Metal Sulfide Ion Exchangers: High Acid Stability of Na2xMg2y-xSn4-yS8 (NMS) and Topotactic Conversion to 2D Solid Acids with Semiconducting Character

Metal sulfide ion exchange materials (MSIEs) are of interest for nuclear waste remediation applications. We report the high stability of two structurally related metal sulfide ion exchange materials, Na2xMg2y-xSn4-yS8 (Mg-NMS) and Na2SnS3 (Na-NMS), in strongly acid media, in addition to the preparation of Na2xNi2y-xSn4-yS8 (Ni-NMS). Their formation progress during synthesis is studied with in-situ methods, with the target phases appearing in <15 min, reaction completion in <12 h, and high yields (75-80%). Upon contact with nitric or hydrochloric acid, these materials topotactically exchange Na+ for H+, proceeding in a stepwise protonation pathway for Na5.33Sn2.67S8. Na-NMS is stable in 2 M HNO3 and Mg-NMS is stable in 4 M HNO3 for up to 4 h, while both NMS materials are stable in 6 M HCl for up to 4 days. However, the treatment of Mg-NMS and Na-NMS with 2-6 M H2SO4 reveals a much slower protonation process since after 4 h of contact both NMS and HMS are present in the solution. The resultant protonated materials, H2xMg2y-xSn4-yS8 and H4x[(HyNay-1)1.33xSn4--1.33x]S8, are themselves solid acids and readily react with and intercalate a variety of organic amines, where the band gap of the resultant adduct is influenced by amine choice and can be tuned within the range of 1.88(5)-2.27(5) eV. The work function energy values for all materials were extracted from photoemission yield spectroscopy in air (PYSA) measurements and range from 5.47 (2) to 5.76 (2) eV, and the relative band alignments of the materials are discussed. DFT calculations suggest that the electronic structure of Na2MgSn3S8 and H2MgSn3S8 makes them indirect gap semiconductors with multi-valley band edges, with carriers confined to the [MgSn3S8]2- layers. Light electron effective masses indicate high electron mobilities.

Environmental application of three-dimensional graphene materials as adsorbents for dyes and heavy metals: Review on ice-templating method and adsorption mechanisms

The remediation of wastewater requires treatment technologies which are robust, efficient, simple to operate and affordable such as adsorption. Lately, three-dimensional (3D) graphene based materials have attracted significant attention as effective adsorbents for wastewater treatment. The intrinsic properties of 3D graphene structure such as large surface area and interconnected porous structure can facilitate the transport of pollutants into the 3D network and provide abundant active sites for trapping the pollutants. For the synthesis of 3D graphene structure, ice-templating is commonly practiced due to its facile steps, cost effectiveness and high scalability potential. This review covers the ice-templating fabrication technique for 3D graphene based materials and their application as adsorbents in eliminating dyes and heavy metals from aqueous media. The assembly mechanisms of the ice-templating fsynthesis are comprehensively discussed. Further discussion on the fundamental principles, critical process parameters and characteristics of ice-templated 3D graphene structures is also included. A thorough review on the mechanisms for batch adsorption of dyes and heavy metals is presented based on the structures and properties of the 3D graphene materials. The review further evaluates the dynamic adsorption in packed columns and the regeneration of 3D graphene based materials.

A type of thiophene-bridged silica aerogel with a high adsorption capacity for organic solvents and oil pollutants

Thiophene-bridged silica aerogel was prepared from tetraethyl orthosilicate (TEOS) and 2,5-divinyltrimethoxysilanethiophene (DVTHP) through a facile sol–gel reaction and ambient pressure drying process.