A new Eosin Y-based 'turnon' fluorescent sensor for ratiometric sensing of toxic mercury ion (Hg2+) offering unaided eye detection and its antibacterial activity

A unique fluorescent molecule (ND-S) was obtained from Eosin Y in two simple yet high yielding steps (1). ND-S has special metal ion sensing ability, such that it can selectively detect toxic Hg2+ present in very low concentration in aqueous solutions in the presence of other competing metal ions. The host-guest complexation is ratiometric and is associated with significant increase in fluorescence during the process. Isothermal titration calorimetry (ITC) experiments provided thermodynamic parameters related to interaction between ND-S and Hg2+. Using inductively coupled plasma mass spectrometry (ICP-MS), the Hg2+(aq) removal efficiency of ND-S was estimated to be 99.88%. Appreciable limit of detection (LOD = 7.4 nM) was observed. Other competing ions did not interfere with the sensing of Hg2+ by ND-S. The effects of external stimuli (temperature and pH) were studied. Besides, the complex (ND-M), formed by 1:1 coordination of ND-S and Hg2+ was found to be effective against the survival of Gram-positive bacteria (S. aureus and B. subtilis) with a high selectivity index. Moreover, bacterial cell death mechanism was studied systematically. Overall, we have shown the transformation of a toxic species (Hg2+), extracted from polluted water by a biocompatible sensor (ND-S), into an effective and potent antibacterial agent (ND-M).

A zwitterionic probe for ratiometric fluorescent detection of aluminium(III) ion in aqueous medium and its application in bioimaging

In the present study, we have synthesized an aminobenzoic acid containing Schiff base (compound 1) and its structure was confirmed through single crystal X-ray study. Importantly, the compound 1 crystallizes in the zwitterionic form, with an anionic carboxylate group (-COO-) and a cationic iminium group (-C = NH+-). The compound 1 is highly soluble in water due to its zwitterionic feature in the solid state. Interestingly, compound 1 acts as a ratiometric fluorescent probe for the selective detection of Al3+ ion in aqueous solution without organic cosolvent. It can also detect Al3+ ion by visual colour change to bluish-green fluorescence under 365 nm UV light. The association constant between compound 1 with Al3+ ion was estimated to be 1.67 × 104 M-1. The lowest detection limit for Al3+ ion was calculated to be 7.05 × 10-8 M in water. Compound 1 in combination with Al3+ ion demonstrated fluorescent imaging potential of the nucleus of in RAW 264.7 murine macrophage cell line. In addition, the sensing model is developed as paper based sensor ''Test Kit' 'for its practical applicability.

Fluorescent deactivation behaviors based on ESIPT and TICT of novel double target fluorescent probe and its sensing mechanism for Al3+/Mg2+: A TD-DFT study

Based on density functional theory (DFT) and time-dependent DFT (TD-DFT) methods with integral equation formula polarized continuum model (IEFPCM), the fluorescent behavior and recognizing mechanism of probe N'-((1-hydroxynaphthalen-2-yl)methylene)isoquinoline-3-carbohydrazide (NHMI) for Al³⁺/Mg²⁺ ion were investigated in more detail. Excited state intramolecular proton transfer (ESIPT) process in probe NHMI occurs in the stepwise pattern. The proton H₅ of enol structure (E1) firstly moves from O₄ to N₆ to form single proton-transfer (SPT2) structure, and then the proton H₂ of SPT2 transfers from N₁ to N₃ to form the stable double proton-transfer (DPT) structure. Subsequently, the transformation from DPT to its isomer (DPT1) induces the twisted intramolecular charge transfer (TICT) process. Two non-emissive TICT states (TICT1 and TICT2) were obtained, and TICT2 state quenches the fluorescence observed in the experiment. With the addition of aluminum (Al³⁺) or magnesium (Mg²⁺) ion, TICT process is prohibited by the coordination interaction between NHMI and Al³⁺/Mg²⁺, and the strong fluorescent signal is turned on. For probe NHMI, the twisted C-N single bond of acylhydrazone part leads to the TICT state. This sensing mechanism may inspire researchers to develop new probes from a different direction.

Computational Insights into Sensing Mechanism for Al3+ in a New Acylhydrazone Fluorescent Probe Based on Excited-State Intramolecular Proton Transfer (ESIPT) and Twisted Intramolecular Charge Transfer (TICT)

The work explored the fluorescent properties of probe N'-(2, 4-dihydroxy-benzylidene)pyridine-3-carbohydrazide (HL) and its sensing mechanism for the Al³⁺ ion in detail. HL has two competing deactivation processes: ESIPT and TICT. Upon light-excitation, only one proton can transfer, and the SPT1 structure is generated. The SPT1 form is highly emissive, which is inconsistent with the colorless emission observed in the experiment. Then a nonemissive TICT state was obtained by rotating the C-N single bond. The energy barrier of the TICT process is lower than that of the ESIPT process, which indicates that probe HL will decay to the TICT state and quench the fluorescence. When Al³⁺ is recognized by probe HL, strong coordinate bonds are formed between HL and Al³⁺, and then the TICT state is prohibited, and the fluorescence of HL is turned on. Al³⁺ as a coordinated ion can effectively remove the TICT state but cannot influence the photoinduced electron transfer (PET) process of HL.

Discriminative 'Turn-on' Detection of Al3+ and Ga3+ Ions as Well as Aspartic Acid by Two Fluorescent Chemosensors

In this work, two Schiff-base-based chemosensors L1 and L2 containing electron-rich quinoline and anthracene rings were designed. L1 is AIEE active in a MeOH-H₂O solvent system while formed aggregates as confirmed by the DLS measurements and fluorescence lifetime studies. The chemosensor L1 was used for the sensitive, selective, and reversible 'turn-on' detection of Al³⁺ and Ga³⁺ ions as well as Aspartic Acid (Asp). Chemosensor L2, an isomer of L1, was able to selectively detect Ga³⁺ ion even in the presence of Al³⁺ ions and thus was able to discriminate between the two ions. The binding mode of chemosensors with analytes was substantiated through a combination of ¹H NMR spectra, mass spectra, and DFT studies. The 'turn-on' nature of fluorescence sensing by the two chemosensors enabled the development of colorimetric detection, filter-paper-based test strips, and polystyrene film-based detection techniques.

FRET based ratiometric switch for selective sensing of Al3+ with bio-imaging in human peripheral blood mononuclear cells

FRET based ratiometric switch for selective sensing of Al³⁺ with bio-imaging in human peripheral blood mononuclear cells (PBMCs).

A novel near-infrared turn-on fluorescent probe for the detection of Fe3+ and Al3+ and its applications in living cells imaging

In this study, a new hemicyanidine-based colorimetric-fluorescent probe L has been synthesized and characterized by X-ray single crystal diffraction, NMR, HRMS and other technologies. The probe L serves as a "turn-on" probe for the detection of Fe³⁺ and Al³⁺ ions in DMF-HEPES system with a high sensitivity and an excellent selectivity. The probe L manifesting the color of the solution containing L turns red on the addition of Fe³⁺, and turns pink on the addition of Al³⁺. The fluorescence turn-on detection of Fe³⁺ and Al³⁺ ions is attributed to the photo-induced electron transfer (PET) process and the exertion of the chelation-enhanced fluorescence effect (CHEF) mechanism. The results of thin layer silica gel plate coloration experiments also present the same characteristics. Additionally, we further demonstrate that the probe L exhibit good cell permeability and could be employed to monitor Fe³⁺ and Al³⁺ ions in the living cells.

Sensing mechanism of a fluorescent probe for thiophenols: Invalidity of excited-state intramolecular proton transfer mechanism

Simple and effective detection of thiophenols has attracted great attention. A fluorescent probe 1 with high selectivity and sensitivity is designed and synthesized based on the excited-state intramolecular proton transfer (ESIPT) in experiment. However, we conclude that the ESIPT process fails to happen actually based on the calculation results. In the present work, the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods are employed to investigate the real sensing mechanism. The calculated absorption and emission spectra agree well with the experimental results. By comparing the energy of enol and keto configurations and the constructed potential energy surfaces (PESs) in the ground (S₀) and excited (S₁) states of 3-(benzo[d]thiazol-2-yl)-10-butyl-10H-phenothiazin-2-ol (dye 2), the ESIPT process is confirmed impossible because of the relatively high keto form energy and potential energy barrier. Besides, the transition state of dye 2 is optimized to offer the accurate potential energy barrier. The results of calculated frontier molecular orbitals (FMOs) and spectra indicate that it is the photoinduced electron transfer (PET) process that results in the fluorescence quenching of probe 1. After adding thiophenols, the thiolysis of 2,4-dinitrophenyl ether bond is triggered and dye 2, which emits strong fluorescence because of the absence of PET process, is obtained. Consequently, our study has demonstrated that probe 1 can act as a fluorescent probe to detect thiophenols through the off-on fluorescence variation based on the PET mechanism but not the ESIPT process.

Sensing mechanism of a ratiometric near-infrared fluorescent chemosensor for cysteine hydropersulfide: Intramolecular charge transfer

Previous studies have shown that the cysteine hydropersulfide (Cys-SSH) as the sulfur donor is crucial to sulfur-containing cofactors synthesis. Recently, a selective and sensitive near-infrared ratiometric fluorescent chemosensor Cy-DiSe has been designed and synthesized to detect Cys-SSH spontaneously. Herein, by means of the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) approaches, the sensing mechanism has been thoroughly explored. According to our calculations, the experimental data have been reproduced. The results indicate the intramolecular charge transfer (ICT) is the reason for changes in fluorescence wavelengths. Compared with the chemosensor Cy-DiSe, the larger energy gap of Cy induced by ICT mechanism leads to the blue-shift of the absorption and emission spectra, which guarantees that Cy-DiSe can become a ratiometric fluorescent chemosensor to detect Cys-SSH.

A simple and sensitive fluorescent sensor platform for Al3+ sensing in aqueous media and monitoring through combined PET and ESIPT mechanisms: practical applications in drinking water and bio-imaging

A novel hydrazide-based probe was designed and prepared as a fluorogenic “turn-on” sensor for Al³⁺ sensing in aqueous media.

A Benzothiazole-Based Fluorescent Probe for Ratiometric Detection of Al3+ and Its Application in Water Samples and Cell Imaging

An easily prepared benzothiazole-based probe (BHM) was prepared and characterized by general spectra, including ¹H NMR, ¹³C NMR, HRMS, and single-crystal X-ray diffraction. Based on the synergistic mechanism of the inhabitation of intramolecular charge transfer (ICT), the BHM displayed high selectivity and sensitivity for Al³⁺ in DMF/H₂O (v/v, 1/1) through an obvious blue-shift in the fluorescent spectrum and significant color change detected by the naked eye, respectively. The binding ratio of BHM with Al³⁺ was 1:1, as determined by the Job plot, and the binding details were investigated using FT-IR, ¹H NMR titration, and ESI-MS analysis. Furthermore, the BHM was successfully applied in the detection of Al³⁺ in the Songhua River and on a test stripe. Fluorescence imaging experiments confirmed that the BHM could be used to monitor Al³⁺ in human stromal cells (HSC).

Pyrene-phenylglycinol linked reversible ratiometric fluorescent chemosensor for the detection of aluminium in nanomolar range and its bio-imaging

Pyrene-phenylglycinol tangled ratiometric sensor (R)-1 was developed for the detection of Al³⁺ ion over other metal ions. Ratiometric behaviour of (R)-1 for Al³⁺ ion explained through monomer emission and excimer quenching leads to avoiding the π-π interactions of bis-pyrene rings. Pull-push to push-pull binding mechanism is successfully explained by DFT and sensing of Al³⁺-ions demonstrated in living cells. The LOD of (R)-1 for Al³⁺ downs to nanomolar concentrations which is lower than the allowed concentration of drinking water set by the (World Health Organization) WHO.

Dual-functional probe based on rhodamine for sequential Cu2+ and ATP detection in vivo

A rhodamine-based fluorescent probe for Cu²⁺ and ATP has been designed. The fluorescence intensity/absorbance was significantly enhanced upon the addition of Cu²⁺ owning to the opening of the spiro-ring of rhodamine, which quickly returned to the original level due to the reconstruction of the probe by the reacting with ATP. Cu²⁺/ATP-induced fluorescent intensity/aborbance changes showed a good linear relationship with the concentration of Cu²⁺/ATP in the range of 2-20 μM/0-10 μM with a detection limit of 0.1 μM/1.0 μM. The proposed method is simple in design and fast in operation, and is suitable for the reversible monitoring of Cu²⁺ and ATP in bioanalytical applications.

Fabrication of a self-assembled supramolecular fluorescent nanosensor from functional graphene oxide and its application for the detection of Al3+

In this work, we present an excellent water-soluble supramolecular self-assembled fluorescent nanosensor toward Al³⁺based on graphene oxide and a β-cyclodextrin derivative.