Dual-defect semiconductor photocatalysts for solar-to-chemical conversion: advances and challenges

Among the renewable energy technologies to deal with increasing energy crisis and environmental concerns, solar-to-chemical conversion via photocatalysis holds great promise for sustainable energy supply. To date, a variety of modification strategies with different types of semiconducting materials have been proposed to boost photocatalytic efficiency. Recently, dual-defect semiconductor photocatalysts have emerged as an advantageous candidate with superior performance in improving photocatalytic activity compared to their defect-free or single-defect counterparts. In this review, focus is laid on the advances of dual-defect semiconductor photocatalysts for energy photocatalysis. Possible schemes for two different defects within a single semiconductor are firstly sorted based on the types of defects, and synthesis strategies to achieve various defect schemes as well as techniques to characterize different defects are then introduced. In particular, the effect of different defects on photocatalytic performance is emphasized, and the advances in dual-defect semiconductors for solar-to-chemical conversions are summarized based on different defect schemes. Finally, the future challenges and opportunities of dual-defect semiconductors for photocatalysis are discussed. This article is expected to provide an overall insight into existing dual-defect semiconductor photocatalysts and inspire the development of new defect-rich materials for photocatalytic energy production.

Recent progress in TiO2-biochar-based photocatalysts for water contaminants treatment: strategies to improve photocatalytic performance

Toxic organic pollutants in wastewater have seriously damaged human health and ecosystems. Photocatalytic degradation is a potential and efficient tactic for wastewater treatment. Among the entire carbon family, biochar has been developed for the adsorption of pollutants due to its large specific surface area, porous skeleton structure, and abundant surface functional groups. Hence, combining adsorption and photocatalytic decomposition, TiO2-biochar photocatalysts have received considerable attention and have been extensively studied. Owing to biochar's adsorption, more active sites and strong interactions between contaminants and photocatalysts can be achieved. The synergistic effect of biochar and TiO2 nanomaterials substantially improves the photocatalytic capacity for pollutant degradation. TiO2-biochar composites have numerous attractive properties and advantages, culminating in infinite applications. This review discusses the characteristics and preparation techniques of biochar, presents in situ and ex situ synthesis approaches of TiO2-biochar nanocomposites, explains the benefits of TiO2-biochar-based compounds for photocatalytic degradation, and emphasizes the strategies for enhancing the photocatalytic efficiency of TiO2-biochar-based photocatalysts. Finally, the main difficulties and future advancements of TiO2-biochar-based photocatalysis are highlighted. The review gives an exhaustive overview of recent progress in TiO2-biochar-based photocatalysts for organic contaminants removal and is expected to encourage the development of robust TiO2-biochar-based photocatalysts for sewage remediation and other environmentally friendly uses.

Comprehensive analysis of NiFe2O4/MWCNTs nanocomposite to degrade a healthcare waste - tetracycline

Tetracycline (TC), a commonly used antibiotic for studying bacterial illnesses in living organisms, poses a significant risk to the aquatic environment. Despite various conventional methods having been attempted to remove TC antibiotics from water solutions, they have not proven effective. Consequently, the focus of the research is on the photocatalytic degradation of TC. According to the research, MWCNTs were successfully incorporated into NiFe2O4 nanoparticles, which reduced the pace at which charge carriers recombined after joining with MWCNTs. Subsequently, the catalyst's efficacy was assessed in a batch reactor by analyzing the weight percentage change of the nanocomposite, the initial concentration of TC antibiotics, the effects of pH and contact time. The identical operational parameters were employed to investigate the degradation of TC using NiFe2O4 and MWCNTs as individual pure materials. The findings indicated that the photocatalytic process using NiFe2O4/MWCNTs achieved a degradation efficiency of 95.8% for TC at a pH value of 9. This result was obtained after a reaction time of 120 minutes, the concentration of TC solution was 10 mg L-1, with a nanocomposite dose of 0.6 g L-1 of TN 04 and 120 W m-2. The pseudo-first-order approach was used to estimate the rate at which TC degrades. After four consecutive uses, it was observed that the photocatalysts maintained their original properties, with only a slight decrease of approximately 2.4% in the removal efficiency. The study demonstrated that the NiFe2O4/MWCNTs nanocomposite exhibited considerable efficiency in degrading TC. Due to its simple manufacture and useful recovery, it has the potential to function well as a catalyst for the removal and degradation of pharmaceutical organic contaminants.

Bio-Inspired C/N/TiO2 Hybrid Composite Heterostructure: Enhanced Photocatalytic Activity under Visible Light

The hydrothermal treatment was used to create a natural hierarchical bio-inspired carbon and nitrogen-doped C/N/TiO2 hybrid composite. It is the goal of this work to investigate the photocatalytic activity of bio-inspired C/N/TiO2 hybrid composite. Techniques such as X-ray powder diffraction, scanning electron microscopy, UV-Vis absorption spectroscopy, FTIR, Raman, and photoluminescence spectroscopy were used to explore the structural, morphological, and photocatalysis characteristics of the bio-inspired C/N/TiO2 hybrid composite. By doping carbon and nitrogen, TiO2 nanotubes were able to improve the photocatalyst properties of the C/N/TiO2 hybrid composite, decrease the energy band gap (∼2.55 eV), and result in increased electron transfer efficiency when compared to pure TiO2. The photocatalytic degradation of pollutants (rhodamine B (RhB)) is made possible by the use of a bio-inspired C/N/TiO2 hybrid composite that has high interconnectivity and an easily accessible surface.

A reusable visible driven N and C-N doped TiO2 magnetic nanocomposites for photodegradation of direct red 16 azo dye in water and wastewater

The visible active N-doped TiO₂/ZnFe₂O₄ (urea-TiO₂/ZnFe₂O₄) and CN-codoped TiO₂/ZnFe₂O₄ (L-asparagine-TiO₂/ZnFe₂O₄) nanocomposites were successfully synthesized by the sol-gel-hydrothermal method for direct red 16 (DR16) photodegradation. Their properties of the prepared nanocomposites were analysed using XRD, FT-IR, FE-SEM, EDX, DRS and PL tests. The DRS and PL results confirmed a narrow band-gap energy and low recombination rate of photo-produced electron and hole pairs, respectively. The effect of adding various dopant agents (urea and L-asparagine) with different loadings and magnetic nanoparticle (ZnFe₂O₄) into TiO₂ sol on the photodegradation of DR16 was also evaluated. As a result, the L-asparagine (2 wt. %)-TiO₂/ZnFe₂O₄ is the best photocatalyst compared to the other modified TiO₂ nanocomposites due to its narrow band gap and high quantum efficiency. The catalyst concentration (1-2 g/L), DR16 concentration (25-45 ppm), initial pH (4-10), and irradiation time (30-90 min) as numerical variables were also considered for photocatalytic process analysis and moulding by central composite design (CCD). The increase in the pH and dye concentration reduces the photodegradation efficiency while irradiation time and catalyst concentration effectively improved its photodegradation efficiency. The DR16 was completely removed at 25 ppm of DR16, initial pH of 4 and 1.5 g/L of photocatalyst after 90-min irradiation. The photoactivity test was also repeated four times by reused L-asparagine-TiO₂/ZnFe₂O₄ photocatalyst at optimum conditions. The decrease of dye degradation and loss of photocatalyst were not significant which was approved by the good performance and high recovery capability of the prepared nanocomposite.

Artificial Solar Light-Driven APTES/TiO2 Photocatalysts for Methylene Blue Removal from Water

A visible-light photocatalytic performance of 3-aminopropyltriethoxysilane (APTES)-modified TiO2 nanomaterials obtained by solvothermal modification under elevated pressure, followed by calcination in an argon atmosphere at 800–1000 °C, is presented for the first time. The presence of silicon and carbon in the APTES/TiO2 photocatalysts contributed to the effective delay of the anatase-to-rutile phase transformation and the growth of the crystallites size of both polymorphous forms of TiO2 during heating. Thus, the calcined APTES-modified TiO2 exhibited higher pore volume and specific surface area compared with the reference materials. The change of TiO2 surface charge from positive to negative after the heat treatment increased the adsorption of the methylene blue compound. Consequently, due to the blocking of active sites on the TiO2 surface, the adsorption process negatively affected the photocatalytic properties. All calcined photocatalysts obtained after modification via APTES showed a higher dye decomposition degree than the reference samples. For all 3 modifier concentrations tested, the best photoactivity was noted for nanomaterials calcined at 900 °C due to a higher specific surface area than materials calcined at 1000 °C, and a larger number of active sites available on the TiO2 surface compared with samples annealed at 800 °C. It was found that the optimum concentration for TiO2 modification, at which the highest dye decomposition degree was noted, was 500 mM.

Effect of Calcination Conditions on the Properties and Photoactivity of TiO2 Modified with Biuret

A simple wet impregnation-calcination method was used to obtain a series of novel non-metal doped TiO2 photocatalysts. Biuret was applied as C and N source, while raw titanium dioxide derived from sulfate technology process was used as TiO2 and S source. The influence of the modification with biuret and the effect of the atmosphere (air or argon) and temperature (500–800 °C) of calcination on the physicochemical properties and photocatalytic activity of the photocatalysts towards ketoprofen decomposition under simulated solar light was investigated. Moreover, selected photocatalysts were applied for ketoprofen photodecomposition under visible and UV irradiation. Crucial features affecting the photocatalytic activity were the anatase to rutile phase ratio, anatase crystallites size and non-metals content. The obtained photocatalysts revealed improved activity in the photocatalytic ketoprofen decomposition compared to the crude TiO2. The best photoactivity under all irradiation types exhibited the photocatalyst calcined in the air atmosphere at 600 °C, composed of 96.4% of anatase with 23 nm crystallites, and containing 0.11 wt% of C, 0.05 wt% of N and 0.77 wt% of S.

Recent Progress on Metal-Enhanced Photocatalysis: A Review on the Mechanism

Metal-enhanced photocatalysis has recently received increasing interest, mainly due to the ability of metal to directly or indirectly degrade pollutants. In this review, we briefly review the recent breakthroughs in metal-enhanced photocatalysis. We discussed the recent progress of surface plasmon resonance (SPR) effect and small size effect of metal nanoparticles on photocatalysis; in particular, we focus on elucidating the mechanism of energy transfer and hot electron injection/transfer effect of metal nanoparticles and clusters while as photocatalysts or as cophotocatalysts. Finally, we discuss the potential applications of metal-enhanced photocatalysis, and we also offer some perspectives for further investigations.

C-,N- and S-Doped TiO2 Photocatalysts: A Review

This article presents an overview of the reports on the doping of TiO2 with carbon, nitrogen, and sulfur, including single, co-, and tri-doping. A comparison of the properties of the photocatalysts synthesized from various precursors of TiO2 and C, N, or S dopants is summarized. Selected methods of synthesis of the non-metal doped TiO2 are also described. Furthermore, the influence of the preparation conditions on the doping mode (interstitial or substitutional) with reference to various types of the modified TiO2 is summarized. The mechanisms of photocatalysis for the different modes of the non-metal doping are also discussed. Moreover, selected applications of the non-metal doped TiO2 photocatalysts are shown, including the removal of organic compounds from water/wastewater, air purification, production of hydrogen, lithium storage, inactivation of bacteria, or carbon dioxide reduction.

TiO2 modified orthocortical and paracortical cells having enhanced photocatalytic degradation and photoreduction properties

In this study, cortical cells resultant from wool fibers were loaded with TiO₂ nanoparticles in a hydrothermal process and were then engineered as organic-nonorganic hybrid composite photocatalysts for both photodegradation of organic dyes and photoreduction of heavy metal ions. The microstructure and photocatalytic properties of TiO₂ modified cortical cells (i.e. both orthocortical and paracortical cells) were systematically characterized using a series of analytical techniques including FESEM, TEM, element analysis, Mott-Schottky curve, BET specific surface area, Zeta potentials, as well as XRD, FTIR, XPS, DRS, PL, UPS, EDS and ESR spectra. Their photocatalytic performance and trapping experiments of the TiO₂ modified cortical cells were measured in the photodegradation of methylene blue (MB) dye and Congo Red (CR) dye as well as the photoreduction of Cr(VI) ions under visible light irradiation. It was found that anatase TiO₂ nanoparticles were chemically grafted on the surface of the two cortical cells via O-Ti⁴⁺/O-Ti³⁺ bonds, and that TiO₂ nanoparticles were formed inside the orthocortical cells in the hydrothermal process. The TiO₂ modified orthocortical and paracortical cells possessed much higher photocatalytic efficiency than the commercially available TiO₂ nanoparticle powder, Degussa P25, in the photodegradation of cationic MB dye and photoreduction of Cr(VI) ions, while their photocatalytic efficiency in the photodegradation of anionic CR dye is smaller because of their greater negative Zeta potentials and photogenerated holes as the main reactive radical species. In comparison with the TiO₂ modified paracortical cells, the higher photocatalytic efficiency of the TiO₂ modified orthocortical cells was demonstrated in the photodegradation of MB dye solution and this might be due to both the S-doped TiO₂ nanoparticles infiltrated into the naturally hydrophilic orthocortical cells and the primary reactive radical species of photogenerated holes being trapped in the cells.

Recent Progress on Metal-Enhanced Photocatalysis: A Review on the Mechanism

Metal-enhanced photocatalysis has recently received increasing interest, mainly due to the ability of metal to directly or indirectly degrade pollutants. In this review, we briefly review the recent breakthroughs in metal-enhanced photocatalysis. We discussed the recent progress of surface plasmon resonance (SPR) effect and small size effect of metal nanoparticles on photocatalysis; in particular, we focus on elucidating the mechanism of energy transfer and hot electron injection/transfer effect of metal nanoparticles and clusters while as photocatalysts or as cophotocatalysts. Finally, we discuss the potential applications of metal-enhanced photocatalysis, and we also offer some perspectives for further investigations.

Near infrared light activatable PEI-wrapped bismuth selenide nanocomposites for photothermal/photodynamic therapy induced bacterial inactivation and dye degradation

Inactivation of bacteria and degradation of organic pollutants by engineered nanomaterials (NMs) are very effective approaches in producing safe and clean drinking water.

One-step topological preparation of carbon doped and coated TiO2 hollow nanocubes for synergistically enhanced visible photodegradation activity

Various three-dimensional TiO₂ hollow structures have attracted strong scientific and technological attention due to their excellent properties. 3D hierarchical TiO₂ hollow nanocubes (TiO₂-HNBs) are not good candidates for industrial photocatalytic applications due to their large energy gap which is only activated by UV light. Herein, visible-light-responsive carbon doped and coated TiO₂-HNBs (C@TiO₂-HNBs) with a dominant exposure of {001} facets have been prepared via a template-engaged topotactic transformation process using facile one-step solvothermal treatment and a solution containing ethanol, glucose and TiOF₂. The effects of reaction time and glucose/TiOF₂ mass ratio on the structure and performance of C@TiO₂-HNBs were systematically studied. We found that glucose played an important role in providing H₂O during the topological transformation from self-templated TiOF₂ cubes into 3D hierarchical TiO₂ hollow nanocubes versus dehydration reactions, where its main function was as a carbon source. Coated carbon was deposited predominantly on the surface as sp² graphitic carbon in extended p conjugated graphite-like environments, and doped carbon mainly replaced Ti atoms in the surface lattice to form a carbonate structure. The results were confirmed using TEM SEM, EDS, XRD, FT-IR, XPS and Raman spectroscopic studies. The C@TiO₂-HNBs achieved greatly improved RhB photodegradation activity under visible light irradiation. The catalyst prepared with glucose/TiOF₂ at a mass ratio of 0.15 (T24-0.15) showed the highest photodegradation rate of 96% in 40 min, which is 7.0 times higher than those of the TiO₂-HNBs and P25. This new synthetic approach proposes a novel way to construct carbon hybridized 3D hierarchical TiO₂ hollow nanocubes by combining two modification methods, “element doped” and “surface sensitized”, at the same time.

Herein, visible-light-responsive carbon doped and coated TiO₂-HNBs have been prepared via a template-engaged topotactic transformation process.