Inkjet fabrication of highly efficient luminescent Eu-doped ZrO2 nanostructures

Enrichment of Crystal Field Modification via Incorporation of Alkali K+ Ions in YVO4:Ho3+/Yb3+ Nanophosphor and Its Hybrid with Superparamagnetic Iron Oxide Nanoparticles for Optical, Advanced Anticounterfeiting, Uranyl Detection, and Hyperthermia Applications

In this work, we report a polyol route for easy synthesis of upconversion (UC) phosphor nanoparticles, YVO₄:Ho³⁺-Yb³⁺-K⁺, which enables large-scale production and enhancement of luminescence. Upon 980 nm laser excitation, the UC emission spectrum shows a sharp bright peak at ∼650 nm of Ho³⁺ ion; and the luminescence intensity increases twofold upon K⁺ codoping. Upon 300 nm excitation, the downconversion emission spectrum shows a broad peak in the 400-500 nm range (related to the charge transfer band of V-O) along with Ho³⁺ peaks. In addition, the polyethylene glycol-coated UC nanoparticles are highly water-dispersible and their hybrid with Fe₃O₄ nanoparticles shows magnetic-luminescence properties. A hyperthermia temperature is achieved from this hybrid. Both UC and hybrid nanoparticles show interesting security ink properties upon excitation by a 980 nm laser. The particles are invisible in normal light but visible upon 980 nm excitation and are useful in display devices, advanced anticounterfeiting purposes, and therapy of cancer via hyperthermia and bioimaging (since it shows red emission at ∼650 nm). Using UC nanoparticles, detection of uranyl down to 20 ppm has been achieved.

Dispersions of Zirconia Nanoparticles Close to the Phase Boundary of Surfactant-Free Ternary Mixtures

The achievement of a homogeneous dispersion of nanoparticles is of paramount importance in supporting their technological application. In wet processing, stable dispersions were largely obtained via surfactant or surface functionalization: although effective, the use of dispersant can alter, or even impair, the functional properties of the resulting nanostructured systems. Herein, we report a novel integrated modeling and experimental approach to obtain stable ZrO₂ nanoparticle (NP) dispersions at native dimensions (about 5 nm) in homogeneous ternary mixtures of solvents (i.e., water, ethanol, and 1,2-dichlorobenzene) without any further surface functionalization. A miscibility ternary diagram was computed exploiting the universal quasi-chemical functional-group activity coefficient (UNIFAC) model, which was then experimentally validated. Dynamic light scattering (DLS) on these mixtures highlights that nanometric structures, resembling nanoemulsion droplets, form close to the mixture two-phase boundary, with a size that depends on the ternary mixture composition. ZrO₂-NPs were then synthesized following a classic sol-gel approach and characterized by XRD and Raman spectroscopy. ZrO₂-NPs were dispersed in HCl and mixed with different mixtures of ethanol and 1,2-dichlorobenzene (DCB), obtaining homogeneous and stable dispersions. These dispersions were then studied by means of DLS as a function of DCB concentration, observing that the nanoparticles can be dispersed at their native dimensions when the mass fraction of DCB was lower than 60%, whereas the increase of the hydrophobic solvent leads to the NPs' agglomeration and sedimentation. The proposed approach not only offers specific guidelines for the design of ZrO₂-NPs dispersions in a ternary solvent mixture but can also be extended to other complex solvent mixtures in order to achieve stable dispersions of nanoparticles with no functionalization.

Optical interference-based sensors for the visual detection of nano-scale objects

In this study, we present a new concept for the simple visual detection of nano-scale objects in solutions. To achieve this goal, we developed chromogen-free interference-based sensors that provided a color visible reaction directly after the interaction of the analyte with the substrate. The effect is based on the strong optical interference occurring at the interface between the inkjet printed sol-gel titania film (a layer with high refractive index) and the adsorbed nano-sized objects (layer with low refractive index), which can be detected even with the naked eye. Herein, we have developed a synthetic strategy for the inkjet printing of interference sensors with controllable color change through thickness adjustment.

Upconversion Nanocomposite Materials With Designed Thermal Response for Optoelectronic Devices

Upconversion is a non-linear optical phenomenon by which low energy photons stimulate the emission of higher energy ones. Applications of upconversion materials are wide and cover diverse areas such as bio-imaging, solar cells, optical thermometry, displays, and anti-counterfeiting technologies, among others. When these materials are synthesized in the form of nanoparticles, the effect of temperature on the optical emissions depends critically on their size, creating new opportunities for innovation. However, it remains a challenge to achieve upconversion materials that can be easily processed for their direct application or for the manufacture of optoelectronic devices. In this work, we developed nanocomposite materials based on upconversion nanoparticles (UCNPs) dispersed in a polymer matrix of either polylactic acid or poly(methyl methacrylate). These materials can be processed from solution to form thin film multilayers, which can be patterned by applying soft-lithography techniques to produce the desired features in the micro-scale, and luminescent tracks when used as nanocomposite inks. The high homogeneity of the films, the uniform distribution of the UCNPs and the easygoing deposition process are the distinctive features of such an approach. Furthermore, the size-dependent thermal properties of UCNPs can be exploited by a proper formulation of the nanocomposites in order to develop materials with high thermal sensitivity and a thermochromic response. Here, we thus present different strategies for designing optical devices through patterning techniques, ink dispensing and multilayer stacking. By applying upconverting nanocomposites with unique thermal responses, local heating effects in designed nanostructures were observed.

Upconversion metal (Zr, Hf, and Ta) oxide aerogels

We report here a new feasible approach to produce upconversion luminescent metal oxide aerogels with high textural characteristics. Monolithic aerogels show upconversion luminescence converting near-infra red excitation into visible light emission.

Diphenylalanine-Based Microribbons for Piezoelectric Applications via Inkjet Printing

Peptide-based nanostructures are very promising for nanotechnological applications because of their excellent self-assembly properties, biological and chemical flexibility, and unique multifunctional performance. However, one of the limiting factors for the integration of peptide assemblies into functional devices is poor control of their alignment and other geometrical parameters required for device fabrication. In this work, we report a novel method for the controlled deposition of one of the representative self-assembled peptides-diphenylalanine (FF)-using a commercial inkjet printer. The initial FF solution, which has been shown to readily self-assemble into different structures such as nano- and microtubes and microrods, was modified to be used as an efficient ink for the printing of aligned FF-based structures. Furthermore, during the development of the suitable ink, we were able to produce a novel type of FF conformation with high piezoelectric response and excellent stability. By using this method, ribbonlike microcrystals based on FF could be formed and precisely patterned on different surfaces. Possible mechanisms of structure formation and piezoelectric effect in printed microribbons are discussed along with the possible applications.

Surface Micropatterning of Uniaxially Oriented Polyethylene Films Using Interference Holography for Strain Sensors

A new procedure is presented for direct generation of surface micropatterns on uniaxially oriented polyethylene (PE) films using interference holography with a nanosecond pulsed laser. An ultraviolet absorber, 2-(2H-benzotriazol-2-yl)-4,6-di-tert-pentylphenol (BZT) is incorporated into PE prior to stretching to generate absorption at the wavelength of the laser. Illumination with an interference pattern in the absorption band of BZT leads to an obvious height variation in the exposed regions and consequently relief gratings are generated. The height in the exposed regions is strongly dependent on the angle between the grating direction and the film orientation direction. This phenomenon is attributed to a combination of events such as melting, entropic contraction, recrystallization, thermal evaporation of BZT, and anisotropic thermal conductivity. It is shown that the relief height increases with increasing BZT concentration and exhibits a linear dependence on the energy dose above a certain threshold. Additionally, the oriented PE films with the surface micropatterns are explored for strain sensors. The results demonstrate that small strains below 10% are monitored accurately in tensile deformation of the micropatterned, oriented PE films which makes these films potentially useful as strain sensors.