Advanced photocatalytic materials based degradation of micropollutants and their use in hydrogen production - a review

The use of pharmaceuticals, dyes, and pesticides in modern healthcare and agriculture, along with expanding industrialization, heavily contaminates aquatic environments. This leads to severe carcinogenic implications and critical health issues in living organisms. The photocatalytic methods provide an eco-friendly solution to mitigate the energy crisis and environmental pollution. Sunlight-driven photocatalytic wastewater treatment contributes to hydrogen production and valuable product generation. The removal of contaminants from wastewater through photocatalysis is a highly efficient method for enhancing the ecosystem and plays a crucial role in the dual-functional photocatalysis process. In this review, a wide range of catalysts are discussed, including heterojunction photocatalysts and various hybrid semiconductor photocatalysts like metal oxides, semiconductor adsorbents, and dual semiconductor photocatalysts, which are crucial in this dual function of degradation and green fuel production. The effects of micropollutants in the ecosystem, degradation efficacy of multi-component photocatalysts such as single-component, two-component, three-component, and four-component photocatalysts were discussed. Dual-functional photocatalysis stands out as an energy-efficient and cost-effective method. We have explored the challenges and difficulties associated with dual-functional photocatalysts. Multicomponent photocatalysts demonstrate superior efficiency in degrading pollutants and producing hydrogen compared to their single-component counterparts. Dual-functional photocatalysts, incorporating TiO2, g-C3N4, CeO2, metal organic frameworks (MOFs), layered double hydroxides (LDHs), and carbon quantum dots (CQDs)-based composites, exhibit remarkable performance. The future of synergistic photocatalysis envisions large-scale production facilitate integrating advanced 2D and 3D semiconductor photocatalysts, presenting a promising avenue for sustainable and efficient pollutant degradation and hydrogen production from environmental remediation technologies.

Ag-loaded BiFeO3/CuS heterostructured based composite: an efficient photocatalyst for removal of antibiotics and antibacterial activities

The performance of advanced materials in environmental applications using green energy is the tremendous interest among researchers. The visible light responsive BiFeO3 (BFO), BiFeO3/CuS (BFOC), and Ag-loaded BiFeO3/CuS (Ag-BFOC) heterostructures have been synthesized by reflux method followed by hydrothermal and wetness impregnation method. These synthesized composites are well characterized through X-ray diffraction, UV diffuse reflectance spectroscopy, scanning electron microscope, and Fourier transfer infrared spectroscopy techniques. Compared with BFO and BFOC, Ag-BFOC exhibits the highest photocatalytic performance towards the degradation of antibiotics ciprofloxacin (76%) within 120-min time and also showed better antibacterial performance towards gram-negative (Escherichia coli, Klebsiella pneumoniae, and Acinetobacter baumannii) bacteria. Moreover, the novelty of the present work is the addition of CuS on the surface of BiFeO3 from heterojunction type II and facilitates the electron-hole channelization at the interfaces between BiFeO3 and CuS. Again, the loading of Ag on BiFeO3/CuS helps in shifting the absorption band towards the red end, is eligible to absorb more sunlight due to surface plasmon resonance effect, improves the separation efficiency of photo-generated charge carriers, and enhances the photocatalytic degradation of ciprofloxacin. The antibacterial property of Ag gives a best result towards antimicrobial activity. The prepared composites have proved their durability and stability by four successive cycles and prove the versatility of the composite.

Photocatalytic degradation-based efficient elimination of pesticides using ruthenium/gold metal nanoparticle-anchored zirconium dioxide

Ruthenium and gold metal nanoparticles-incorporated zirconium dioxide (ZrO2@Ru and ZrO2@Au) nanostructures were developed as promising photocatalysts for wastewater remediation.

Recent advances in structural modifications of photo-catalysts for organic pollutants degradation - A comprehensive review

Over the last few years, industrial and anthropogenic activities have increased the presence of organic pollutants such as dyes, herbicides, pesticides, analgesics, and antibiotics in the water that adversely affect human health and the environment worldwide. Photocatalytic treatment is considered a promising, economical, effective, and sustainable process that utilizes light energy to degrade the pollutants in water. However, certain drawbacks like rapid recombination and low migration capability of photogenerated electrons and holes have restricted the use of photo-catalysts in industries. Hence, despite the abundance of lab-scale research, the technology is still not much commercialized in the mainstream. Several structural modifications in the photo-catalysts have been adopted to enhance the pollutant degradation performance to overcome the same. In this context, the present review article outlines the different advanced heterostructures synthesized to date for improved degradation of three major organic pollutants: antibiotics, dyes, and pesticides. Moreover, the article also emphasizes the degradation kinetics of photo-catalysts and the publication trend in the past decade along with the roadblocks preventing the transfer of technology from the laboratory to industry and new age photo-catalysts for the profitable implications in industrial sectors.

Enhanced the photoelectrochemical performance of Bi2XO6 (X = W, Mo) for detecting hexavalent chromium by modification of CuS

In this work, Bi₂XO₆ (X = W, Mo) are synthesized at different temperatures. The results of tests find the optimal temperatures of Bi₂WO₆ and Bi₂MoO₆ are 180 and 160°C (BW-180, BM-160). Then, BW-180 and BM-160 are further compounded with different contents of CuS. The results of photoelectrochemical (PEC) tests show that CuS can improve the PEC performance of semiconductor materials, and it has better performance when CuS mass fraction is 5%. These maybe the photoelectron potentials generated by CuS/Bi₂XO₆ (X = Mo, W) heterojunction reduce the combination of photogenerated electrons and holes. When the PEC sensor based on 5%-CuS/BW-180 detects Cr(VI), it has a linear range of 1-80 μmol/L with detection limit of 0.95 μmol/L, while the PEC sensor based on 5%-CuS/BM-160 detects Cr(VI) has a linear range of 0.5-230 μmol/L and a detection limit of 0.12 μmol/L. Thus, 5%-CuS/Bi₂XO₆ has potential application in hexavalent chromium detection.

Pesticide degradation on solid surfaces: a moisture dependent process governed by the interaction between TiO2 and H2O

The solid-phase photocatalytic degradation is a humidity control process through the interaction between H₂O and TiO₂.

Modulating photoelectrochemical water splitting performance by constructing a type-II heterojunction between g-C3N4 and BiOI

g-C₃N₄/BiOI type-II heterojunction prepared by ultrasonically aided hydrothermal method exhibits high stability during PEC water splitting for up to 6000 s at 1.23 V vs. RHE.

Designing novel morphologies of l-cysteine surface capped 2D covellite (CuS) nanoplates to study the effect of CuS morphologies on dye degradation rate under visible light

Novel CuS@l-Cys NPs are designed by a hydrothermal route. The effects of synthetic parameters on the morphologies of CuS@l-Cys NPs were investigated. CuS@l-Cys NPs exhibit an enhanced dye degradation rate under visible light.

The design and growth of peanut-like CuS/BiVO4 composites for photoelectrochemical sensing

In this study, the CuS/BiVO₄-X (where X represents the mass percentage of CuS associated with CuS/BiVO₄; X = 2%, 5% and 7%) p–n heterostructures were fabricated using a two-step hydrothermal method.

Carbon Dioxide Photoreduction on the Bi2S3/MoS2 Catalyst

The photocatalytic activity of a material is contingent on efficient light absorption, fast electron excitation, and control of the recombination rate by effective charge separation. Inorganic materials manufactured in unique shapes via controlled synthesis can exhibit significantly improved properties. Here, n-type Bi2S3 nanorods (with good optical activity) were wrapped with two-dimensional (2D) p-type MoS2 sheets, which have good light absorption properties. The designed p-n junction Bi2S3/MoS2 composite exhibited enhanced light absorption over the entire wavelength range, and higher carbon dioxide adsorption capacity and photocurrent density compared to the single catalysts. Consequently, the activity of the 1Bi2S3/1MoS2 composite catalyst for the photocatalytic reduction of carbon dioxide was more than 20 times higher than that of the single catalysts under visible-light irradiation at ≤400 nm, with partial selectivity for CO conversion. This is attributed to the p-n heterojunction Bi2S3/MoS2 composite designed in this study, the high light absorption of n-Bi2S3, accelerated electron excitation, and the electron affinity of the 2D sheet-p-MoS2, which quickly absorbed excited electrons, resulting in effective charge separation. This ultimately improved the catalytic performance by continuously supplying catalytically active sites to the heterojunction interfaces.

2D In-Plane CuS/Bi2WO6 p-n Heterostructures with Promoted Visible-Light-Driven Photo-Fenton Degradation Performance

Photo-Fenton degradation of pollutants in wastewater is an ideal choice for large scale practical applications. Herein, two-dimensional (2D) in-plane CuS/Bi₂WO₆ p-n heterostructures have been successfully constructed by an in situ assembly strategy and characterized using XRD, XPS, SEM/TEM, EDX, UV-Vis-DRS, PL, TR-PL, ESR, and VB-XPS techniques. The XPS and the TEM results confirm the formation of CuS/Bi₂WO₆ heterostructures. The as-constructed CuS/Bi₂WO₆ showed excellent absorption in visible region and superior charge carrier separation efficiency due to the formation of a type-II heterojunctions. Under visible light irradiation, 0.1% CuS/Bi₂WO₆ heterostructure exhibited the best photo-Fenton-like catalytic performance. The degradation efficiency of Rhodamine B (RhB, 20 mg·L⁻¹) can reach nearly 100% within 25 min, the apparent rate constant (k_app/min⁻¹) is approximately 40.06 and 3.87 times higher than that of pure CuS and Bi₂WO₆, respectively. The degradation efficiency of tetracycline hydrochloride (TC-HCl, 40mg·L⁻¹) can reach 73% in 50 min by employing 0.1% CuS/Bi₂WO₆ heterostructure as a photo-Fenton-like catalyst. The promoted photo-Fenton catalytic activity of CuS/Bi₂WO₆ p-n heterostructures is partly ascribed to its low carriers recombination rate. Importantly, CuS in CuS/Bi₂WO₆ heterostructures is conducive to the formation of heterogeneous photo-Fenton catalytic system, in which Bi₂WO₆ provides a strong reaction site for CuS to avoid the loss of Cu²⁺ in Fenton reaction, resulting in its excellent stability and reusability. The possible photo-Fenton-like catalytic degradation mechanism of RhB and TC-HCl was also elucidated on the basis of energy band structure analysis and radical scavenger experiments. The present study provides strong evidence for CuS/Bi₂WO₆ heterostructures to be used as promising candidates for photo-Fenton treatment of organic pollutants.