Bimetallic CoCu nanoparticles anchored on COF/SWCNT for electrochemical detection of carbendazim

Carbendazim (CBZ) is a widespread fungicide used in crop protection, but the CBZ residues in drinking water, fruits, and vegetables can also cause adverse impacts on public health due to direct exposure. In this paper, a ternary synergistic composite of bimetallic CoCu nanoparticles anchored on covalent organic framework/single-walled carbon nanotube (CoCu/COF/SWCNT) was prepared and further applied as an electrochemical sensing platform for detecting CBZ. The sensor showed a sensitive response performance toward CBZ oxidation, as a result of the enhanced charge transfer ability, large electrochemically active surface area, and high electro-catalytic activity from the rational integration of the ternary components in CoCu/COF/SWCNT. Under the optimal conditions, the proposed sensor exhibited a detection range of 0.001 to 10 μM and a limit detection of 0.65 nM for CBZ detection. In addition, the sensor displayed practical feasibility for the determination of CBZ in water and pear samples with a recovery of 96.1 % to 102.1 %.

Hollow Cu2-xSe-based nanocatalysts for combined photothermal and chemodynamic therapy in the second near-infrared window

Chemodynamic therapy (CDT) and photothermal therapy (PTT) have gained popularity due to their non-invasive characteristics and satisfying therapeutic expectations. A Cu-based nanomaterial serving as a Fenton-like nanocatalyst for CDT together with a photothermal agent for simultaneous PTT seems to be a powerful strategy. In this work, the morphological effect of Cu2-xSe nanoparticles on CDT and PTT was systematically investigated. In particular, the hollow octahedral Cu2-xSe nanoparticles exhibited higher photothermal and chemodynamic performance than that of spherical or cubic Cu2-xSe nanoparticles in the second near-infrared (NIR-II) window. In addition, the octahedral Cu2-xSe nanoparticles were further loaded with the autophagy inhibitor chloroquine (CQ) and connected with the targeting neuropeptide Y ligand, and shown to work as a novel therapeutic platform (Cu2-xSe@CQ@NPY), holding an immense potential to achieve synergetic enhancement of CDT/PTT with a positive therapeutic outcome for breast cancer.

In-Situ-Grown Cu Dendrites Plasmonically Enhance Electrocatalytic Hydrogen Evolution on Facet-Engineered Cu2 O

Herein, facet-engineered Cu2 O nanostructures are synthesized by wet chemical methods for electrocatalytic HER, and it is found that the octahedral Cu2 O nanostructures with exposed crystal planes of (111) (O-Cu2 O) has the best hydrogen evolution performance. Operando Raman spectroscopy and ex-situ characterization techniques showed that Cu2 O is reduced during HER, in which Cu dendrites are grown on the surface of the Cu2 O nanostructures, resulting in the better HER performance of O-Cu2 O after HER (O-Cu2 O-A) compared with that of the as-prepared O-Cu2 O. Under illumination, the onset potential of O-Cu2 O-A is ca. 52 mV positive than that of O-Cu2 O, which is induced by the plasmon-activated electrochemical system consisting of Cu2 O and the in-situ generated Cu dendrites. Incident photon-to-current efficiency (IPCE) measurements and the simulated UV-Vis spectrum demonstrate the hot electron injection (HEI) from Cu dendrites to Cu2 O. Ab initio nonadiabatic molecular dynamics (NAMD) simulations revealed the transfer of photogenerated electrons (27 fs) from Cu dendrites to Cu2 O nanostructures is faster than electron relaxation (170 fs), enhancing its surface plasmons activity, and the HEI of Cu dendrites increases the charge density of Cu2 O. These make the energy level of the catalyst be closer to that of H+ /H2 , evidenced by the plasmon-enhanced HER electrocatalytic activity.

Study on the oriented self-assembly of cuprous oxide micro-nano cubes and its application as a non-enzymatic glucose sensor

Herein, cuprous oxide (Cu₂O) micro-nano cubes were successfully synthesized via a seed-medium process. It is worth noting that the microcubes were formed by oriented self-assembly of 2 × 2 × 2 nanocubes. The oriented self-assembly process can be effective controlled by simply adjusting the concentration of reactants. What's more, the obtained samples were applied for non-enzymatic glucose detection and exhibited excellent performance. The Cu₂O nanocubes obtained at the highest concentration exhibited the highest sensitivity (2864 μAmM^-1cm^-2), while the Cu₂O microcubes obtained at the lowest concentration shared the widest linear range (up to 10.65 mM) and lowest limit of detection (LOD, 0.87 μΜ). The acceptable anti-interference ability, excellent stability together with the practical application ability make our obtained electrodes a new strategy for monitoring glucose in biological and food samples.

Engineering Active Sites of Gold-Cuprous Oxide Catalysts for Electrocatalytic Oxygen Reduction Reaction

Understanding how the catalyst morphology influences surface sites is crucial for designing active and stable catalysts and electrocatalysts. We here report a new approach to this understanding by decorating gold (Au) nanoparticles on the surface of cuprous oxides (Cu₂O) with three different shape morphologies (spheres, cubes, and petals). The Au-Cu₂O particles are dispersed onto carbon nanotube (CNT) matrix with high surface area, stability, and conductivity for oxygen reduction reaction. A clear morphology-dependent enhancement of the electrocatalytic activity is revealed. Oxygenated gold species (AuO^-) are found to coexist with Au⁰ on the cube and petal catalysts, whereas only Au⁰ species are present on the sphere catalyst. The AuO^- species function effectively as active sites, resulting in the improved catalytic performance by changing the reaction mechanism. The enhanced catalytic performance of the petal-shaped catalyst in terms of onset potential, half-wave potential, diffusion-limited current density, and stability is closely associated with the presence of the most abundant AuO^- species on its surface. Highly active AuO^- species are identified on the surface of the catalysts as a result of the unique structural characteristics, which is attributed to the structural origin of high activity and stability. This insight constitutes the basis for assessing the detailed correlation between the morphology and the electrocatalytic properties of the nanocomposite catalysts, which has implications for the design of surface-active sites on metal/metal oxide electrocatalysts.

The dependence of Cu2O morphology on different surfactants and its application for non-enzymatic glucose detection

Herein, the Cu₂O yolk-shell nanospheres, nanocubes and microcubes were successfully prepared by a simple seed-medium process. The formation of the Cu₂O yolk-shell nanospheres can be attributed to the self-assembly process caused by the introduction of the seed medium. The formation mechanism of our obtained Cu₂O yolk-shell nanospheres and the dependence of Cu₂O morphology on different surfactants have been studied. The obtained samples were applied in the field of non-enzymatic glucose detection. The electrochemical response characteristics of the modified electrodes toward glucose were investigated by cyclic voltammetry (CV) and chronoamperometry (CA). The electrode modified with C-Cu₂O (obtained by using CTAB as surfactant) shared the highest sensitivity of 3123 μAmM^-1 cm^-2, whereas, the electrode modified with S-Cu₂O (obtained by using SDBS as surfactant) exhibited the lowest LOD of 0.87 μM and the widest linear range of 0.05-10.65 mM. All obtained sensors showed fast response to the addition of glucose. The obtained electrodes showed better responses to glucose than other coexisting interferences, indicating that the obtained electrodes had the acceptable selectivity to glucose. In addition, the stability for 5 consecutive weeks had also been studied and exhibited satisfactory results. The obtained electrode was also used to detect the glucose content in real serum. The acceptable selectivity, stability together with the excellent sensing ability in real serum make the obtained electrodes a potential for practical applications.

Group 13 Lewis acid catalyzed synthesis of metal oxide nanocrystals via hydroxide transmetallation

A new transmetallation approach is described for the synthesis of metal oxide nanocrystals (NCs). Typically, the synthesis of metal oxide NCs in oleyl alcohol is driven by metal-based esterification catalysis with oleic acid to produce oleyl oleate ester and M-OH monomers, which then condense to form MxOy solids. Here we show that the synthesis of Cu2O NCs by this method is limited by the catalytic ability of copper to drive esterification and thus produce Cu+-OH monomers. However, inclusion of 1-15 mol% of a group 13 cation (Al3+, Ga3+, or In3+) results in efficient synthesis of Cu2O NCs and exhibits size/morphology control based on the nature of M3+. Using a continuous-injection procedure where the copper precursor (Cu2+-oleate) and catalyst (M3+-oleate) are injected into oleyl alcohol at a controlled rate, we are able to monitor the reactivity of the precursor and M3+ catalyst using UV-visible and FTIR absorbance spectroscopies. These time-dependent measurements clearly show that M3+ catalysts drive esterification to produce M3+-OH species, which then undergo transmetallation of hydroxide ligands to generate Cu+-OH monomers required for Cu2O condensation. Ga3+ is found to be the "goldilocks" catalyst, producing NCs with the smallest size and a distinct cubic morphology not observed for any other group 13 metal. This is believed to be due to rapid transmetallation kinetics between Ga3+-OH and Cu+-oleate. These studies introduce a new mechanism for the synthesis of metal oxides where inherent catalysis by the parent metal (i.e. copper) can be circumvented with the use of a secondary catalyst to generate hydroxide ligands.

In Situ Growth of Ag Nanodots Decorated Cu2 O Porous Nanobelts Networks on Copper Foam for Efficient HER Electrocatalysis

Developing earth-abundant electrocatalysts for high-efficiency hydrogen evolution reaction (HER) has become one of the leading research frontiers in energy conversion. Here, the design and in situ growth of Ag nanodots decorated Cu₂ O porous nanobelts networks on Cu foam (denoted as Ag@Cu₂ O/CF) are carried out via a simple one-pot solution strategy at room temperature. Serving as self-supporting electrocatalysts, Ag@Cu₂ O porous nanobelts provide plentiful active sites, and the 3D hybrid foams provide fast transportation for electrolyte and short diffusion path for newly formed H₂ bubbles, which result in excellent electrocatalytic HER activity and long-term stability. Owing to the synergistic effect between Ag nanodots and Cu₂ O porous nanobelts and CF, the hybrid electrocatalyst exhibits a low Tafel slope of 58 mV dec^-1 , a small overpotential of 108 mV at 10 mA cm^-2 , and high durability for more than 20 h at a potential of 200 mV for HER in 1.0 mol L^-1 KOH solution.

Copper Nanoflower Assembled by Sub-2 nm Rough Nanowires for Efficient Oxygen Reduction Reaction: High Stability and Poison Resistance and Density Functional Calculations

The copper nanoflowers, assembled by sub-2 nm rough nanowires with high catalytic active (200) facets, are prepared by a prompt and simple method with cetyltrimethylammonium bromide (CTAB) as a capping agent. The CTAB plays a vital role in the synthesis process, whereas the copper nanorod arrays assembled by copper nanoparticles are obtained without CTAB. The copper nanoflowers are used as catalysts in oxygen reduction reactions and exhibit excellent electrocatalytic activity, which shows nearly the same activity compared with the commercial Pt/C catalyst, attributing to the nanoflower-exposed higher catalytic active (200) facets. Furthermore, the nanoflowers can avoid methanol-poison effect and show better long-term operation stability. The density functional theory was used to calculate the atom energy of Cu(100) facets and Cu(111) facets. Both of O₂ dissociation and H₂O activation on the facets are very easy. However, the difference between Cu(100) facets and Cu(111) facets is the adsorption and dissociation energy of O₂, and the adsorption and activation of oxygen molecule is much easier on Cu(100) facets than on Cu(111) facets because of the more open nature of (100) facets.

MOF-Derived Cu@Cu₂O Nanocatalyst for Oxygen Reduction Reaction and Cycloaddition Reaction

Research on the synthesis of nanomaterials using metal-organic frameworks (MOFs), which are characterized by multi-functionality and porosity, as precursors have been accomplished through various synthetic approaches. In this study, copper and copper oxide nanoparticles were fabricated within 30 min by a simple and rapid method involving the reduction of a copper(II)-containing MOF with sodium borohydride solution at room temperature. The obtained nanoparticles consist of a copper core and a copper oxide shell exhibited catalytic activity in the oxygen reduction reaction. The as-synthesized Cu@Cu₂O core-shell nanocatalyst exhibited an enhanced limit current density as well as onset potential in the electrocatalytic oxygen reduction reaction (ORR). Moreover, the nanoparticles exhibited good catalytic activity in the Huisgen cycloaddition of various substituted azides and alkynes under mild reaction conditions.

Simple and Practical Synthesis of Various New Nickel Boride-Based Nanocomposites and their Applications for the Green and Expeditious Reduction of Nitroarenes to Arylamines under Wet-Solvent-Free Mechanochemical Grinding

In this paper, we report a simple synthesis of four new nickel boride-based nanocomposites, namely Ni2B@ZrCl4, Ni2B@Cu2O, Ni2B@CuCl2 and Ni2B@FeCl3, from commercially available and cheap starting materials. All of the new Ni2B-based nanocomposites were well characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Further, the catalytic applications of these new nanocomposites were successfully evaluated in the wet-solvent-free reduction of aromatic nitro compounds to arylamines with sodium borohydride (NaBH4) at room temperature by a mechanochemical grinding technique. All the introduced catalytic systems provide excellent yields of arylamines in very short reaction times for a wide range of substrates. Also, recoverability and reusability of the new nanocomposites were investigated.