Liquid exfoliation of 2D MoS2 nanosheets and their utilization as a label-free electrochemical immunoassay for subclinical ketosis

Biomedical Applications of an Ultra-Sensitive Surface Plasmon Resonance Biosensor Based on Smart MXene Quantum Dots (SMQDs)

In today's world, the use of biosensors occupies a special place in a variety of fields such as agriculture and industry. New biosensor technologies can identify biological compounds accurately and quickly. One of these technologies is the phenomenon of surface plasmon resonance (SPR) in the development of biosensors based on their optical properties, which allow for very sensitive and specific measurements of biomolecules without time delay. Therefore, various nanomaterials have been introduced for the development of SPR biosensors to achieve a high degree of selectivity and sensitivity. The diagnosis of deadly diseases such as cancer depends on the use of nanotechnology. Smart MXene quantum dots (SMQDs), a new class of nanomaterials that are developing at a rapid pace, are perfect for the development of SPR biosensors due to their many advantageous properties. Moreover, SMQDs are two-dimensional (2D) inorganic segments with a limited number of atomic layers that exhibit excellent properties such as high conductivity, plasmonic, and optical properties. Therefore, SMQDs, with their unique properties, are promising contenders for biomedicine, including cancer diagnosis/treatment, biological sensing/imaging, antigen detection, etc. In this review, SPR biosensors based on SMQDs applied in biomedical applications are discussed. To achieve this goal, an introduction to SPR, SPR biosensors, and SMQDs (including their structure, surface functional groups, synthesis, and properties) is given first; then, the fabrication of hybrid nanoparticles (NPs) based on SMQDs and the biomedical applications of SMQDs are discussed. In the next step, SPR biosensors based on SMQDs and advanced 2D SMQDs-based nanobiosensors as ultrasensitive detection tools are presented. This review proposes the use of SMQDs for the improvement of SPR biosensors with high selectivity and sensitivity for biomedical applications.

Metal Nanoparticles/MoS2 Surface-Enhanced Raman Scattering-Based Sandwich Immunoassay for α-Fetoprotein Detection

The detection of cancer biomarkers at an early stage of tumor development is vital for effective diagnosis and treatment of cancer. Current diagnostic tools can often detect cancer only when the biomarker levels are already too high, so that the tumors have spread and treatments are less effective. It is urgent therefore to develop highly sensitive assays for the detection of such biomarkers at the lowest possible concentration. In this context, we developed a sandwich immunoassay based on surface-enhanced Raman scattering (SERS) for the ultrasensitive detection of α-fetoprotein (AFP), which is typically present in human serum as a biomarker indicative of early stages of hepatocellular carcinoma. In the immunoassay design, molybdenum disulfide (MoS2) modified with a monoclonal antibody was used as a capture probe for AFP. A secondary antibody linked to an SERS-encoded nanoparticle was employed as the Raman signal reporter, that is, the transducer for AFP detection. The sandwich immunocomplex "capture probe/target/SERS tag" was deposited on a silicon wafer and decorated with silver-coated gold nanocubes to increase the density of "hot spots" on the surface of the immunosensor. The developed SERS immunosensor exhibits a wide linear detection range (1 pg mL-1 to 10 ng mL-1) with a limit of detection as low as 0.03 pg mL-1 toward AFP with good reproducibility (RSD < 6%) and stability. These parameters demonstrate that the proposed immunosensor has the potential to be used as an analytical platform for the detection of early-stage cancer biomarkers in clinical applications.

Highly Sensitive Electrochemical Detection of Folic Acid by Using a Hollow Carbon Nanospheres@molybdenum Disulfide Modified Electrode

As a nutrient in body functions, folic acid (FA) plays a very important role for human health, and thus developing a highly sensitive method for its determination is of great significance. In the present work, carbon hollow nanospheres decorated with molybdenum disulfide nanosheets (CHN@MoS₂) nanomaterials were produced through a simple method and adopted to modify a glassy carbon electrode for assembling a highly sensitive electrochemical sensor of FA. After characterizing the prepared nanomaterials using scanning-/transmission-electron microscopy and Raman spectra, as well as optimizing various testing conditions, including the pH value of the buffer solution, the accumulation time and amount of nanomaterials on electrode surface, and the electrochemical determination of FA was carried out using a CHN@MoS₂ electrode. Owing to the coordinative advantages from CHN and MoS₂, the results show that CHN@MoS₂ exhibits excellent sensing responses for FA, and it has a wide linear range from 0.08 to 10.0 μM coupled with a low detection limit of 0.02 μM. Finally, the proposed method for FA detection was successfully applied in human urine analysis. The obtained results are satisfactory, revealing that the developed method based on CHN@MoS₂ nanomaterials has important applications for FA determination.

Molybdenum disulfide nanosheets: From exfoliation preparation to biosensing and cancer therapy applications

Over the past few decades, nanotechnology has developed rapidly. Various nanomaterials have been gradually applied in different fields. As a kind of two-dimensional (2D) layered nanomaterial with a graphene-like structure, molybdenum disulfide (MoS₂) nanosheets have broad research prospects in the fields of tumor photothermal therapy, biosensors and other biomedical fields because of their unique band gap structure and physical, chemical and optical properties. In this paper, the latest research progress on MoS₂ is briefly summarized. Several commonly used exfoliation methods for the preparation of MoS₂ nanosheets are reviewed based on the studies in the past five years. Additionally, the current research status of MoS₂ nanosheets in the field of biomedicine is introduced. At the end of this review, a brief overview of the limitations of MoS₂ research and its future prospects in the field of biomedicine is also provided.

SERS analysis of carcinoma-associated fibroblasts in a tumor microenvironment based on targeted 2D nanosheets

Carcinoma-associated fibroblasts (CAFs), one of the most important components of a tumor microenvironment (TME), play a significant role in the complex tumorigenesis process. Herein, the evolution of CAFs in TME is elaborately investigated by surface-enhanced Raman spectroscopy (SERS), a molecular fingerprint technique. Two-dimensional (2D) nanocomposites consisting of gold nanoparticles and a supramolecular "PCsheet" self-assembled between 2D nanosheets and oxidized phosphatidylcholine (PC) are fabricated as SERS-active probes to specifically recognize the CD36 receptor on the cytomembrane of the fibroblasts, a reliable landmark of CAF development. The 2D SERS substrates can also illuminate the fingerprint information around the CD36 protein with high detection sensitivity, which helps elucidate the biochemical component transition in the protein mini-domain during carcinoma progression. Visualized data are then supplied by label-free SERS imaging to exploit the distribution of biomolecules on the plasma membrane. In addition, the repressed expression of CD36 in TME is detected in lung metastasis tumor-bearing mice. This study based on the 2D SERS technique opens up an alternative avenue for unveiling carcinoma-associated molecular events.

Engineering MoS2 nanostructures from various MoO3 precursors towards hydrogen evolution reaction

MoS₂, MoO₂–MoS₂-B and MoO₂–MoS₂-R nanoflowers were prepared using α-MoO₃ particles, α-MoO₃ nanobelts and h-MoO₃ microrods, respectively; larger exposure of Mo–S and lower amounts of Mo–O were responsible for the higher HER performance.

Two-dimensional transition metal dichalcogenides assisted biofunctionalized optical fiber SPR biosensor for efficient and rapid detection of bovine serum albumin

The present study reports an alternative method of functionalizing the optical fiber Surface Plasmon Resonance (SPR) sensing probe with antibodies for label-free detection of bovine serum albumin (BSA) protein. In this novel approach, the gold coated fiber was first modified with Molybdenum disulfide (MoS₂) nanosheets followed by its bio-functionalization with Anti-BSA antibodies. The developed technique not only allowed the amplification of the SPR signals by synergic effects of MoS₂ and gold metallic thin film but also enabled a direct and chemical-free attachment of representative antibodies through hydrophobic interactions. The sensitivity of the MoS₂ modified sensing probe with detection limit of 0.29 µg/mL was improved as compared to the fiber optic SPR biosensor without MoS₂ overlayer (Detection limit  for BSA was 0.45 μg/mL). The developed biosensor has good specificity, and environmental stability. Accordingly, the proposed design of the MoS₂ based SPR optical biosensor can offer the development of a simplified optical device for the monitoring of various biomedical and environmental parameters.

Bioinspired Modification of Layer-Stacked Molybdenum Disulfide (MoS2) Membranes for Enhanced Nanofiltration Performance

Inorganic nanofiltration membranes with high flux are urgently needed in water purification processes. Herein, polydopamine (PDA)-modified layer-stacked molybdenum disulfide (MoS2) nanofiltration membranes (NFMs) were fabricated via a pressure-assisted self-assembly process. The separation performance of the as-prepared membranes with various MoS2 loadings at different dopamine polymerization times was evaluated. The pure water permeance of PDA-modified MoS2 NFMs, with MoS2 loading of 0.1103 mg/cm2 at 4 h modification, could reach 135.3 LMH/bar. The rejection toward methylene blue could reach 100% with molecular weight cutoff approximately 671 Da and a high permeability of salts. Furthermore, the resultant membrane also exhibited a satisfactory long-term stability toward dye solution and antifouling property toward bovine serum albumin. This work may give inspiration to the development of inorganic membranes with high performance, especially high pure water permeance, for water-related processes.

Recent advances in molybdenum disulfide-based electrode materials for electroanalytical applications

The primary objective of this review article is to summarize the development and structural diversity of 2D/3D molybdenum disulfide (MoS₂) based modified electrodes for electrochemical sensors and biosensor applications. Hydrothermal, mechanical, and ultrasonic techniques and solution-based exfoliation have been used to synthesize graphene-like 2D MoS₂ layers. The unique physicochemical properties of MoS₂ and its nanocomposites, including high mechanical strength, high carrier transport, large surface area, excellent electrical conductivity, and rapid electron transport rate, render them useful as efficient transducers in various electrochemical applications. The present review summarizes 2D/3D MoS₂-based nanomaterials as an electrochemical platform for the detection and analysis of various biomolecules (e.g., neurotransmitters, NADH, glucose, antibiotics, DNA, proteins, and bacteria) and hazardous chemicals (e.g., heavy metal ions, organic compounds, and pesticides). The substantial improvements that have been achieved in the performance of enzyme-based amperometry, chemiluminescence, and nucleic acid sensors incorporating MoS₂-based chemically modified electrodes are also addressed. We also summarize key sensor parameters such as limits of detection (LODs), sensitivity, selectivity, response time, and durability, as well as real applications of the sensing systems in the environmental, pharmaceutical, chemical, industrial, and food analysis fields. Finally, the remaining challenges in designing MoS₂ nanostructures suitable for electroanalytical applications are outlined. Graphical abstract • MoS₂ based materials exhibit high conductivity and improved electrochemical performance with great potential as a sensing electrode. • The role of MoS₂ nanocomposite films and their detection strategies were reviewed. • Biomarkers detection for disease identification and respective clinical treatments were discussed. • Future Challenges, as well as possible research development for "MoS₂ nanocomposites", are suggested.

Biological interactions of biocompatible and water-dispersed MoS2 nanosheets with bacteria and human cells

Two dimensional materials beyond graphene such as MoS2 and WS2 are novel and interesting class of materials whose unique physico-chemical properties can be exploited in applications ranging from leading edge nanoelectronics to the frontiers between biomedicine and biotechnology. To unravel the potential of TMD crystals in biomedicine, control over their production through green and scalable routes in biocompatible solvents is critically important. Furthermore, considering multiple applications of eco-friendly 2D dispersions and their potential impact onto live matter, their toxicity and antimicrobial activity still remain an open issue. Herein, we focus on the current demands of 2D TMDs and produce high-quality, few-layered and defect-free MoS2 nanosheets, exfoliated and dispersed in pure water, stabilized up to three weeks. Hence, we studied the impact of this material on human cells by investigating its interactions with three cell lines: two tumoral, MCF7 (breast cancer) and U937 (leukemia), and one normal, HaCaT (epithelium). We observed novel and intriguing results, exhibiting evident cytotoxic effect induced in the tumor cell lines, absent in the normal cells in the tested conditions. The antibacterial action of MoS2 nanosheets is then investigated against a very dangerous gram negative bacterium, such as two types of Salmonellas: ATCC 14028 and wild-type Salmonella typhimurium. Additionally, concentration and layer-dependent modulation of cytotoxic effect is found both on human cells and Salmonellas.

Immunosensor Based on Antibody-Functionalized MoS2 for Rapid Detection of Avian Coronavirus on Cotton Thread

Infectious bronchitis virus (IBV), an avian coronavirus, significantly affects the performance of both the egg-laying and meat-type birds causing the foremost of economic loss in poultry industry. This paper aims to develop a rapid, low-cost, and sensitive biosensor for IBV detection by using molybdenum disulfide (MoS₂). MoS₂ is a 2-D nanosheet which has strong high fluorescence-quenching ability when applied to a dye-labeled antibody (Ab). In this paper, we developed an Ab-functionalized MoS₂-based fluorescent immunosensor, which utilized the fluorescence resonance energy transfer (FRET) between the MoS₂ and fluorescence dye during the Ab-antigen interaction. The assay was performed on a low-cost cotton thread-based microfluidic platform due to the good wicking property and flexibility. Upon the optimization of assay conditions, the immunosensor demonstrated remarkable sensitivity of [Formula: see text] EID₅₀ per mL and specificity with a dynamic linear response range of 10²-10⁶ EID₅₀ per mL for IBV standard solutions. The developed immunoassay successfully detected the IBV spiked chicken serum with satisfactory results. The foregoing presents its potential application for on-farm detection.

A 2D transition-metal dichalcogenide MoS2 based novel nanocomposite and nanocarrier for multiplex miRNA detection

Nanoscale MoS2 has attracted extensive attention for sensing due to its superior properties. This study outlines a microfluidic and electrochemical biosensing methodology for the multiplex detection of paratuberculosis-specific miRNAs. Herein, we report the synthesis of MoS2 nanosheets decorated with a copper ferrite (CuFe2O4) nanoparticle composite and molecular probe immobilized MoS2 nanosheets as nanocarriers for the electrochemical detection of miRNAs. Paratuberculosis is a bacterial infection of the intestinal tract of dairy cattle, and is a cause of substantial economic and animal losses all over the world. The designed biosensing electrode was modified with the synthesized MoS2-CuFe2O4 nanocomposites for a highly amplified signal generation. Additionally, selective detection of miRNAs was accomplished by functionalizing the MoS2 nanosheets with a miRNA-specific biotin-tagged thiolated molecular probe and ferrocene thiol. The presence of target miRNA triggered the opening of the molecular probe present on the nanocarriers. The interaction of the molecular probe and miRNA resulted in an increase in the electrochemical signal from ferrocene. The optimized microfluidic biosensor was employed to detect a range of miRNA concentrations from the target analyte. Using square wave voltammetric analysis, a detection limit of 0.48 pM was calculated, with a detection range of 1 pM to 1.5 nM. The application of the biosensor was also assessed by detecting miRNAs in spiked serum and positive clinical samples. The developed nanomaterial enabled biosensor easily discriminated between the target miRNAs and other interfering molecules. The developed microfluidic biosensor has the potential to be used as a point-of-care, miRNA based diagnostic tool for paratuberculosis in dairy cows.

Quick colorimetric determination of choline in milk and serum based on the use of MoS2 nanosheets as a highly active enzyme mimetic

The authors have synthesized molybdenum disulfide nanosheets (MoS₂ nanosheets) by using a bottom-up hydrothermal method. The nanosheets display strong catalytic (enzyme mimetic) activity in catalyzing the oxidation of peroxidase substrate of 3,3',5,5'-tetramethylbenzidine (TMB) in presence of H₂O₂ to produce a blue product. The peroxidase mimicking properties of MoS₂ nanosheets depend on temperature, H₂O₂ concentration and pH value. A choline assay was worked out where choline was oxidized by choline oxidase in presence of oxygen to produce H₂O₂ which is colorimetrically detected, best at 652 nm. The method works in the 1 to 180 μM choline concentration range with a 0.4 μM detection limit. Color changes may also be detected visually. The assay is simple, highly sensitive, selective and rapid. It was applied in the determination of choline in (spiked) milk and serum. Graphical abstract Basic principle of intrinsic peroxidase-like activity of MoS₂ nanosheets, applied to design a rapid and selective colorimetric assay for choline detection based on the tetramethylbenzidine (TMB) color reaction.