Chitosan-Derived N-Doped Carbon for Light-Mediated Carbon Dioxide Fixation into Epoxides

A series of calcined Chitosan (CS) photothermal catalysts are prepared by heating the biopolymer at different temperatures. The photothermal conversion (light to heat) ability of these calcined CS materials is evaluated by measuring the temperature change with respect to time and lamp power. The material prepared at 300 °C (Cal-CS-300) shows excellent photothermal conversion ability which is explored for the CO2 cycloaddition reaction with epoxides to produce cyclic carbonates under mild reaction parameters (1 atm CO2 pressure, 25 °C). The study reveals the importance of defects present in the material on both photothermal conversion and CO2 fixation efficiency. Under optimized reaction conditions, Cal-CS-300 is able to convert a range of epoxides into their respective cyclic carbonates (>97 % selectivity) and retains its catalytic activity (~86 %) for 5 cycles of catalysis without losing its chemical integrity. The use of ubiquitously available biopolymer together with light makes this approach sustainable for preparing value added chemicals.

Heterogeneous V2O5/TiO2-Mediated Photocatalytic Reduction of Nitro Compounds to the Corresponding Amines under Visible Light

The hydrogenation of nitro compounds to their corresponding amines is developed using a heterogeneous and recyclable catalyst (V₂O₅/TiO₂) under irradiation of blue LED (9 W) at ambient temperature. Hydrazine hydrate is used as a reductant and ethanol is used as a solvent, facilitating green, sustainable, low-cost production. The synthesis of 32 (hetero)arylamines and their pharmaceutically relevant molecules (five) are described. Significant features of the protocol include catalyst recyclability, green solvent, ambient temperature, and gram-scale reactions. Among the other aspects studied are ¹H-NMR-assisted reaction progress monitoring, control experiments for mechanistic studies, protocol applications, and recyclability studies. Furthermore, the developed protocol enabled wide functional group tolerance, chemo-selectivity, high yield, and low-cost, sustainable, and environmentally benign synthesis.

Alumina-Based Bifunctional Catalyst for Efficient CO2 Fixation into Epoxides at Atmospheric Pressure

The quest toward sustainability and decarbonization demands the development of methods for efficient carbon dioxide capture and utilization. The nonreductive CO₂ fixation into epoxides to prepare cyclic carbonates has gained attention in recent years. In this work, we report the development of guanidine hydrochloride-functionalized γ alumina (γ-Al₂O₃), prepared using green solvents, as an efficient bifunctional catalyst for CO₂ fixation. The resulting guanidine-grafted γ-Al₂O₃ (Al-Gh) proved to be an excellent catalyst to prepare cyclic carbonates from epoxides and CO₂ with high selectivity. The nitrogen-rich Al-Gh shows increased CO₂ adsorption capacity compared to that of γ-Al₂O₃. The as-prepared catalyst was able to carry out CO₂ fixation at 85 °C under atmospheric pressure in the absence of solvents and external additives (e.g., TBAI or KI). The material showed negligible loss of catalytic activity even after five cycles of catalysis. The catalyst successfully converted many epoxides into their respective cyclic carbonates under the optimized conditions. The gram-scale synthesis of commercially important styrene carbonates from styrene oxide and CO₂ using Al-Gh was also achieved. Density functional theory (DFT) calculations revealed the role of alumina in activating the epoxide. This activation facilitated the chloride ion to open the ring to react with CO₂. The DFT studies also validated the role of alumina in stabilizing the electron-rich intermediates during the course of the reaction.

NiII NPs entrapped within a matrix of l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube: a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks

In the present study, a new l-glutamic acid cross-linked chitosan supported on magnetic carboxylic acid-functionalized multi-walled carbon nanotube (Fe₃O₄/f-MWCNT-CS-Glu) nanocomposite was prepared through a convenient one-pot multi-component sequential strategy. Then, nickel^II nanoparticles (Ni^II NPs) were entrapped within a matrix of the mentioned nanocomposite. Afterward, the structure of the as-prepared Fe₃O₄/f-MWCNT-CS-Glu/Ni^II nanosystem was elucidated by various techniques, including FT-IR, PXRD, SEM, TEM, SEM-based EDX and elemental mapping, ICP-OES, TGA/DTA, and VSM. In the next part of this research, the catalytic applications of the mentioned nickel^II-containing magnetic nanocomposite were assessed upon green one-pot synthesis of diverse heterocyclic frameworks, including bis-coumarins (3a–n), 2-aryl(or heteroaryl)-2,3-dihydroquinazolin-4(1H)-ones (5a–r), 9-aryl-3,3,6,6-tetramethyl-3,4,5,6,7,9-hexahydro-1H-xanthene-1,8(2H)-diones (7a–n), and 2-amino-4-aryl-7,7-dimethyl-5-oxo-5,6,7,8-tetrahydro-4H-chromene-3-carbonitriles (9a–n). The good-to-excellent yields of the desired products, satisfactory reaction rates, use of water solvent or solvent-free reaction medium, acceptable turnover numbers (TONs) and turnover frequencies (TOFs), along with comfortable recoverability and satisfying reusability of the as-prepared nanocatalyst for at least eight successive runs, and also easy work-up and purification procedures are some of the advantages of the current synthetic protocols.

In this research work, an Fe₃O₄/f-MWCNT-CS-Glu/Ni^II hybrid nanocomposite was synthesized, characterized, and used as a new and efficient multi-task catalytic system for the green one-pot synthesis of diverse heterocyclic frameworks.

Recent Advances in Imidazolium-Based Dicationic Ionic Liquids as Organocatalysts: A Mini-Review

Imidazolium-based dicationic ionic liquids (DILs) are gaining considerable space in the field of organocatalysis mainly due to the opportunities in offering new possible applicable structural variations. In addition to the well-known variables which made the ionic liquids (ILs) famous as the type of cation and anion used, the nature of the molecular spacer moiety turns out a further possibility to improve some physicochemical properties, for example, solubility, acidity, electrochemical behavior, and so on. For this reason, this class of ionic liquids has been considered as possible competitors to their corresponding monocationic salts in replacing common catalysts in organic synthesis, particularly in cases in which their bidentate nature could positively affect the catalytic activity. This mini-review is intended to highlight the progress carried out in the last six years in the field of organocatalysis, including DILs as such and as hybrids with polymers, nanomaterials, and composites.

Novel hydroxyl-functionalized ionic liquids as efficient catalysts for the conversion of CO2 into cyclic carbonates under metal/halogen/cocatalyst/solvent-free conditions

Environmentally friendly synthesis route to carbonates from CO2 and epoxides catalysed by novel hydroxyl-functionalized ionic liquids under metal/halogen/cocatalyst/solvent-free conditions.

A Bio-Based Alginate Aerogel as an Ionic Liquid Support for the Efficient Synthesis of Cyclic Carbonates from CO2 and Epoxides

In this work, the ionic liquid [Aliquat][Cl] was supported into alginate and silica aerogel matrices and applied as a catalyst in the cycloaddition reaction between CO2 and a bio-based epoxide (limonene oxide). The efficiency of the alginate aerogel system is much higher than that of the silica one. The method of wet impregnation was used for the impregnation of the aerogel with [Aliquat][Cl] and a zinc complex. The procedure originated a well-defined thin solvent film on the surface of support materials. Final materials were characterised by Fourier Transform Infrared Spectroscopy, N2 Adsorption–Desorption Analysis, X-ray diffraction, atomic absorption and Field Emission Scanning Microscopy. Several catalytic tests were performed in a high-pressure apparatus at 353.2 K and 4 MPa of CO2.

A comprehensive survey upon diverse and prolific applications of chitosan-based catalytic systems in one-pot multi-component synthesis of heterocyclic rings

Heterocyclic compounds are among the most prestigious and valuable chemical molecules with diverse and magnificent applications in various sciences. Due to the remarkable and numerous properties of the heterocyclic frameworks, the development of efficient and convenient synthetic methods for the preparation of such outstanding compounds is of great importance. Undoubtedly, catalysis has a conspicuous role in modern chemical synthesis and green chemistry. Therefore, when designing a chemical reaction, choosing and or preparing powerful and environmentally benign simple catalysts or complicated catalytic systems for an acceleration of the chemical reaction is a pivotal part of work for synthetic chemists. Chitosan, as a biocompatible and biodegradable pseudo-natural polysaccharide is one of the excellent choices for the preparation of suitable catalytic systems due to its unique properties. In this review paper, every effort has been made to cover all research articles in the field of one-pot synthesis of heterocyclic frameworks in the presence of chitosan-based catalytic systems, which were published roughly by the first quarter of 2020. It is hoped that this review paper can be a little help to synthetic scientists, methodologists, and catalyst designers, both on the laboratory and industrial scales.

The Application of Biomass-Based Catalytic Materials in the Synthesis of Cyclic Carbonates from CO2 and Epoxides

The synthesis of cyclic carbonates from carbon dioxide (CO2) and epoxides is a 100% atom economical reaction and an attractive pathway for CO2 utilisation. Because CO2 is a thermodynamically stable molecule, the use of catalysts is mandatory in reducing the activation energy of the CO2 conversion. Considering environmental compatibility and the high-efficiency catalytic conversion of CO2, there is the strong need to develop green catalysts. Biomass-based catalysts, a type of renewable resource, have attracted considerable attention due to their unique properties-non-toxic, low-cost, pollution-free, etc. In this review, recent advances in the development of biomass-based catalysts for the synthesis of cyclic carbonates by CO2 and epoxides coupling are summarized and discussed in detail. The effect of biomass-based catalysts, functional groups, reaction conditions, and co-catalysts on the catalytic efficiency and selectivity of synthesizing cyclic carbonates process is discussed. We intend to provide a comprehensive understanding of recent experimental and theoretical progress of CO2 and epoxides coupling reaction and pave the way for both CO2 conversion and biomass unitization.

Quaternized Polysulfone Cross-Linked N,N-Dimethyl Chitosan-Based Anion-Conducting Membranes

Anion-conducting membranes were obtained following the cross-linking of 1,4-diazoniabicycle[2.2.2]octane functionalized-polysulfone with N,N-dimethyl chitosan (DMC). The ionic conductivity of the composite membranes was controlled by the amount of DMC. The influence of the amount of DMC on water uptake, swelling ratio, and ionic conductivity of the obtained membrane was studied. The membrane with 2 wt% DMC exhibited an ionic conductivity of 54 mS/cm and 94 mS/cm at 25 °C and 70 °C, respectively. The membrane showed good dimensional stability under hydrated conditions. A urea/O₂ fuel cell, built using the composite membrane, exhibited a peak power density of 4.4 mW/cm² with a current density of 16.22 mA/cm² at 70 °C.

Catalytic coupling of CO2 with epoxide by metal macrocycles functionalized with imidazolium bromide: insights into the mechanism and activity regulation from density functional calculations

The cycloaddition of CO2 and epoxide catalysed by metalloporphyrins (IL-M(TPP)) and metallocorroles (IL-M(Cor)) containing imidazolium bromide has been studied extensively using density functional theory calculations. Possible mechanisms and catalytic effects of the hydrogen substitution on the imidazolium ring and the metal replacement in the macrocycles have been investigated. The results showed that the synergistic effect between the electrophilic metal centre and the flexible nucleophilic Br- of the bifunctional catalysts was responsible for the high catalytic activity. The coupling reaction of CO2 and ethylene oxide catalysed by IL-Al(Cor) experiences a free energy barrier of 9.7 kcal mol-1 for the rate-determining ring-opening step, which is much lower than ∼20 kcal mol-1 for that catalysed by IL-Zn(TPP). The metallocorrole-based bifunctional catalyst seems quite promising for the catalytic conversion of CO2 into five-membered heterocyclic compounds.

Novel and effective strategy of dual bis(trifluoromethylsulfonyl)imide imidazolium ionic liquid immobilized on periodic mesoporous organosilica for greener cycloaddition of carbon dioxide to epoxides

Novel periodic mesoporous organosilica supported ionic liquids were prepared, characterized and evaluated as catalysts for cycloaddition of CO₂ to epoxides.

Scorpionate Catalysts for Coupling CO2 and Epoxides to Cyclic Carbonates: A Rational Design Approach for Organocatalysts

Novel scorpionate-type organocatalysts capable of effectively coupling carbon dioxide and epoxides under mild conditions to afford cyclic propylene carbonates were developed. On the basis of a combined experimental and computational study, a precise mechanistic proposal was developed and rational optimization strategies were identified. The epoxide ring-opening, which requires an iodide as a nucleophile, was enhanced by utilizing an immonium functionality that can form an ion pair with iodide, making the ring-opening process intramolecular. The CO₂ activation and cyclic carbonate formation were catalyzed by the concerted action of two hydrogen bonds originating from two phenolic groups placed at the claw positions of the scorpionate scaffold. Electronic tuning of the hydrogen bond donors allowed to identify a new catalyst that can deliver >90% yield for a variety of epoxide substrates within 7 h at room temperature under a CO₂ pressure of only 10 bar, and is highly recyclable.

Chitosan Derivatives: Introducing New Functionalities with a Controlled Molecular Architecture for Innovative Materials

The functionalization of polymeric substances is of great interest for the development of innovative materials for advanced applications. For many decades, the functionalization of chitosan has been a convenient way to improve its properties with the aim of preparing new materials with specialized characteristics. In the present review, we summarize the latest methods for the modification and derivatization of chitin and chitosan under experimental conditions, which allow a control over the macromolecular architecture. This is because an understanding of the interdependence between chemical structure and properties is an important condition for proposing innovative materials. New advances in methods and strategies of functionalization such as the click chemistry approach, grafting onto copolymerization, coupling with cyclodextrins, and reactions in ionic liquids are discussed.