Enhancing the sensitivity of DNA detection by structurally modified solid-state nanopore

Detection and identification of single ribonucleotide monophosphates using a dual in-plane nanopore sensor made in a thermoplastic via replication

We report the generation of ∼8 nm dual in-plane pores fabricated in a thermoplastic via nanoimprint lithography (NIL). These pores were connected in series with nanochannels, one of which served as a flight tube to allow the identification of single molecules based on their molecular-dependent apparent mobilities (i.e., dual in-plane nanopore sensor). Two different thermoplastics were investigated including poly(methyl methacrylate), PMMA, and cyclic olefin polymer, COP, as the substrate for the sensor both of which were sealed using a low glass transition cover plate (cyclic olefin co-polymer, COC) that could be thermally fusion bonded to the PMMA or COP substrate at a temperature minimizing nanostructure deformation. Unique to these dual in-plane nanopore sensors was two pores flanking each side of the nanometer flight tube (50 × 50 nm, width × depth) that was 10 μm in length. The utility of this dual in-plane nanopore sensor was evaluated to not only detect, but also identify single ribonucleotide monophosphates (rNMPs) by using the travel time (time-of-flight, ToF), the resistive pulse event amplitude, and the dwell time. In spite of the relatively large size of these in-plane pores (∼8 nm effective diameter), we could detect via resistive pulse sensing (RPS) single rNMP molecules at a mass load of 3.9 fg, which was ascribed to the unique structural features of the nanofluidic network and the use of a thermoplastic with low relative dielectric constants, which resulted in a low RMS noise level in the open pore current. Our data indicated that the identification accuracy of individual rNMPs was high, which was ascribed to an improved chromatographic contribution to the nano-electrophoresis apparent mobility. With the ToF data only, the identification accuracy was 98.3%. However, when incorporating the resistive pulse sensing event amplitude and dwell time in conjunction with the ToF and analyzed via principal component analysis (PCA), the identification accuracy reached 100%. These findings pave the way for the realization of a novel chip-based single-molecule RNA sequencing technology.

Electrokinetic Enrichment and Label-Free Electrochemical Detection of Nucleic Acids by Conduction of Ions along the Surface of Bioconjugated Beads

In this paper, we report a method to integrate the electrokinetic pre-enrichment of nucleic acids within a bed of probe-modified microbeads with their label-free electrochemical detection. In this detection scheme, hybridization of locally enriched target nucleic acids to the beads modulates the conduction of ions along the bead surfaces. This is a fundamental advancement in that this mechanism is similar to that observed in nanopore sensors, yet occurs in a bed of microbeads with microscale interstices. In application, this approach has several distinct advantages. First, electrokinetic enrichment requires only a simple DC power supply, and in combination with nonoptical detection, it makes this method amenable to point-of-care applications. Second, the sensor is easy to fabricate and comprises a packed bed of commercially available microbeads, which can be readily modified with a wide range of probe types, thereby making this a versatile platform. Finally, the sensor is highly sensitive (picomolar) despite the modest 100-fold pre-enrichment we employ here by faradaic ion concentration polarization (fICP). Further gains are anticipated under conditions for fICP focusing that are known to yield higher enrichment factors (up to 100,000-fold enrichment). Here, we demonstrate the detection of 3.7 pM single-stranded DNA complementary to the bead-bound oligoprobe, following a 30 min single step of enrichment and hybridization. Our results indicate that a shift in the slope of a current-voltage curve occurs upon hybridization and that this shift is proportional to the logarithm of the concentration of target DNA. Finally, we investigate the proposed mechanism of sensing by developing a numerical simulation that shows an increase in ion flux through the bed of insulating beads, given the changes in surface charge and zeta potential, consistent with our experimental conditions.

dCas9-Mediated PCR-Free Detection of Oncogenic Mutation by Nonequilibrium Nanoelectrokinetic Selective Preconcentration

Cutting-edge nanoelectrokinetic technology in this work provides a breakthrough for the present clinical demands of molecular diagnosis to detect a trace amount of oncogenic mutation of DNA in a short time without an erroneous PCR procedure. In this work, we combined the sequence-specific labeling scheme of CRISPR/dCas9 and ion concentration polarization (ICP) mechanism to separately preconcentrate target DNA molecules for rapid detection. Using the mobility shift caused by dCas9's specific binding to the mutant, the mutated DNA and normal DNA were distinguished in the microchip. Based on this technique, we successfully demonstrated the dCas9-mediated 1-min detection of single base substitution (SBS) in EGFR DNA, a carcinogenesis indicator. Moreover, the presence/absence of target DNA was identified at a glance like a commercial pregnancy test kit (two lines for positive and one line for negative) by the distinct preconcentration mechanisms of ICP, even at the 0.1% concentration of the target mutant.

Solid-state nanopore: chemical modifications, interactions, and functionalities

Nanopore technology is a burgeoning detection technology for single-molecular sensing and ion rectification. Solid-state nanopores have attracted more and more attention because of their higher stability and tunability than biological nanopores. However, solid-state nanopores still suffer the drawbacks of low signal-to-noise ratio and low resolution, which hinders their practical applications. Thus, developing operatical and useful methods to overcome the shortages of solid-state nanopores is urgently needed. Here, we summarize the recent research on nanopore modification to achieve this goal. Modifying solid-state nanopores with different coating molecules can improve the selectivity, sensitivity, and stability of nanopores. The modified molecules can introduce different functions into the nanopores, greatly expanding the applications of this novel detection technology. We hope that this review of nanopore modification will provide new ideas for this field.

Light-Controlled Ionic/Molecular Transport through Solid-State Nanopores and Nanochannels

Biological nanochannels perfectly operate in organisms and exquisitely control mass transmembrane transport for complex life process. Inspired by biological nanochannels, plenty of intelligent artificial solid-state nanopores and nanochannels are constructed based on various materials and methods with the development of nanotechnology. Specially, the light-controlled nanopores/nanochannels have attracted much attention due to the unique advantages in terms of that ion and molecular transport can be regulated remotely, spatially and temporally. According to the structure and function of biological ion channels, light-controlled solid-state nanopores/nanochannels can be divided into light-regulated ion channels with ion gating and ion rectification functions, and light-driven ion pumps with active ion transport property. In this review, we present a systematic overview of light-controlled ion channels and ion pumps according to the photo-responsive components in the system. Then, the related applications of solid-state nanopores/nanochannels for molecular sensing, water purification and energy conversion are discussed. Finally, a brief conclusion and short outlook are offered for future development of the nanopore/nanochannel field.

Label-Free Identification of Single Mononucleotides by Nanoscale Electrophoresis

Nanoscale electrophoresis allows for unique separations of single molecules, such as DNA/RNA nucleobases, and thus has the potential to be used as single molecular sensors for exonuclease sequencing. For this to be envisioned, label-free detection of the nucleotides to determine their electrophoretic mobility (i.e., time-of-flight, TOF) for highly accurate identification must be realized. Here, for the first time a novel nanosensor is shown that allows discriminating four 2-deoxyribonucleoside 5'-monophosphates, dNMPs, molecules in a label-free manner by nanoscale electrophoresis. This is made possible by positioning two sub-10 nm in-plane pores at both ends of a nanochannel column used for nanoscale electrophoresis and measuring the longitudinal transient current during translocation of the molecules. The dual nanopore TOF sensor with 0.5, 1, and 5 µm long nanochannel column lengths discriminates different dNMPs with a mean accuracy of 55, 66, and 94%, respectively. This nanosensor format can broadly be applicable to label-free detection and discrimination of other single molecules, vesicles, and particles by changing the dimensions of the nanochannel column and in-plane nanopores and integrating different pre- and postprocessing units to the nanosensor. This is simple to accomplish because the nanosensor is contained within a fluidic network made in plastic via replication.

Effect of single nanoparticle-nanopore interaction strength on ionic current modulation

Solid-state nanopores are rapidly emerging as promising platforms for developing various single molecule sensing applications. The modulation of ionic current through the pore due to translocation of the target molecule has been the dominant measurement modality in nanopore sensors. Here, we focus on the dwell time, which is the duration taken by the target molecule or particle to traverse the pore and study its dependence on the strength of interaction of the target with the pore using single gold nanoparticles (NPs) as targets interacting with a silicon nitride (SiN) nanopore. The strength of interaction, which in our case is electrostatic in nature, can be controlled by coating the nanoparticles with charged polymers. We report on an operating regime of this nanopore sensor, characterized by attractive interactions between the nanoparticle and the pore, where the dwell time is exponentially sensitive to the target-pore interaction. We used negatively and positively charged gold nanoparticles to control the strength of their interaction with the Silicon Nitride pore which is negatively charged. Our experiments revealed how this modulation of the electrostatic force greatly affects the dwell time. Positively charged NPs with strong attractive interactions with the pore resulted in increase of dwell times by 2-3 orders of magnitude, from 0.4 ms to 75.3 ms. This extreme sensitivity of the dwell time on the strength of interaction between a target and nanopore can be exploited in emerging nanopore sensor applications.

Surface modification of solid-state nanopore by plasma-polymerized chemical vapor deposition of poly(ethylene glycol) for stable device operation

Biopolymer adsorption onto a membrane is a significant issue in the reliability of solid-state nanopore devices, since it degrades the device performance or promotes device failure. In this work, a poly(ethylene glycol) (PEG) layer was coated on a silicon nitride (SiN_x) membrane by plasma-polymerized vapor deposition to inhibit biopolymer adsorption. From optical observations, the deposited PEG layer demonstrated increased hydrophilicity and anti-adsorption property compared to the SiN_x surface. Electrical properties of the PEG/SiN_x nanopore were characterized, showing Ohmic behavior and a 6.3 times higher flicker noise power due to the flexible conformation of PEG in water. Antifouling performance of each surface was analyzed by measuring the average time from voltage bias to the first adsorption during DNA translocation experiments, where the modified surface enabled two times prolonged device operation. The time to adsorption was dependent on the applied voltage, implying adsorption probability was dominated by the electrophoretic DNA approach to the nanopore. DNA translocation behaviors on each surface were identified from translocation signals, as the PEG layer promoted unfolded and fast movement of DNA through the nanopore. This work successfully analyzed the effect of the PEG layer on DNA adsorption and translocation in solid-state nanopore experiments.

Surface conduction and electroosmotic flow around charged dielectric pillar arrays in microchannels

Dielectric microstructures have been reported to have a negative influence on permselective ion transportation because ions do not migrate in areas where the structures are located. However, the structure can promote the transportation if the membrane is confined to a microscopic scale. In such a scale where the area to volume ratio is significantly large, the primary driving mechanisms of the ion transportation transition from electro-convective instability (EOI) to surface conduction (SC) and electroosmotic flow (EOF). Here, we provide rigorous evidence on how the SC and EOF around the dielectric microstructures can accelerate the ion transportation by multi-physics simulations and experimental visualizations. The microstructures further polarize the ion distribution by SC and EOF so that ion carriers can travel to the membrane more efficiently. Furthermore, we verified, for the first time, that the arrangements of microstructures have a critical impact on the ion transportation. While convective flows are isolated in the crystal pillar configuration, the flows show an elongated pattern and create an additional path for ion current in the aligned pillar configuration. Therefore, the fundamental findings of the electrokinetic effects on the dielectric microstructures suggest an innovative application in micro/nanofluidic devices with high mass transport efficiency.

Analytical study of AC electroosmotic mixing in 2-dimensional microchannel with time periodic surface potential

This work reported an analytic study of AC electroosmotic flows with a view to control the degree of mixing in a rectangular microchannel. Only with spatially non-uniform zeta potential distribution, fluid particles travel back and forth along a vortical flow field developed inside a microchannel. Although complex patterns of electroosmotic vortical flows can be obtained by various types of non-uniform zeta potential distributions, fluid particles always follow regular paths due to a laminar flow limit. To further facilitate the mixing of sample fluid, we propose a scheme that the zeta potential distribution was temporally non-uniform as well. General solutions for both the double layer potential distribution and the AC electroosmotic flow field are analytically determined by solving the unsteady Stokes equation with an electrostatic body force. As an illustrative example, we consider a case where two different types of non-uniform zeta potential distributions alternate with each other and the effects of both the AC frequency and the frequency of the alternation of the two zeta potential distributions on flow characteristics are examined using the Poincaré sections. Conclusively, one can either enhance or prevent mixing compared to a static electroosmotic flow, which is in line with previously demonstrated experimental works. Thus, the results presented would be an effective mean for controllable electroosmotic flow in a microfluidic platform.

dCas9-mediated Nanoelectrokinetic Direct Detection of Target Gene for Liquid Biopsy

The-state-of-the-art bio- and nanotechnology have opened up an avenue to noninvasive liquid biopsy for identifying diseases from biomolecules in bloodstream, especially DNA. In this work, we combined sequence-specific-labeling scheme using mutated clustered regularly interspaced short palindromic repeats associated protein 9 without endonuclease activity (CRISPR/dCas9) and ion concentration polarization (ICP) phenomenon as a mechanism to selectively preconcentrate targeted DNA molecules for rapid and direct detection. Theoretical analysis on ICP phenomenon figured out a critical mobility, elucidating two distinguishable concentrating behaviors near a nanojunction, a stacking and a propagating behavior. Through the modulation of the critical mobility to shift those behaviors, the C-C chemokine receptor type 5 ( CCR5) sequences were optically detected without PCR amplification. Conclusively, the proposed dCas9-mediated genetic detection methodology based on ICP would provide rapid and accurate micro/nanofluidic platform of liquid biopsies for disease diagnostics.

Surface Conduction in a Microchannel

Ionic current through a microchannel has drawn significant attention not only for fundamental electrokinetic research but also for the development of novel micro/nanofluidic applications. Among various ion transport mechanisms, surface conduction, which is a predominant mechanism in micro/nanofluidic devices, has been theoretically characterized based on two-dimensional analysis. However, its infinite axis assumption has become a barrier for direct application in practical micro/nanochannel networks. In this work, we conducted rigorous experiments to include all of the three-dimensional length scales. There, L/ A, the perimeter to area ratio of the microchannel cross-section, came up as a single parameter to quantitatively interpret the surface conductive ion transportation. Overlimiting conductance of microchannel devices increased with larger perimeter, which is equivalent to specific surface area, even with the same cross sectional area. Finally, a micro/nanofluidic diode with a different L/ A value on its forward and reverse channel was demonstrated as a simple application. The analysis presented could provide a practical guideline to design a micro/nanofluidic application.