In situ DRIFTS FT-IR and DFT study on Fe-V-W/Ti removal of NOx and VOCs

Nitrogen oxides (NO_X) and volatile organic compounds (VOCs) are generated during the coal-fired power plant's combustion. They can be simultaneously removed in SCR (selective catalytic reduction) region. Herein, the performance of V-W/Ti and Fe-V-W/Ti synthesized by wet impregnation in removing NO_X and VOCs was evaluated. XPS (X-ray photoelectron spectroscopy) result indicated that a redox cycle of Fe²⁺  + V⁵⁺  ⇌ Fe³⁺  + V⁴⁺ could form electron vacancy through electron transfer. Besides, the mechanisms of NH₃-SCR and VOCs catalytic oxidation were explored with in situ DRIFTS experience and DFT calculation. On Fe-V-W/Ti, in situ DRIFTS study found more absorption sites of NH₃, and different intermediates during simultaneously removal process. DFT calculation demonstrated that absorption energy of O₂ was decreased and O = O bond was lengthened with Fe doped. Both V-W/Ti and Fe-V-W/Ti followed the L-H mechanism and shared a common NH₃-SCR pathway: [Formula: see text]. However, the bidentate nitrate and monodentate nitrate were also revealed on Fe-V-W/Ti, which combined with NH₄⁺ and decomposed into N₂ and H₂O, or N₂O and H₂O, respectively. The detected NH₂ species combined with NO on the Fe-V-W/Ti, following the E-R mechanism. As for VOCs, the intermediates of benzene and toluene were revealed by in situ DRIFTS study, and detailed Mars-van Krevelen mechanism was discovered.

Recent advances and perspectives in the resistance of SO2 and H2O of cerium-based catalysts for NOx selective catalytic reduction with ammonia

This review emphasizes the aspects related to cerium-based catalysts at different levels: metal modification, preparation methods, structures, and reaction mechanisms.

Vanadium-bearing steel slag catalysts for the selective catalytic reduction of NOx by NH3

In this paper, denitration catalysts were prepared by different modification methods using vanadium-bearing steel slag as raw material.

MnO2 -Based Materials for Environmental Applications

Manganese dioxide (MnO₂ ) is a promising photo-thermo-electric-responsive semiconductor material for environmental applications, owing to its various favorable properties. However, the unsatisfactory environmental purification efficiency of this material has limited its further applications. Fortunately, in the last few years, significant efforts have been undertaken for improving the environmental purification efficiency of this material and understanding its underlying mechanism. Here, the aim is to summarize the recent experimental and computational research progress in the modification of MnO₂ single species by morphology control, structure construction, facet engineering, and element doping. Moreover, the design and fabrication of MnO₂ -based composites via the construction of homojunctions and MnO₂ /semiconductor/conductor binary/ternary heterojunctions is discussed. Their applications in environmental purification systems, either as an adsorbent material for removing heavy metals, dyes, and microwave (MW) pollution, or as a thermal catalyst, photocatalyst, and electrocatalyst for the degradation of pollutants (water and gas, organic and inorganic) are also highlighted. Finally, the research gaps are summarized and a perspective on the challenges and the direction of future research in nanostructured MnO₂ -based materials in the field of environmental applications is presented. Therefore, basic guidance for rational design and fabrication of high-efficiency MnO₂ -based materials for comprehensive environmental applications is provided.

Characterization of WMnCeTiOx catalysts prepared by different methods for the selective reduction of NO with NH3

WMnCeTiOx(CP) catalysts showed excellent NH3-SCR activity and better SO2 tolerance.

Mechanochemical activation of titanium slag for effective selective catalytic reduction of nitric oxide

Ti-bearing blast furnace slag was usually recycled by acid leaching. For the first time, a catalyst was synthesized from the slag by wet ball-milling. During this process, no waste was produced. When the activated slag was used in selective catalytic reduction of nitric oxide (NO), 80.5 ± 1.2% of NO (990 ppm) was removed at 350 °C. The catalyst steadily removed 91.0 ± 1.3% of NO for 900 min at 400 °C. On the contrary, the slag without activation showed almost no catalytic activity at these temperatures. The enhanced activity was mainly attributed to the following characterizations. After wet ball-milling, specific surface area of the slag was increased from 2.595 to 26.497 m²/g; surface acid sites were amplified by 15 times; Fe/Ti ratio on surface was enhanced from 0.20 to 1.10. At the same time, surface Fe²⁺/Fe³⁺ was regulated from 0.43 to 0.53. The above enhanced properties were attributed to the mechanochemical activation, which dissolved and re-deposited active species on particle surface as well as reinforced the effect between Fe and Ti species. The main result of this work put forward a green method for the direct utilization of industrial waste without generating by-products.

Simultaneous catalytic reduction of SO2 and NO from flue gas using H2S as a reductant at low temperatures

High-efficiency simultaneous removal of NO and SO₂ in flue gas can be realized by catalytic reduction with H₂S on CeO₂–AT catalyst in the low temperature range of 240 to 280 °C.

Significantly enhanced Pb resistance of a Co-modified Mn–Ce–Ox/TiO2 catalyst for low-temperature NH3-SCR of NOx

Co modification can significantly improve the performance for low-temperature NH₃-SCR of NO_x and the Pb resistance of the Mn–Ce–O_x/TiO₂ catalyst.

Novel efficient U–Cu/CSAC catalyst for selective reduction of NO at low temperatures: preparation, characterization, evaluation and mechanism

Highly dispersed Cu⁰ nanoparticles and amorphous Cu₂O supported on coconut shell-based activated carbon showed excellent LTU-SCR activity at low temperatures.