Fabrication, characterization, and high temperature surface enhanced Raman spectroscopic performance of SiO2 coated silver particles

Au nanoparticles decorated β-Bi2O3 as highly-sensitive SERS substrate for detection of methylene blue and methyl orange

In this work, Au/Bi2O3 was synthesized by loading Au nanoparticles (NPs) onto β-Bi2O3 by a simple solution reduction method. β-Bi2O3 was synthesized by a precipitation-thermal decomposition procedure, which results in significantly improved SERS detection limits down to 10-9 M for methylene blue (MB) and 10-7 M for methyl orange (MO) as probe molecules, comparable to those reported for the best semiconductor SERS substrates. In particular, further deposition of Au NPs (5.20% wt%) onto β-Bi2O3 results in a two-order-of-magnitude enhancement in detection sensitivity, achieving a detection limit of 10-11 M for MB and 10-9 M for MO. Under ultraviolet/visible irradiation, the Au/Bi2O3 hybrids substrate exhibits superior self-cleaning ability due to its photocatalytic degradation ability which can be applied repeatedly to the detection of pollutants. The advanced composite substrate simultaneously achieved ultra-low mass loading of Au NPs, outstanding detection performance, good reproducibility, high stability and self-cleaning ability. The development strategy of low load noble metal coupled high performance semiconductor β-Bi2O3 to obtain nano-hybrid materials provides a method to balance SERS sensitivity, cost effectiveness and operational stability, and can be synthesized in large quantities, which is a key step towards commercialization and has good reliability prospects.

Synthesis of cuprous oxide/silver (Cu2O/Ag) hybrid as surface-enhanced Raman scattering probe for trace determination of methyl orange

Recently, there have been publications on preparing hybrid materials between noble metal and semiconductor for applications in surface-enhanced Raman scattering (SERS) substrates to detect some toxic organic dyes. However, the use of cuprous oxide/silver (Cu₂O/Ag) to measure the trace amounts of methyl orange (MO) has not been reported. Therefore, in this study, the trace level of MO in water solvent was determined using a SERS substrate based on Cu₂O microcubes combined with silver nanoparticles (Ag NPs). Herein, a series of Cu₂O/Agx (x= 1-5) hybrids with various Ag amounts was synthesized via a solvothermal method followed by a reduction process, and their SERS performance was studied in detail. X-ray diffraction (XRD) and scanning electron microscopy results confirmed that 10 nm Ag NPs were well dispersed on 200-500 nm Cu₂O microcubes to form Cu₂O/Ag heterojunctions. Using the as-prepared Cu₂O and Cu₂O/Agx as MO probe, the Cu₂O/Ag5 nanocomposite showed the highest SERS activity of all samples with the limit of detection as low to 1 nM and the enhancement factor as high as 4 × 10⁸. The logarithm of the SERS peak intensity at 1389 cm^-1 increased linearly with the logarithm of the concentration of MO in the range from 1 nM to 0.1 mM.

Sensors for Detection of the Synthetic Dye Rhodamine in Environmental Monitoring Based on SERS

This article presents a review of many types of SERS sensors for food safety and environmental pollution monitoring based on detecting rhodamine. It introduces the basic concepts of substrates, enhancement factors, and mechanisms, devices' sensors integrated with the microstructure. Here, we review the state-of-the-art research in the field of rhodamine monitoring and highlight the applications of SERS sensors. The trends in the development of substrates for different applications have been mentioned with the aim of providing an overview of the development of different SERS substrates. Thus, an efficient approach for rhodamine detection has a good perspective for application in environmental monitoring.

Thermal and Plasmonic Stabilization of Silver Nanostructures Using a Bilayer Anchoring Technique

In this work, we demonstrate how to suppress the shape instability of silver (Ag) nanotriangular pyramids following high-temperature annealing without a coating or encapsulation, thus producing a more stable optical plasmonic system. Nanosphere lithography (NSL) was used to fabricate large-area arrays of nanotriangular pyramids of Ag on glass substrates. By using a combination of morphology and spectroscopic studies it was found that exposure of this system to high temperatures of 473 K and beyond in air led to a rapid change in nanostructure shape, and thus, the surface area, with a substantial change to the original plasmonic character. On the other hand, NSL nanotriangular pyramids made from bilayers of Ag on Co or Co on Ag showed much smaller changes in shape and area following annealing up to 573 K in air. In the case of pure Ag, the NSL nanotriangular pyramid changed into a more spherical shape with an overall decrease of ∼24% in its surface area following annealing at 573 K. This lead to a large blue shift of over ∼287 nm or ∼39% in the location of the dipolar plasmonic resonance. On the other hand, the triangular shape of Ag was retained in both the metal bilayer cases, with much smaller area changes of ∼10 and ∼9%, for the Ag deposit when on Co and when under Co, respectively. Consequently, the plasmonic shifts were substantially smaller, of ∼65 nm or about 9%, in these bilayer systems. The mechanism for this stabilization was attributed to the higher surface energy of Co and much lower diffusivity of Co as well as Ag on Co that resulted in an anchoring of the Ag shape to its original state. The plasmonic quality factor for the bimetal NSL nanotriangular pyramids also showed substantially improved stability over pure Ag, further indicating that this anchoring approach is a viable pathway to produce pristine Ag surfaces for high-temperature plasmonic applications.