheat flour and oats with highest recovery values, indicating applicability of Ir-dc for practical usage.