Resistive switching mechanism of GeTe-Sb2Te3 interfacial phase change memory and topological properties of embedded two-dimensional states

Predicting Finite-Bias Tunneling Current Properties from Zero-Bias Features: The Frontier Orbital Bias Dependence at an Exemplar Case of DNA Nucleotides in a Nanogap

The electrical current properties of single-molecule sensing devices based on electronic (tunneling) transport strongly depend on molecule frontier orbital energy, spatial distribution, and position with respect to the electrodes. Here, we present an analysis of the bias dependence of molecule frontier orbital properties at an exemplar case of DNA nucleotides in the gap between H-terminated (3, 3) carbon nanotube (CNT) electrodes and its relation to transversal current rectification. The electronic transport properties of this simple single-molecule device, whose characteristic is the absence of covalent bonding between electrodes and a molecule between them, were obtained using density functional theory and non-equilibrium Green's functions. As in our previous studies, we could observe two distinct bias dependences of frontier orbital energies: the so-called strong and the weak pinning regimes. We established a procedure, from zero-bias and empty-gap characteristics, to estimate finite-bias electronic tunneling transport properties, i.e., whether the molecular junction would operate in the weak or strong pinning regime. We also discuss the use of the zero-bias approximation to calculate electric current properties at finite bias. The results from this work could have an impact on the design of new single-molecule applications that use tunneling current or rectification applicable in high-sensitivity sensors, protein, or DNA sequencing.

Periodic nanostructures: preparation, properties and applications

Periodic nanostructures, a group of nanomaterials consisting of single or multiple nano units/components periodically arranged into ordered patterns (e.g., vertical and lateral superlattices), have attracted tremendous attention in recent years due to their extraordinary physical and chemical properties that offer a huge potential for a multitude of applications in energy conversion, electronic and optoelectronic applications. Recent advances in the preparation strategies of periodic nanostructures, including self-assembly, epitaxy, and exfoliation, have paved the way to rationally modulate their ferroelectricity, superconductivity, band gap and many other physical and chemical properties. For example, the recent discovery of superconductivity observed in "magic-angle" graphene superlattices has sparked intensive studies in new ways, creating superlattices in twisted 2D materials. Recent development in the various state-of-the-art preparations of periodic nanostructures has created many new ideas and findings, warranting a timely review. In this review, we discuss the current advances of periodic nanostructures, including their preparation strategies, property modulations and various applications.

A Phase-Change Mechanism of GST-SL Based Superlattices upon Sb Flipping

Reversible phase-change behaviors of Ge–Sb–Te based superlattices (GST-SL) were studied by ab initio molecular dynamics (AIMD) simulations based on three models containing Ge/Sb intermixing, namely the Petrov-mix, Ferro-mix, and Kooi-mix models. The flipping behavior of Sb atoms was found in all the three GST-SL models in the melting process. Among them the Kooi-mix model exhibited the best stability, and the analyses of bond length distribution and electron localization function provided a better explanation on the phase transition of GST-SL. Finally, we proposed a fast switching model for GST-SL based on Sb flipping.

Probing embedded topological modes in bulk-like GeTe-Sb2Te3 heterostructures

The interface between topological and normal insulators hosts metallic states that appear due to the change in band topology. While topological states at a surface, i.e., a topological insulator-air/vacuum interface, have been studied intensely, topological states at a solid-solid interface have been less explored. Here we combine experiment and theory to study such embedded topological states (ETSs) in heterostructures of GeTe (normal insulator) and \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {Sb}_2$$\end{document}Sb2\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\hbox {Te}_3$$\end{document}Te3 (topological insulator). We analyse their dependence on the interface and their confinement characteristics. First, to characterise the heterostructures, we evaluate the GeTe-Sb\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_2$$\end{document}2Te\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$_3$$\end{document}3 band offset using X-ray photoemission spectroscopy, and chart the elemental composition using atom probe tomography. We then use first-principles to independently calculate the band offset and also parametrise the band structure within a four-band continuum model. Our analysis reveals, strikingly, that under realistic conditions, the interfacial topological modes are delocalised over many lattice spacings. In addition, the first-principles calculations indicate that the ETSs are relatively robust to disorder and this may have practical ramifications. Our study provides insights into how to manipulate topological modes in heterostructures and also provides a basis for recent experimental findings [Nguyen et al. Sci. Rep. 6, 27716 (2016)] where ETSs were seen to couple over thick layers.

A first-principles study of the switching mechanism in GeTe/InSbTe superlattices

Interfacial Phase Change Memories (iPCMs) based on (GeTe)₂/Sb₂Te₃ superlattices have been proposed as an alternative candidate to conventional PCMs for the realization of memory devices with superior switching properties. The switching mechanism was proposed to involve a crystalline-to-crystalline structural transition associated with a rearrangement of the stacking sequence of the GeTe bilayers. Density functional theory (DFT) calculations showed that such rearrangement could be achieved by means of a two-step process with an activation barrier for the flipping of Ge and Te atoms which is sensitive to the biaxial strain acting on GeTe bilayers. Within this picture, strain-engineering of GeTe bilayers in the GeTe-chalcogenide superlattice can be exploited to further improve the iPCM switching performance. In this work, we study GeTe-InSbTe superlattices with different compositions by means of DFT, aiming at exploiting the large mismatch (3.8%) in the in-plane lattice parameter between GeTe and In₃SbTe₂ to reduce the activation barrier for the switching with respect to the (GeTe)₂-Sb₂Te₃ superlattice.

A layered Ge2Sb2Te5 phase change material

In this study, a universal Ge₂Sb₂Te₅ phase change material was sputtered to obtain a layered structure. The crystalline phase of this material was prepared by annealing. SEM (scanning electron microscopy) and HRTEM (high-resolution transmission electron microscopy) images give confirmed that the sputtered Ge₂Sb₂Te₅ thin film in crystalline phase has multiple layers. The layers can be exfoliated by acetone. The thicknesses of acetone-exfoliated crystalline and amorphous flakes are approx. 10-60 nm.

In situ observations of the reversible vacancy ordering process in van der Waals-bonded Ge-Sb-Te thin films and GeTe-Sb2Te3 superlattices

Chalcogenide-based thin films are employed in data storage and memory technology whereas van der Waals-bonded layered chalcogenide heterostructures are considered to be a main contender for memory devices with low power consumption. The reduction of switching energy is due to the lowering of entropic losses governed by the restricted motion of atoms in one dimension within the crystalline states. The investigations of switching mechanisms in such superlattices have recently attracted much attention and the proposed models are still under debate. This is partially due to the lack of direct observation of atomic scale processes, which might occur in these chalcogenide systems. This work reports direct, nanoscale observations of the order-disorder processes in van der Waals bonded Ge-Sb-Te thin films and GeTe-Sb2Te3-based superlattices using in situ experiments inside an aberration-corrected transmission electron microscope. The findings reveal a reversible self-assembled reconfiguration of the structural order in these materials. This process is associated with the ordering of randomly distributed vacancies within the studied materials into ordered vacancy layers and with readjustment of the lattice plane distances within the newly formed layered structures, indicating the high flexibility of these layered chalcogenide-based systems. Thus, the ordering process results in the formation of vacancy-bonded building blocks intercalated within van der Waals-bonded units. Moreover, vacancy-bonded building blocks can be reconfigured to the initial structure under the influence of an electron beam, while in situ exposure of the recovered layers to a targeted electron beam leads to the reverse process. Overall, the outcomes provide new insights into local structure and switching mechanism in chalcogenide superlattices.

Structural transition pathway and bipolar switching of the GeTe-Sb2Te3 superlattice as interfacial phase-change memory

We investigated the resistive switching mechanism between the high-resistance state (HRS) and the low-resistance state (LRS) of the GeTe-Sb2Te3 (GST) superlattice. First-principles calculations were performed to identify the structural transition pathway and to evaluate the current-voltage (I-V) characteristics of the GST device cell. After determining the atomistic structures of the stable structural phases of the GST superlattice, we found the structural transition pathways and the transition states of possible elementary processes in the device, which consisted of a thin film of GST superlattice and semi-infinite electrodes. The calculations of the I-V characteristics were examined to identify the HRS and the LRS, and the results reasonably agreed with those of our previous study (H. Nakamura, et al., Nanoscale, 2017, 9, 9286). The calculated HRS/LRS and analysis of the transition states of the pathways suggest that a bipolar switching mode dominated by the electric-field effect is possible.

Compositional tuning in sputter-grown highly-oriented Bi-Te films and their optical and electronic structures

Growth of Bi-Te films by helicon-wave magnetron sputtering is systematically explored using alloy targets. The film compositions obtained are found to strongly depend on both the sputtering and antenna-coil powers. The obtainable film compositions range from Bi₅₅Te₄₅ to Bi₄₃Te₅₇ when a Bi₂Te₃ alloy target is used, and from Bi₄₂Te₅₈ to Bi₄₀Te₆₀ (Bi₂Te₃) for a Te-rich Bi₃₀Te₇₀ target. All films show strong orientation of the van der Waals layers (00l planes) parallel to the substrate. The atomic level stacking of Bi₂Te₃ quintuple and Bi bi-layers has been directly observed by high resolution transmission electron microscopy. Band structure simulations reveal that Bi-rich Bi₄Te₃ bulk is a zero band gap semimetal with a Dirac cone at the Gamma point when spin-orbit coupling is included. Optical measurements also confirm that the material has a zero band gap. The tunability of the composition and the topological insulating properties of the layers will enable the use of these materials for future electronics applications on an industrial scale.