Efficient Synthesis and Iodine-Functionalization of Pyrazoles via KIO3/PhSeSePh System under Acidic Conditions

This manuscript reports a novel method for the direct iodination of the C-4 pyrazole ring generated in situ by the reaction of 1,1,3,3-tetramethoxypropane and various hydrazines. In this approach, potassium iodate (KIO3) is used as the iodinating agent and (PhSe)2 is used as catalysts under acidic conditions. This protocol provides a convenient method for the efficient synthesis of 4-iodo-1-aryl-1H-pyrazoles, valuable intermediates for several different coupling reactions.

A Prompt Study on Recent Advances in the Development Of Colorimetric and Fluorescent Chemosensors for "Nanomolar Detection" of Biologically Important Analytes

Fluorescent and colorimetric chemosensors for selective detection of various biologically important analytes have been widely applied in different areas such as biology, physiology, pharmacology, and environmental sciences. The research area based on fluorescent chemosensors has been in existence for about 150 years with the development of large number of fluorescent chemosensors for selective detection of cations as metal ions, anions, reactive species, neutral molecules and different gases etc. Despite the progress made in this field, several problems and challenges still exist. The most important part of sensing is limit of detection (LOD) which is the lowest concentration that can be measured (detected) with statistical significance by means of a given analytical procedure. Although there are so many reports available for detection of millimolar to micromolar range but the development of chemosensors for the detection of analytes in nanomolar range is still a challenging task. Therefore, in our current review we have focused the history and a general overview of the development in the research of fluorescent sensors for selective detection of various analytes at nanomolar level only. The basic principles involved in the design of chemosensors for specific analytes, binding mode, photophysical properties and various directions are also covered here. Summary of physiochemical properties, mechanistic view and type of different chemosensors has been demonstrated concisely in the tabular forms.

Multicomponent synthesis of chromophores – The one-pot approach to functional π-systems

Multicomponent reactions, conducted in a domino, sequential or consecutive fashion, have not only considerably enhanced synthetic efficiency as one-pot methodology, but they have also become an enabling tool for interdisciplinary research. The highly diversity-oriented nature of the synthetic concept allows accessing huge structural and functional space. Already some decades ago this has been recognized for life sciences, in particular, lead finding and exploration in pharma and agricultural chemistry. The quest for novel functional materials has also opened the field for diversity-oriented syntheses of functional π-systems, i.e. dyes for photonic and electronic applications based on their electronic properties. This review summarizes recent developments in MCR syntheses of functional chromophores highlighting syntheses following either the framework forming scaffold approach by establishing connectivity between chromophores or the chromogenic chromophore approach by de novo formation of chromophore of interest. Both approaches warrant rapid access to molecular functional π-systems, i.e. chromophores, fluorophores, and electrophores for various applications.

Synthesis and Antiproliferative Activity of 2,4,6,7-Tetrasubstituted-2H-pyrazolo[4,3-c]pyridines

A library of 2,4,6,7-tetrasubstituted-2H-pyrazolo[4,3-c]pyridines was prepared from easily accessible 1-phenyl-3-(2-phenylethynyl)-1H-pyrazole-4-carbaldehyde via an iodine-mediated electrophilic cyclization of intermediate 4-(azidomethyl)-1-phenyl-3-(phenylethynyl)-1H-pyrazoles to 7-iodo-2,6-diphenyl-2H-pyrazolo[4,3-c]pyridines followed by Suzuki cross-couplings with various boronic acids and alkylation reactions. The compounds were evaluated for their antiproliferative activity against K562, MV4-11, and MCF-7 cancer cell lines. The most potent compounds displayed low micromolar GI50 values. 4-(2,6-Diphenyl-2H-pyrazolo[4,3-c]pyridin-7-yl)phenol proved to be the most active, induced poly(ADP-ribose) polymerase 1 (PARP-1) cleavage, activated the initiator enzyme of apoptotic cascade caspase 9, induced a fragmentation of microtubule-associated protein 1-light chain 3 (LC3), and reduced the expression levels of proliferating cell nuclear antigen (PCNA). The obtained results suggest a complex action of 4-(2,6-diphenyl-2H-pyrazolo[4,3-c]pyridin-7-yl)phenol that combines antiproliferative effects with the induction of cell death. Moreover, investigations of the fluorescence properties of the final compounds revealed 7-(4-methoxyphenyl)-2,6-diphenyl-2H-pyrazolo[4,3-c]pyridine as the most potent pH indicator that enables both fluorescence intensity-based and ratiometric pH sensing.

Recent progress in chemosensors based on pyrazole derivatives

Colorimetric and fluorescent probes based on small organic molecules have become important tools in modern biology because they provide dynamic information concerning the localization and quantity of the molecules and ions of interest without the need for genetic engineering of the sample. In the past five years, these probes for ions and molecules have attracted great attention because of their biological, environmental and industrial significance combined with the simplicity and high sensitivity of absorption and fluorescence techniques. Moreover, pyrazole derivatives display a number of remarkable photophysical properties and wide synthetic versatility superior to those of other broadly used scaffolds. This review provides an overview of the recent (2016-2020) findings on chemosensors containing pyrazole derivatives (pyrazoles, pyrazolines and fused pyrazoles). The discussion focuses on the design and physicochemical properties of chemosensors in order to realize their full potential for practical applications in environmental and biological monitoring (sensing of metal ions, anions, explosives, and biomolecules). We also present our conclusions and outlook for the future.

A simple and sensitive fluorescent sensor platform for Al3+ sensing in aqueous media and monitoring through combined PET and ESIPT mechanisms: practical applications in drinking water and bio-imaging

A novel hydrazide-based probe was designed and prepared as a fluorogenic “turn-on” sensor for Al³⁺ sensing in aqueous media.

Exploration of fluorescence behavior of an imidazolium-based chemosensor in solution and in the solid state and its turn-on response to Al3+ in pure aqueous medium

An imidazolium-based quinoline framework is constructed, and its fluorescence behaviour studies with fluorescence turn-on chemosensory response to the selective detection of Al³⁺ in aqueous medium are discussed in detail.

Synthesis, Photophysical Properties, and Metal-Ion Recognition Studies of Fluoroionophores Based on 1-(2-Pyridyl)-4-Styrylpyrazoles

A convenient access toward novel fluoroionophores based on 1-(2-pyridyl)-4-styrylpyrazoles (PSPs) substituted at position 3 with donor or acceptor aryl groups is reported. The synthesis proceeds in two steps: the first one via Wittig olefination of the appropriate 4-formylpyrazole and then Mizoroki-Heck coupling to yield the desired products in an overall yield of up to 69%. Photophysical properties of products (4-styryl) and their intermediates (4-vinyl) were explored, finding that they have strong blue-light emission with high quantum yields (up to 66%) due to ICT phenomena. The 3-phenyl PSP was studied as a turn-off fluorescent probe in metal ion sensing, finding a high selectivity to Hg2+ (LOD = 3.1 × 10-7 M) in a process that could be reversed with ethylenediamine. The sensing mechanism and binding mode of the ligand to Hg2+ were established by HRMS analysis and 1H NMR titration tests.

Ligands dissociation induced gold nanoparticles aggregation for colorimetric Al3+ detection

Aluminum is a very important analyte, and developing biosensors for aluminum is an important analytical task. In this work, we report a novel mechanism to design colorimetric sensor based on gold nanoparticles (AuNPs). The AuNPs were prepared by reducing HAuCl₄ using catechols, and the resulting AuNPs can be directly adapted for Al³⁺ detection without any post-modifications, showing high sensitivity and selectivity against other metal ions. Interestingly, our mechanistic studies revealed that Al³⁺-induced AuNPs aggregation was not due to the formation of interparticle crosslinks that refers to the design principle of most AuNPs-based colorimetric sensors reported before. But rather, Al³⁺ competitively coordinated with the capping ligands on AuNPs surface through the formation of stable Al-O bond, which dissociated these ligands from AuNPs surface. As a result, the AuNPs aggregated due to the loss of surface stabilizers. Based on this mechanism, several catechols, including pyrocatechol (PC), 3-(3,4-dihydroxyphenyl) propionic acid (DHCA), levodopa (LDA) and dopamine (DA), were used as reductant to prepare AuNPs for Al³⁺ sensing, and the AuNPs prepared by DA (AuNPs/DA) displayed the highest sensitivity, with detection limit of 0.81 μM. The sensor was then tested for Al content analysis in river water and food samples, and the results supported its practical applications. Importantly, this work expands the design principles for colorimetric sensors by using AuNPs.

Turn-On Fluorescent Sensors for the Selective Detection of Al3+ (and Ga3+) and PPi Ions

Rationally designed multiple hydroxyl-group-based chemosensors L1-L4 containing arene-based fluorophores are presented for the selective detection of Al³⁺ and Ga³⁺ ions. Changes in the absorption and emission spectra of L1-L4 in ethanol were easily observable upon the addition of Al³⁺ and Ga³⁺ ions. Competitive binding studies, detection limits, and binding constants illustrate significant sensing abilities of these chemosensors with L4, showing the best results. The interaction of Al³⁺/Ga³⁺ ions with chemosensor L4 was investigated by fluorescence lifetime measurements, whereas Job's plot, high-resolution mass spectrometry, and ¹H NMR spectral titrations substantiated the stoichiometry between L4 and Al³⁺/Ga³⁺ ions. The solution-generated [L-M³⁺] species further detected pyrophosphate ion (PPi) by exhibiting emission enhancement and a visible color change. The binding of Al³⁺/Ga³⁺ ions with chemosensor L4 was further supported by density functional theory studies. Reversibility for the detection of Al³⁺/Ga³⁺ ions was achieved by utilizing a suitable proton source. The multiionic response, reversibility, and optical visualization of the present chemosensors make them ideal for practical applications for real samples, which have been illustrated by paper-strip as well as polystyrene film-based detection.

A coumarin derivative as a "turn-on" fluorescence probe toward Cd2+ in live cells

A novel coumarin-derived Schiff base fluorescence probe (CTB) has been successfully designed and synthesized through exploiting tris-(2-aminothyl)-amine moiety as a recognition unit for the highly selective and sensitive detection of Cd²⁺. It is based on CN isomerization and the photo-induced electron transfer (PET) mechanism. The investigation into the sensing processes showed that CTB exhibited an excellent selectivity for Cd²⁺. The sensitivity exceeded that of other competing metal ions, and had a high sensitivity, a detection limit of 1.16 × 10^-7 M with the association constants of 1.37 × 10¹¹ M^-2. The experiments including Job's plot, UV-Vis titration, ¹H NMR titration and ESI-MS spectrum established that the probe CTB binds to Cd²⁺ in a 1:2 ratio. Further studies also demonstrated that probe CTB can be successfully applied to the fluorescence imaging of Cd²⁺ in HepG-2 cells.

Aggregation-Induced Emission-Based Sensing Platform for Selective Detection of Zn2+ : Experimental and Theoretical Investigations

Fluorescent chemosensors with aggregation induced emission enhancement (AIEE) emerge as promising tools in the field of sensing materials. Herein, we report the design, synthesis and applicability of a Schiff base chemosensor 1-(benzo[1,3]dioxol-4-ylmethylene-hydrazonomethyl)-naphthalen-2-ol (Hbdhn) of AIE characteristics that exhibits highly effective and selective response towards Zn²⁺ . The sensing effect of Hbdhn was evaluated by means of absorption/emission spectra and corresponding underlying photophysical mechanisms were proposed based on extensive quantum-chemical (TD)DFT calculations. The aggregated states in different DMSO/H₂ O ratios and in a presence of Zn²⁺ were examined by fluorescence lifetime measurements, dynamic light scattering and scanning electron microscopy studies. The bioimaging abilities of Hbdhn were evaluated for Zn²⁺ in HepG2 cancer cells. The results demonstrate instant, stable in time and reproducible, colorimetric turn-on response with superb selectivity and sensitivity of Hbdhn towards Zn²⁺ , based on chelation enhanced fluorescence mechanism. AIEE improves further Hbdhn properties, leading to strong, long-lived fluorescence, with appearance of rod-like particles, in 90 % of water in DMSO and only 10 % of water in DMSO in the presence of Zn²⁺ . All these features combined with successful biomaging studies make Hbdhn one of the most promising candidate for practical applications among recently proposed related systems.

Aggregation-Induced Emission-Active Hydrazide-Based Probe: Selective Sensing of Al3+, HF2 -, and Nitro Explosives

(E)-N'-((2-Hydroxynaphthalen-1-yl)methylene)picolinohydrazide (H-PNAP) shows aggregation-induced emission (AIE) strictly in a 90% water/MeOH (v/v) mixture at 540 nm, and the solid-state emission is blue-shifted to 509 nm upon excitation at 400 nm. The AIE activity of H-PNAP is selectively quenched by 2,4,6-trinitrophenol (TNP) and 2,4-dinitrophenol (DNP) out of different nitroaromatic compounds with a limit of detection (LOD) of 7.79 × 10-7 and 9.08 × 10-7 M, respectively. The probe is nonemissive in aqueous medium (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid, HEPES buffer, pH 7.2); however, it shows a strong emission to Al3+ (λem, 490 nm) in the presence of 17 other biological metal ions, and the LOD is 2.09 nM which is far below the WHO recommended value (7.41 mM). The emission of the [Al(PNAP)(NO3)2] complex is quenched by HF2 - (F- and PO4 3- are weak quencher), and the LOD is as low as 15 nM. The probable mechanism of the sensing feature of the probe has been authenticated by 1H nuclear magnetic resonance titration, mass spectrometry, Fourier transform infrared spectroscopy, Benesi-Hildebrand plot, and Job's plot in each case. The probe has some practical applications such as recovery of Al3+ from the drinking water sample, construction of the INHIBIT logic gate, and detection kits for Al3+ and TNP/DNP by simple paper test strips. The probe, H-PNAP, has successfully been applied to the detection of intracellular Al3+ and HF2 - ions in the human breast cancer cell, MDA-MB-468.

A quinoxaline-diaminomaleonitrile conjugate system for colorimetric detection of Cu2+ in 100% aqueous medium: observation of aldehyde to acid transformation

In this work, we have strategically incorporated a quinoxaline derivative and a diaminomaleonitrile moiety to construct a chemosensor, 2-amino-3-[(quinoxalin-2-ylmethylene)-amino]-but-2-enedinitrile (H2qm). The notable feature of this strategy is to generate a highly conjugated Schiff base platform with interesting binding properties. Remarkably, H2qm exhibited a visual sensing ability towards Cu2+ in 100% aqueous medium. The effectiveness of the chemosensor has been demonstrated by utilizing it to determine the Cu2+ concentration in real samples. Interestingly, the reaction between H2qm and Cu(ClO4)2·6H2O in DMSO yielded a quinoxaline-2-carboxylic acid based compound and single crystal X-ray diffraction analysis unveiled the resulting structure as [(qa)2Cu(H2O)2] (Hqa = quinoxaline-2-carboxylic acid).

A novel coumarin-based fluorescence chemosensor for Al3+ and its application in cell imaging

As an efficient turn-on fluorescent chemosensor for Al³⁺, a new coumarin derivative (CND) has been designed and synthesized by the condensation of 8-formyl-7-hydroxycoumarin with niacin hydrazide. The spectroscopic studies revealed that the sensor CND exhibited a remarkable fluorescence enhancement towards Al³⁺ with high selectivity and sensitivity in EtOH-HEPES (95:5, v/v, pH = 7.40), which was attributed to the photoinduced electron transfer (PET) and CN isomerization mechanism. Fluorescence titration calculations data showed that the detection limit and the association constants of CND for Al³⁺ were found to be 2.51 × 10^-7 M and 9.64 × 10⁴ M^-1, respectively. The results of experiments, including Job's plot, ¹H NMR titration and ESI-MS, revealed that the stoichiometric binding between CND and Al³⁺ was 1:1. The investigations of the pH dependency of CND for Al³⁺ detection, and the cell imaging suggested the sensor CND could be promisingly applied for the recognition of Al³⁺ in biological cells.

Dihydroindeno[1,2-b]pyrroles: new Al3+selective off–on chemosensors for bio-imaging in living HepG2 cells

An approach for the expeditious synthesis of a new Al³⁺-selective turn-on dihydroindeno[1,2-b]pyrrole probe under environmentally benevolent conditions and its bio-imaging studies on HepG2 cell.