Theoretical modulation of singlet/triplet chemiexcitation of chemiluminescent imidazopyrazinone dioxetanone via C8-substitution

Investigation of the Chemiluminescent Reaction of a Fluorinated Analog of Marine Coelenterazine

Bioluminescence (BL) and chemiluminescence (CL) are remarkable processes in which light is emitted due to (bio)chemical reactions. These reactions have attracted significant attention for various applications, such as biosensing, bioimaging, and biomedicine. Some of the most relevant and well-studied BL/CL systems are that of marine imidazopyrazine-based compounds, among which Coelenterazine is a prime example. Understanding the mechanisms behind efficient chemiexcitation is essential for the optimization and development of practical applications for these systems. Here, the CL of a fluorinated Coelenterazine analog was studied using experimental and theoretical approaches to obtain insight into these processes. Experimental analysis revealed that CL is more efficient under basic conditions than under acidic ones, which could be attributed to the higher relative chemiexcitation efficiency of an anionic dioxetanone intermediate over a corresponding neutral species. However, theoretical calculations indicated that the reactions of both species are similarly associated with both electron and charge transfer processes, which are typically used to explain efficiency chemiexcitation. So, neither process appears to be able to explain the relative chemiexcitation efficiencies observed. In conclusion, this study provides further insight into the mechanisms behind the chemiexcitation of imidazopyrazinone-based systems.

Theoretical investigation on triphenylamine coelenteramide for bioinspired OLED application using thiophene rings in π-bridge

As light emitter of most marine organisms bioluminescence, coelenteramide (CLM) received much attention due to some exciting application in the field of bioinspired organic light-emitting devices (OLED). Nevertheless, native CLM only emit bright blue light. In order to obtain light of different colors, two CLM analogues, TPA-CLM and TPA-TP-CLM were designed by introduction of triphenylamine group and (thiophene) π-bridge. On the other hand, because the light emitter, CLM was produced by the chemical reaction which originates from the oxidation of bioluminescent substrate, coelenterazine (CLZ), it must be evaluated if and how substituent group tune the chemiluminescent (CL) reaction mechanism, firstly. In this article, the complete chemiluminescent reaction mechanism of TPA-CLZ and TPA-TP-CLZ and the photophysical properties of light emitters, TPA-CLM and TPA-TP-CLM were investigated by (time-dependent) density functional theory, (TD) DFT calculations. The calculations indicate that the introduction of triphenylamine and π-bridge minimally affect the complete reaction process. For the light emitters, TPA-CLM and TPA-TP-CLM, the calculation results indicate that the injection abilities of hole and electron can be largely improved by introduction of triphenylamine and π-bridge. The absorption and emission spectra appeared at longer wavelengths than native CLM. These results illustrate that TPA-CLM and TPA-TP-CLM are good candidates for bioinspired OLED application.

The Role of Tyr-His-Trp Triad and Water Molecule Near the N1-Atom of 2-Hydroperoxycoelenterazine in Bioluminescence of Hydromedusan Photoproteins: Structural and Mutagenesis Study

Hydromedusan photoproteins responsible for the bioluminescence of a variety of marine jellyfish and hydroids are a unique biochemical system recognized as a stable enzyme-substrate complex consisting of apoprotein and preoxygenated coelenterazine, which is tightly bound in the protein inner cavity. The binding of calcium ions to the photoprotein molecule is only required to initiate the light emission reaction. Although numerous experimental and theoretical studies on the bioluminescence of these photoproteins were performed, many features of their functioning are yet unclear. In particular, which ionic state of dioxetanone intermediate decomposes to yield a coelenteramide in an excited state and the role of the water molecule residing in a proximity to the N1 atom of 2-hydroperoxycoelenterazine in the bioluminescence reaction are still under discussion. With the aim to elucidate the function of this water molecule as well as to pinpoint the amino acid residues presumably involved in the protonation of the primarily formed dioxetanone anion, we constructed a set of single and double obelin and aequorin mutants with substitutions of His, Trp, Tyr, and Ser to residues with different properties of side chains and investigated their bioluminescence properties (specific activity, bioluminescence spectra, stopped-flow kinetics, and fluorescence spectra of Ca²⁺-discharged photoproteins). Moreover, we determined the spatial structure of the obelin mutant with a substitution of His64, the key residue of the presumable proton transfer, to Phe. On the ground of the bioluminescence properties of the obelin and aequorin mutants as well as the spatial structures of the obelin mutants with the replacements of His64 and Tyr138, the conclusion was made that, in fact, His residue of the Tyr-His-Trp triad and the water molecule perform the "catalytic function" by transferring the proton from solvent to the dioxetanone anion to generate its neutral ionic state in complex with water, as only the decomposition of this form of dioxetanone can provide the highest light output in the light-emitting reaction of the hydromedusan photoproteins.

Conical Intersection in Chemiluminescence of Cyclic Peroxides

Chemiluminescence (CL) utilizing chemiexcitation for energy transformation is one of the most highly sensitive and useful analytical techniques. The chemiexcitation is a chemical process of a ground-state reactant producing an excited-state product, in which a nonadiabatic event is facilitated by conical intersections (CIs), the specific molecular geometries where electronic states are degenerated. Cyclic peroxides, especially 1,2-dioxetane/dioxetanone derivatives, are the iconic chemiluminescent substances. In this Perspective, we concentrated on the CIs in the CL of cyclic peroxides. We first present a computational overview on the role of CIs between the ground (S₀) state and the lowest singlet excited (S₁) state in the thermolysis of cyclic peroxides. Subsequently, we discuss the role of the S₀/S₁ CI in the CL efficiency and point out misunderstandings in some theoretical studies on the singlet chemiexcitations of cyclic peroxides. Finally, we address the challenges and future prospects in theoretically calculating S₀/S₁ CIs and simulating the dynamics and chemiexcitation efficiency in the CL of cyclic peroxides.

Comparative Investigation of the Chemiluminescent Properties of a Dibrominated Coelenterazine Analog

Chemi- and bioluminescence are remarkable light-emitting phenomena, in which thermal energy is converted into excitation energy due to a (bio)chemical reaction. Among a wide variety of chemi-/bioluminescent systems, one of the most well-known and studied systems is that of marine imidazopyrazinones, such as Coelenterazine and Cypridina luciferin. Due to the increasing usefulness of their chemi-/bioluminescent reactions in terms of imaging and sensing applications, among others, significant effort has been made over the years by researchers to develop new derivatives with enhanced properties. Herein, we report the synthesis and chemiluminescent characterization of a novel dibrominated Coelenterazine analog. This novel compound consistently showed superior luminescence, in terms of total light output and emission lifetime, to natural imidazopyrazinones and commercially available analogs in aprotic media, while being capable of yellow light emission. Finally, this new compound showed enhanced chemiluminescence in an aqueous solution when triggered by superoxide anion, showing potential to be used as a basis for optimized probes for reactive oxygen species. In conclusion, bromination of the imidazopyrazinone scaffold appears to be a suitable strategy for obtaining Coelenterazines with enhanced properties.

Tuning the Intramolecular Chemiexcitation of Neutral Dioxetanones by Interaction with Ionic Species

The intramolecular chemiexcitation of high-energy peroxide intermediates, such as dioxetanones, is an essential step in different chemi- and bioluminescent reactions. Here, we employed the Time-Dependent Density Functional Theory (TD-DFT) methodology to evaluate if and how external stimuli tune the intramolecular chemiexcitation of model dioxetanones. More specifically, we evaluated whether the strategic placement of ionic species near a neutral dioxetanone model could tune its thermolysis and chemiexcitation profile. We found that these ionic species allow for the “dark” catalysis of the thermolysis reaction by reducing the activation barrier to values low enough to be compatible with efficient chemi- and bioluminescent reactions. Furthermore, while the inclusion of these species negatively affected the chemiexcitation profile compared with neutral dioxetanones, these profiles appear to be at least as efficient as anionic dioxetanones. Thus, our results demonstrated that the intramolecular chemiexcitation of neutral dioxetanones can be tuned by external stimuli in such a way that their activation barriers are decreased. Thus, these results could help to reconcile findings that neutral dioxetanones could be responsible for efficient chemi-/bioluminescence, while being typically associated with high activation parameters.

Theoretical Study of the Thermolysis Reaction and Chemiexcitation of Coelenterazine Dioxetanes

Coelenterazine and other imidazopyrazinones are important bioluminescent substrates widespread in marine species and can be found in eight phyla of luminescent organisms. Light emission from these systems is caused by the formation and subsequent thermolysis of a dioxetanone intermediate, whose decomposition allows for efficient chemiexcitation to singlet excited states. Interestingly, some studies have also reported the involvement of unexpected dioxetane intermediates in the chemi- and bioluminescent reactions of Coelenterazine, albeit with little information on the underlying mechanisms of these new species. Herein, we have employed a theoretical approach based on density functional theory to study for the first time the thermolysis reaction and chemiexcitation profile of two Coelenterazine dioxetanes. We have found that the thermolysis reactions of these species are feasible but with relevant energetic differences. More importantly, we found that the singlet chemiexcitation profiles of these dioxetanes are significantly less efficient than the corresponding dioxetanones. Furthermore, we identified triplet chemiexcitation pathways for the Coelenterazine dioxetanes. Given this, the chemiexcitation of these dioxetanes should lead only to minimal luminescence. Thus, our theoretical investigation of these systems indicates that the thermolysis of these dioxetanes should only provide "dark" pathways for the formation of nonluminescent degradation products of the chemi- and bioluminescent reactions of Coelenterazine and other imidazopyrazinones.

Elucidating the chemiexcitation of dioxetanones by replacing the peroxide bond with S–S, N–N and C–C bonds

Replacing the peroxide bond of dioxetanone prevents chemiluminescence by making its thermolysis energetically unfavorable and without a singlet chemiexcitation pathway.

Single-molecule chemiluminescent photosensitizer for a self-activating and tumor-selective photodynamic therapy of cancer

While photodynamic therapy is known for significant advantages over conventional cancer therapies, its dependence on light has limited it to treating tumors on or just under the skin or on the outer lining of organs/cavities. Herein, we have developed a single-molecule photosensitizer capable of intracellular self-activation and with potential tumor-selectivity due to a chemiluminescent reaction involving only a cancer marker. Thus, the photosensitizer is directly chemiexcited to a triplet excited state capable of generating singlet oxygen, without requiring either a light source or any catalyst/co-factor. Cytotoxicity assays involving the photosensitizer show significant toxicity toward tumor cells, even better than reference drugs, while not inducing toxicity toward normal cells. This work provides a proof-of-concept for a novel type of photosensitizer that eliminates the current restrictions that photodynamic therapy presents regarding tumor size and localization.

Study of the Combination of Self-Activating Photodynamic Therapy and Chemotherapy for Cancer Treatment

Cancer is a very challenging disease to treat, both in terms of treatment efficiency and side-effects. To overcome these problems, there have been extensive studies regarding the possibility of improving treatment by employing combination therapy, and by exploring therapeutic modalities with reduced side-effects (such as photodynamic therapy (PDT)). Herein, this work has two aims: (i) to develop self-activating photosensitizers for use in light-free photodynamic therapy, which would eliminate light-related restrictions that this therapy currently possesses; (ii) to assess their co-treatment potential when combined with reference chemotherapeutic agents (Tamoxifen and Metformin). We synthesized three new photosensitizers capable of self-activation and singlet oxygen production via a chemiluminescent reaction involving only a cancer marker and without requiring a light source. Cytotoxicity assays demonstrated the cytotoxic activity of all photosensitizers for prostate and breast tumor cell lines. Analysis of co-treatment effects revealed significant improvements for breast cancer, producing better results for all combinations than just for the individual photosensitizers and even Tamoxifen. By its turn, co-treatment for prostate cancer only presented better results for one combination than for just the isolated photosensitizers and Metformin. Nevertheless, it should be noted that the cytotoxicity of the isolated photosensitizers in prostate tumor cells was already very appreciable.

Comparative study of the chemiluminescence of coelenterazine, coelenterazine-e and Cypridina luciferin with an experimental and theoretical approach

Imidazopyrazinone is a typical scaffold present in marine bioluminescence, in which thermal energy is converted into excitation energy in an enzyme-catalyzed reaction. In fact, the imidazopyrazinone scaffold is a common link among organisms of eight phyla. The characterization of the light emission mechanism is essential for the development of future applications in bioimaging, bioanalysis and biomedicine. Herein, we have studied the chemiluminescent reaction of three commercially-available imidazopyrazinones (Cypridina luciferin, Coelenterazine and Coelenterazine-e) in several aprotic solvents at different pH. We have found that at acidic pH only DMF and DMSO consistently present high light emission, while chemiluminescence in other solvents is negligible. We have attributed this to the inability of most solvents to allow for the deprotonation of the imidazopyrazinone core, thereby preventing the oxygenation step. We have also observed that increasing the pH of the solution leads to the inhibition of chemiluminescence, which we attributed to the deprotonation of the dioxetanone intermediate, as the neutral species is the one associated with efficient chemiexcitation. We have also observed that the pK_a of dioxetanone increases with the dielectric constant of the medium. Finally, our work indicated that the chemiexcitation yield increases with increasing polarity of the medium, due to a reduced transition dipole moment associated with S₀ → S₁ transition.

Excited-State Proton Transfer of Phenol Cyanine Picolinium Photoacid

Steady-state and time-resolved fluorescence techniques as well as quantum-mechanical calculations were used to study the photophysics and photochemistry of a newly synthesized photoacid-the phenol cyanine picolinium salt. We found that the nonradiative rate constant k nr of the excited protonated form of the photoacid is larger than that of the excited-state proton transfer (ESPT) to the solvent, k ESPT. We estimate that the quantum efficiency of the ESPT process is about 0.16. The nonradiative process is explained by a partial trans-cis isomerization reaction, which leads to the formation of a "dark" excited state that can cross to the ground state by nonadiabatic coupling. Moreover, the ESPT process is coupled to the photo-isomerization reaction, as this latter reaction enhances the photoacidity of the studied compound, as a result of photoinduced charge transfer. To prevent trans-cis isomerization of the cyanine bridge, we conducted experiments of PCyP adsorbed on cellulose in the presence of water. We found that the steady-state fluorescence intensity increased by about a factor of 50 and the lifetime of the ROH band increased by the same factor. The fluorescence intensity of the RO- band with respect to that of the ROH band was the same as in aqueous solution. This explains why inhibiting the photo-isomerization reaction by adsorbing the PCyP on cellulose does not lead to a higher ESPT rate.

Theoretical Analysis of the Effect Provoked by Bromine-Addition on the Thermolysis and Chemiexcitation of a Model Dioxetanone

Chemi-/bioluminescence are phenomena in which chemical energy is converted into electronically excited singlet states, which decay with light emission. Given this feature, along with high quantum yields and other beneficial characteristics, these systems have gained numerous applications in bioanalysis, in biomedicine, and in the pharmaceutical field. Singlet chemiexcitation is made possible by the formation of cyclic peroxides (as dioxetanones) as thermolysis provides a route for a ground state reaction to produce singlet excited states. However, such thermolysis can also lead to the formation of triplet states. While triplet states are not desired in the typical applications of chemi-/bioluminescence, the efficient production of such states can open the door for the use of these systems as sensitizers in photocatalysis and triplet-triplet annihilation, among other fields. Thus, the goal of this study is to assess the effect of heavy atom addition on the thermolysis and triplet chemiexcitation of a model dioxetanone. Monobromination does not affect the thermolysis reaction but can improve the efficiency of intersystem crossing, depending on the position of monobromination. Addition of bromine atoms to the triplet state reaction product has little effect on its properties, except on its electron affinity, in which monobromination can increase between 3.1 and 8.8 kcal mol−1.