Atomic Strain Wave-Featured LaRuIr Nanocrystals: Achieving Simultaneous Enhancement of Catalytic Activity and Stability toward Acidic Water Splitting

Rare earth microalloying nanocrystals have gotten widespread attention due to their unprecedented performances with customization-defected nanostructures, divided energy bands, and ensembled surface chemistry, regarded as a class of ideal electrocatalysts for oxygen evolution reaction (OER). Herein, a lanthanide microalloying strategy is proposed to fabricate strain wave-featured LaRuIr nanocrystals with oxide skin through a rapid crystal nucleation, using thermally assisted sodium borohydride reduction in aqueous solution at 60 °C. The atomic strain waves with alternating compressive and tensile strains, resulting from La-stabilized edge dislocations in form of Cottrell atmospheres. In 0.5 m H2SO4, the LaRuIr displays an overpotential of 184 mV at 10 mA cm-2, running at a steadily cell voltage for 60 h at 50 mA cm-2, eightfold enhancement of IrO2||Pt/C assemble in PEMWE. The coupled compressive and tensile profiles boost the OER kinetics via faster AEM and LOM pathways. Moreover, the tensile facilitates surface structure stabilization through dynamic refilling of lattice oxygen vacancies by the adsorbed oxyanions on La, Ru, and Ir sites, eventually achieving a long-term stability. This work contributes to developing advanced catalysts with unique strain to realize simultaneous improvement of activity and durability by breaking the so-called seesaw relationship between them during OER for water splitting.

Controlled-Release Electrochemiluminescence Biosensor with Strong Self-On Effect by a Multiple Signal Amplification Strategy for Trace Detection of Prostate-Specific Antigen

The enhancement of sensitivity in biological analysis detection can reduce the probability of false positives of the biosensor. In this work, a novel self-on controlled-release electrochemiluminescence (CRE) biosensor was designed by multiple signal amplification and framework-enhanced stability strategies. As a result, the changes of the ECL signal were enhanced before and after the controlled-release process, achieving sensitive detection of prostate-specific antigen (PSA). Specifically, for one thing, Fe3O4@CeO2-NH2 with two paths for enhancing the generation of coreactant radicals was used as the coreaction accelerator to boost ECL performance. For another, due to the framework stability, zeolitic imidazolate framework-8-NH2 (ZIF-8-NH2) was combined with luminol to make the ECL signal more stable. Based on these strategies, the constructed CRE biosensor showed a strong self-on effect in the presence of PSA and high sensitivity in a series of tests. The detection range and limit of detection (LOD) were 5 fg/mL to 10 ng/mL and 2.8 fg/mL (S/N = 3), respectively, providing a feasible approach for clinical detection of PSA.

The influence of H2O or/and O2 introduction during the low-temperature gas-phase sulfation of organic COS + CS2 on the conversion and deposition of sulfur-containing species in the sulfated CeO2-OS catalyst for NH3-SCR

Herein, the typical components of blast furnace gas, including H2O and O2, were introduced to improve the NH3-SCR activity of the sulfated CeO2-OS catalyst during the gas-phase sulfation of organic COS + CS2 at 50 °C. The characterization results demonstrate that the introduction of O2 or H2O during gas-phase sulfation enhances the conversion of organic COS + CS2 on a cubic fluorite CeO2 surface and reduces the formation of sulfur and sulfates in the catalyst, but decreases the BET surface area and pore volume of the sulfated CeO2-OS catalyst. However, the introduction of O2 or H2O during the gas-phase sulfation increases the molar ratios of Ce3+/(Ce3+ + Ce4+) and Oβ/(Oα + Oβ + Oγ) on the sulfated CeO2-OS catalyst surface, thus promoting the formation of surface oxygen vacancies and chemisorbed oxygen, and these properties of the catalyst are further enhanced by the co-existence of O2 and H2O. Furthermore, the reduction of sulfates formed under the action of O2 or H2O decreases the weak acid sites of the sulfated CeO2-OS catalyst, but the few and highly dispersive sulfates present stronger reducibility, and the proportion of medium-strong acid sites of the catalyst increases. These factors help to improve the NH3-SCR activity of the sulfated CeO2-OS catalyst. Thus, there exists a synergistic effect of H2O and O2 introduction during gas-phase sulfation on the physical-chemical properties and catalytic performance of the sulfated CeO2-OS catalyst by organic COS + CS2 at 50 °C.

Glucose oxidation induced pH stimuli response controlled release electrochemiluminescence biosensor for ultrasensitive detection of CYFRA 21-1

Herein, a self on electrochemiluminescence (ECL) biosensor was constructed by pH stimuli response controlled release strategy, in which SiO2-PEI as the carrier, BSA/luminol-Ab2 as the encapsulated substance, gold nanoparticles (Au NPs) as the blocking cap, glucose as the inducer. In addition, CeO2-Au was used as catalyst, which generated more O2•- to increase the ECL signal. Under the action of voltage, the glucose was oxidized to gluconic acid, which induced the pH to decrease accordingly. Therefore, Au NPs were stimulated to fall from the surface of SiO2-PEI, releasing the BSA/luminol-Ab2 to realize self on mode. With such design, the constructed self on ECL biosensor owned an ultrasensitive detection capacity of CYFRA 21-1, showing an excellent linear relationship in the range of 0.001-100000 ng/L and 0.4 fg/mL low limit of detection (LOD). It provided an innovative idea for the biosensor construction to clinical detection of lung cancer.

Catalytic conversion of carbohydrates into 5-ethoxymethylfurfural using γ-AlOOH and CeO2@B2O3 catalyst synergistic effect

Selective catalytic conversion of carbohydrates to 5-ethoxymethylfurfural (EMF) is a critical approach to the biorefinery. In this work, solid acid catalysts of γ-AlOOH and CeO₂@B₂O₃ were used to convert carbohydrates to EMF in a one-pot process, performed in an ethanol/DMSO solvent system. The synergistic effect of γ-AlOOH and CeO₂@B₂O₃ was studied. Furthermore, the morpho-structural properties of the catalysts were characterized, and the effects of reaction time, reaction temperature, catalyst load, and the amount of cosolvent on the conversion of glucose to EMF were examined and optimized. Under the reaction conditions of 170 °C for 20 h, glucose, sucrose, cellobiose, inulin and starch were used as raw materials, and the EMF yield range was 9.2–27.7%. The results showed that the synergistic effect of γ-AlOOH and CeO₂@B₂O₃ further causes the combination of multiple acid sites with different types and strength distributions. Particularly, the collaboration between weak, medium-strong, and strong acid, as well as between Lewis and Brønsted acidity, is of great significance for EMF generation. The reusability experiments showed that the combined catalytic system was easily separated and maintained catalytic activity for five successive reactions without further intermediate regeneration steps. This work provides a promising route for the catalytic conversion of biomass-derived carbohydrates into EMF.

γ-AlOOH and CeO₂@B₂O₃ solid acid catalysts were synthesized for the one-pot selective conversion of carbohydrates into 5-ethoxymethylfurfural under their synergistic catalysis.

Rare Self-Luminous Mixed-Valence Eu-MOF with a Self-Enhanced Characteristic as a Near-Infrared Fluorescent ECL Probe for Nondestructive Immunodetection

Steady and efficient sensitized emission of Eu²⁺ to Eu³⁺ can be achieved through a rare mixed-valence Eu-MOF (L₄Eu^III₂Eu^II). Compared with the sensitization of other substances, the similar ion radius and configuration of the extranuclear electron between Eu²⁺ and Eu³⁺ make sensitization easier and more efficient. The sensitization of Eu²⁺ to Eu³⁺ is of great assistance for the self-enhanced luminescence of L₄Eu^III₂Eu^II, the longer luminous time, and the more stable electrochemiluminescence (ECL) signal. Simultaneously, L₄Eu^III₂Eu^II possesses near-infrared (NIR) fluorescence of around 900 nm and a mighty self-luminous characteristic, which render it useful as a NIR fluorescent probe and as a luminophore to establish a NIR ECL biosensor. This NIR biosensor can greatly reduce the damage to the detected samples and even achieve a nondestructive test and improve the detection sensitivity by virtue of strong susceptibility and environmental suitability of NIR. In addition, the CeO₂@Co₃O₄ triple-shelled microspheres further enhanced the ECL intensity due to two redox pairs of Ce³⁺/Ce⁴⁺ and Co²⁺/Co³⁺. The NIR ECL biosensor based on these strategies owns an ultrasensitive detection ability of CYFRA 21-1 with a low limit of detection of 1.70 fg/mL and also provides a novel idea for the construction of a highly effective nondestructive immunodetection biosensor.

Current scenario of CNG vehicular pollution and their possible abatement technologies: an overview

Compressed natural gas is an alternative green fuel for automobile industry. Recently, the Indian government is targeting to replace all the conventional fuel vehicles by compressed natural gas (CNG) automobiles due to its several merits. Still, the presence of a significant amount of CO, CH₄, and NO_x gases in the CNG vehicle exhaust are quiet a matter of concern. Thus, to control the emissions from CNG engines, the major advances are under development of and oxidation is one of them in catalytic converter. In literature, the catalysts such as noble and non-noble metals have been reported for separate oxidation of CO and CH_4.. Experimentally, it was found that non-noble metal catalysts are preferred due to its low cost, good thermal stability, and molding tractability. In literature, several articles have been published for CO and CH₄ oxidation but no review paper is still available. Thus, the present review provides a comprehensive overview of separate as well as simultaneous CO and CH₄ oxidation reactions for CNG vehicular emission control.

Catalytic activity boost of CeO2/Co3O4 nanospheres derived from CeCo-glycolate via yolk–shell structural evolution

CeO₂/Co₃O₄ hybrid nanospheres have been successfully prepared via thermal decomposition of CeCo-glycolate precursors.

Highly Reducible Nanostructured CeO2 for CO Oxidation

Ceria in nanoscale with different morphologies, rod, tube and cube, were prepared through a hydrothermal process. The structure, morphology and textural properties were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM) and isothermal N2 adsorption-desorption. Ceria with different morphologies were evaluated as catalysts for CO oxidation. CeO2 nanorods showed superior activity to the others. When space velocity was 12,000 mL·gcat−1·h−1, the reaction temperature for 90% CO conversion (T90) was 228 °C. The main reason for the high activity was the existence of large amounts of easily reducible oxygen species, with a reduction temperature of 217 °C on the surface of CeO2 nanorods. Another cause was their relatively large surface area.

Superior catalytic performance of a CoOx/Sn–CeO2 hybrid material for catalytic diesel soot oxidation

A Co₃O₄/Sn–CeO₂ hybrid catalyst exhibited superior soot oxidation activity due to the existence of synergism among the multivalent cations and the stepped surface of the hybrid catalyst.