Hydrosilylation of Terminal Alkynes Catalyzed by an Air-Stable Manganese-NHC Complex

In recent years, catalysis with base metal manganese has received a significant amount of interest. Catalysis with manganese complexes having N-heterocyclic carbenes (NHCs) is relatively underdeveloped in comparison to the extensively investigated manganese catalysts possessing pincer ligands (particularly phosphine-based ligands). Herein, we describe the synthesis of two imidazolium salts decorated with picolyl arms (L₁ and L₂) as NHC precursors. Facile coordination of L₁ and L₂ with MnBr(CO)₅ in the presence of a base resulted in the formation manganese(I)-NHC complexes (1 and 2) as an air-stable solid in good isolated yield. Single-crystal X-ray analysis revealed the structure of the cationic complexes [Mn(CO)₃(NHC)][PF₆] with tridentate N,C,N binding of the NHC ligand in a facile fashion. Along with a few known manganese(I) complexes, these Mn(I)-NHC complexes 1 and 2 were tested for the hydrosilylation of terminal alkynes. Complex 1 was proved to be an effective catalyst for the hydrosilylation of terminal alkynes with good selectivity toward the less thermodynamically stable β-(Z)-vinylsilanes. This method provided good regioselectivity (anti-Markovnikov addition) and stereoselectivity (β-(Z)-product). Experimental evidence suggested that the present hydrosilylation pathway involved an organometallic mechanism with manganese(I)-silyl species as a possible reactive intermediate.

1,10-Phenanthroline-based periodic mesoporous organosilica: from its synthesis to its application in the cobalt-catalyzed alkyne hydrosilylation

1,10-Phenanthroline (Phen) is a typical ligand for metal complexation and various metal/Phen complexes have been applied as a catalyst in several organic transformations. This study reports the synthesis of a Phen-based periodic mesoporous organosilica (Phen-PMO) with the Phen moieties being directly incorporated into the organosilica framework. The Phen-PMO precursor, 3,8-bis[(triisopropoxysilyl)methyl]-1,10-phenanthroline (1a), was prepared via the Kumada-Tamao-Corriu cross-coupling of 3,8-dibromo-1,10-phenanthroline and [(triisopropoxysilyl)methyl]magnesium chloride. The co-condensation of 1a and 1,2-bis(triethoxysilyl)ethane in the presence of P123 as the template surfactant afforded Phen-PMO 3 with an ordered 2-D hexagonal mesoporous structure as confirmed by nitrogen adsorption/desorption measurements, X-ray diffraction, and transition electron microscopy. Co(OAc)₂ was immobilized on Phen-PMO 3, and the obtained complex showed good catalytic activity for the hydrosilylation reaction of phenylacetylene with phenylsilane.

Stereoselective Semi-Hydrogenations of Alkynes by First-Row (3d) Transition Metal Catalysts

The chemo- and stereoselective semi-hydrogenation of alkynes to alkenes is a fundamental transformation in synthetic chemistry, for which the use of precious 4d or 5d metal catalysts is well-established. In mankind's unwavering quest for sustainability, research focus has considerably veered towards the 3d metals. Given their high abundancy and availability as well as lower toxicity and noxiousness, they are undoubtedly attractive from both an economic and an environmental perspective. Herein, we wish to present noteworthy and groundbreaking examples for the use of 3d metal catalysts for diastereoselective alkyne semi-hydrogenation as we embark on a journey through the first-row transition metals.

Cobalt-Catalyzed Sequential Site- and Stereoselective Hydrosilylation of 1,3- and 1,4-Enynes

Catalytic sequential hydrosilylation of 1,3-enynes and 1,4-enynes promoted by cobalt complexes derived from bisphosphines are presented. Site- and stereoselective Si-H addition of primary silanes to 1,3-enynes followed by sequential intramolecular diastereo- and enantioselective Si-H addition afforded enantioenriched cyclic alkenylsilanes with simultaneous construction of a carbon-stereogenic center and a silicon-stereogenic center. Reactions of 1,4-enynes proceeded through sequential isomerization of the alkene moiety followed by site- and stereoselective hydrosilylation. A wide range of alkenylsilanes were afforded in high efficiency and selectivity. Functionalization of the enantioenriched silanes containing a stereogenic center at silicon delivered a variety of chiral building blocks that are otherwise difficult to access.

Cobalt-catalyzed alkyne hydrosilylation as a new frontier to selectively access silyl-hydrocarbons

The hydrosilylation of alkynes is a chief chemical method for accessing a range of alkenylsilanes, which can be derivatized to obtain value-added hydrocarbons and utilized in diverse applications. While noble metal-based catalytic procedures have shown great success in accessing vinylsilanes within the context of both academia and industry, replacing the noble metals with cheaper and more abundant base metals has recently drawn significant interest due to their catalytic sustainability and competencies including unprecedented reactivity that could expand chemical tools for accessing other types of silicon-containing hydrocarbons. During the past few years, a number of well-defined, robust cobalt-catalyst platforms that broadly operate either the Chalk-Harrod or a modified Chalk-Harrod mechanism have emerged as a new frontier in the field of selective alkyne hydrosilylation. This review describes the main features of cobalt catalyst systems recently documented for the hydrosilylation of alkynes with a strong emphasis on ligand design and reaction pathways involving Co-H and/or Co-silyl species-mediated elementary transformations to achieve Markovnikov/anti-Markovnikov hydrosilylations as well as new migratory transformations.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the β(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable β-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent β-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the β(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high β(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Transition-Metal-Catalyzed Stereo- and Regioselective Hydrosilylation of Unsymmetrical Alkynes

Alkyne hydrosilylation is one of the most efficient methods for the synthesis of alkenyl silicon derivatives and has been a hot topic of research for decades. This short review summarizes the progress in transition-metal-catalyzed stereo- and regioselective hydrosilylation of unsymmetrical alkynes. Topics are discussed based on different types of alkynes and the selectivities.

1 Introduction

2 Terminal Alkyne Hydrosilylation

2.1 β-E Selectivity

2.2 β-Z Selectivity

2.3 α-selectivity

3 Internal Alkyne Hydrosilylation

3.1 Aryl–Alkyl Acetylenes

3.2 Alkyl–Alkyl Acetylenes

3.3 Internal Alkynes with Polarized Substituents

4 Summary and Outlook

(Z)-Selective Hydrosilylation and Hydroboration of Terminal Alkynes Enabled by Ruthenium Complexes with an N-Heterocyclic Carbene Ligand

Metal-catalyzed trans-1,2-hydrosilylations and hydroborations of terminal alkynes that generate synthetically valuable (Z)-alkenylsilanes and (Z)-alkenylboranes remain challenging due to the (E)-selective nature of the reactions and the formation of the thermodynamically unfavorable (Z)-isomer. The development of new, efficient catalytic systems for the (Z)-selective hydrosilylation and hydroboration of terminal alkynes is thus highly desirable from a fundamental perspective as it would deepen our understanding of the metal-catalyzed (Z)-selective hydrosilylation and hydroboration of terminal alkynes. This personal account describes our research for developing a ruthenium complex that can efficiently catalyze the hydrosilylation and hydroboration of terminal alkynes, and for exploring the factors controlling (Z)-selectivity of the reactions. Our effort into the activation of B-protected boronic acids, R-B(dan) (dan=naphthalene-1,8-diaminato), that was believed not to participate in Suzuki-Miyaura cross-coupling, is also discussed.

Schiff Base Cobalt(II) Complex-Catalyzed Highly Markovnikov-Selective Hydrosilylation of Alkynes

A bench-stable cobalt(II) complex, with 3N-donor socket-type benzimidazole-imine-2H-imidazole ligand is reported as a precatalyst for regioselective hydrosilylation of terminal alkynes. Both aromatic and aliphatic alkynes could be effectively hydrosilylated with primary, secondary, and tertiary silane to give α-vinylsilanes in high yields with excellent Markovnikov selectivity and extensive functional-group tolerance. Catalyst loading varies within 0.5–0.05 mol %, which is one of the most efficient reported so far in the literature on cobalt-catalyzed alkyne hydrosilylation.

C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates

In this review article, we summarized recent advances in C–H hetero-functionalization of arenes through palladacyclopentane-type intermediates.

Supported Ni nanoparticles with a phosphine ligand as an efficient heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes

A convenient and effective heterogeneous non-noble metal catalytic system for regioselective hydrosilylation of alkynes was successfully developed by the combination of Ni/Al2O3 with a xantphos ligand. The resulting catalytic system displayed excellent catalytic performance in the heterogeneous hydrosilylation of PhSiH3 with a wide range of aromatic and aliphatic terminal alkynes, affording the corresponding (E)-vinylsilanes in good to excellent yields with high regioselectivity.

Iron-Catalyzed Regiodivergent Alkyne Hydrosilylation

Although tremendous effort has been devoted to the development of methods for iron catalysis, few of the catalysts reported to date exhibit clear superiority to other metal catalysts, and the mechanisms of most iron catalysis remain unclear. Herein, we report that iron complexes bearing 2,9-diaryl-1,10-phenanthroline ligands exhibit not only unprecedented catalytic activity but also unusual ligand-controlled divergent regioselectivity in hydrosilylation reactions of various alkynes. The hydrosilylation protocol described herein provides a highly efficient method for preparing useful di- and trisubstituted olefins on a relatively large scale under mild conditions, and its use markedly improved the synthetic efficiency of a number of bioactive compounds. Mechanistic studies based on control experiments and density functional theory calculations were performed to understand the catalytic pathway and the observed regioselectivity.

Efficient and selective alkene hydrosilation promoted by weak, double Si-H activation at an iron center

Cationic iron complexes [Cp*(ⁱPr₂MeP)FeH₂SiHR]⁺, generated and characterized in solution, are very efficient catalysts for the hydrosilation of terminal alkenes and internal alkynes by primary silanes at low catalyst loading (0.1 mol%) and ambient temperature.

Cationic iron complexes [Cp*(ⁱPr₂MeP)FeH₂SiHR]⁺, generated and characterized in solution, are very efficient catalysts for the hydrosilation of terminal alkenes and internal alkynes by primary silanes at low catalyst loading (0.1 mol%) and ambient temperature. These reactions yield only the corresponding secondary silane product, even with SiH₄ as the substrate. Mechanistic experiments and DFT calculations indicate that the high rate of hydrosilation is associated with an inherently low barrier for dissociative silane exchange (product release).

Cobalt-Catalyzed Regio- and Stereoselective Hydroboration of Allenes

An efficient pincer-ligand-based cobalt-complex-catalyzed allene hydroboration affording Z-allylic boronates is described. The reaction demonstrates an excellent regio- as well as Z-stereoselectivity and a wide substrate scope that tolerates many functional groups. Based on solvent-assisted electrospray ionization mass spectrometry (SAESI-MS) studies, a rationale for the cobalt-catalyzed hydroboration involving the highly selective insertion of an allene into the Co-H bond to form Z-allylic cobalt intermediates is proposed.

Ligand-controlled cobalt-catalyzed regiodivergent hydroboration of aryl,alkyl-disubstituted internal allenes

We report a stereoselective regiodivergent hydroboration of aryl,alkyl-disubstituted internal allenes with pinacolborane (HBpin) in the presence of cobalt catalysts generated from bench-stable Co(acac)2 and bisphosphine ligands. An interesting correlation between the regioselectivity of this hydroboration and the bite angles of bisphosphine ligands was identified. When hydroboration was conducted with cobalt catalysts containing bisphosphines with medium bite angles (e.g. 98° for dppb and 96° for dppf), HBpin was selectively added to the alkyl-substituted double bond. However, HBpin was selectively added to the aryl-substituted double bond when the reactions were conducted with cobalt catalysts containing bisphosphines with large bite angles (e.g. 111° for xantphos and 114° for Nixantphos). A range of internal allenes underwent these Co-catalyzed hydroboration reactions in a regiodivergent manner to yield the corresponding (Z)-alkenylboronates in high isolated yields and with high regioselectivity. These reactions show good functional group compatibility and can be readily scaled up to gram scales without using a dry box. In addition, the comparison of regioselectivity between the Co-catalyzed hydrosilylation and hydroboration reactions of the same allene substrate suggests that this Co-catalyzed regiodivergent hydroboration of allenes proceeds through a Co-Bpin intermediate. Deuterium-labeling experiments suggest that the Co-Bpin intermediates react with allenes to form allylcobalt species which then react with HBpin to release (Z)-alkenylboronate products.

Dehydroalkylative Activation of CNN- and PNN-Pincer Ruthenium Catalysts for Ester Hydrogenation

Ruthenium-pincer complexes bearing CNN- and PNN-pincer ligands with diethyl- or diisopropylamino side groups, which have previously been reported to be active precatalysts for ester hydrogenation, undergo dehydroalkylation on heating in the presence of tricyclohexylphosphine to release ethane or propane, giving five-coordinate ruthenium(0) complexes containing a nascent imine functional group. Ethane or propane is also released under the conditions of catalytic ester hydrogenation, and time-course studies show that this release is concomitant with the onset of catalysis. A new PNN-pincer ruthenium(0)-imine complex is a highly active catalyst for ester hydrogenation at room temperature, giving up to 15 500 turnovers with no added base. This complex was shown to react reversibly at room temperature with two equivalents of hydrogen to give a ruthenium(II)-dihydride complex, where the imine functionality has been hydrogenated to give a protic amine side group. These observations have potentially broad implications for the identities of catalytic intermediates in ester hydrogenation and related transformations.

Selective carbonylation of benzene to benzaldehyde using a phosphorus–nitrogen PN3P–rhodium(i) complex

A PN³P–Rh(i) complex realizes the selective carbonylation of benzene to benzaldehyde without irradiation.

POCN Ni(ii) pincer complexes: synthesis, characterization and evaluation of catalytic hydrosilylation and hydroboration activities

(POCN)Ni(ii) complexes were found to mediate a variety of carbonyl hydroboration reactions, including chemoselective hydroboration of benzaldehyde and hydroborative reduction of amides.

Porous Organic Polymer as a Heterogeneous Ligand for Highly Regio- and Stereoselective Nickel-Catalyzed Hydrosilylation of Alkyne

A porous organic polymer (POL-Xantphos) was synthesized and employed as a heterogeneous ligand for selective hydrosilylation of alkynes. It exhibits high selectivity and catalytic efficiency toward a broad range of alkynes. Owing to the confinement effect of the micropore structure, POL-Xantphos was far superior to the monomeric Xantphos ligands in controlling the selectivity. By performing hydrosilylation in a flow reactor system, separation and regeneration of the Ni/POL-Xantphos catalyst are easily achieved without any loss in selectivity or activity.

Regiocontrol in the cobalt-catalyzed hydrosilylation of alkynes

A highly versatile cobalt-catalyzed hydrosilylations of alkynes is reported. Near-perfect regiocontrol/stereocontrol was induced by the choice of the ligand: bidentate phosphines afforded (E)-β-vinylsilanes; α-vinylsilanes formed with bipyridine ligands.

Hydrofunctionalizations of unsaturated hydrocarbons are key strategies for the synthesis of functionalized building blocks. Here, we report highly versatile cobalt-catalyzed hydrosilylations of alkynes that operate with minute amounts of the inexpensive, bench-stable pre-catalyst Co(OAc)₂·4H₂O under mild conditions (0.1–1 mol%, THF, r.t., 1 h). Near-perfect regiocontrol/stereocontrol was induced by the choice of the ligand: bidentate phosphines afforded (E)-β-vinylsilanes; α-vinylsilanes formed with bipyridine ligands.

An NNN-Pincer-Cobalt Complex Catalyzed Highly Markovnikov-Selective Alkyne Hydrosilylation

A new NNN pincer (amine-pyridine-imine, API) cobalt complex, which is bench-stable and is applicable for the highly efficient and regioselective hydrosilylation of terminal alkynes, is developed. A broad set of α-vinylsilanes was successfully synthesized in good to high yields with up to 98/2 Markovnikov regioselectivity. This protocol can be readily scaled up for gram-scale synthesis and demonstrates the most efficient cobalt-catalyzed hydrosilylation of alkynes with turnover frequencies as high as 126 720 h^-1 to date.

Highly β( Z)-Selective Hydrosilylation of Terminal Alkynes Catalyzed by Thiolate-Bridged Dirhodium Complexes

A series of novel monothiolate-bridged dirhodium complexes, [Cp*Rh(μ-SR)(μ-Cl)₂RhCp*][BF₄] {Cp* = η⁵-C₅Me₅, R = tertiary butyl ( ^tBu), 1a; R = ferrocenyl (Fc), 1b; R = adamantyl (Ad), 1c} were designed and successfully synthesized, which can smoothly facilitate highly regioselective and stereoselective hydrosilylation of terminal alkynes to afford β( Z) vinylsilanes with good functional group compatibility. Furthermore, the hydride bridged dirhodium complex [Cp*Rh(μ-S ^tBu)(μ-Cl)(μ-H)RhCp*][BF₄] (5) as a potential intermediate was obtained by the reaction of 1a with excess HSiEt₃.

Ruthenium carbonyl complexes with pyridylalkanol ligands: synthesis, characterization and catalytic properties for aerobic oxidation of secondary alcohols

Several new trinuclear ruthenium carbonyl complexes were synthesized and their application in aerobic oxidation of secondary alcohols was also established.

Regio-selective and stereo-selective hydrosilylation of internal alkynes catalyzed by ruthenium complexes

In this study, ruthenium(ii)-catalyzed direct hydrosilylation of internal alkynes with high regio-selectivity and stereo-selectivity is reported. This title transformation led to various vinylsilanes in good to excellent yields. This approach features mild reaction conditions, low catalyst loading, air-stability, and good functional group tolerance. Furthermore, gram-scale preparation and some transformations of vinylsilanes were carried out, which further underscored its synthetic utility and applicability.

In this study, ruthenium(ii)-catalyzed direct hydrosilylation of internal alkynes with high regio-selectivity and stereo-selectivity is reported.

Sodium triethylborohydride as a catalyst for the dehydrogenative silylation of terminal alkynes with hydrosilanes

Sodium triethylborohydride has been found to be a highly selective catalyst for the dehydrogenative silylation of aromatic and aliphatic alkynes with hydrosilanes.

Fifty Years of Hydrosilylation in Polymer Science: A Review of Current Trends of Low-Cost Transition-Metal and Metal-Free Catalysts, Non-Thermally Triggered Hydrosilylation Reactions, and Industrial Applications

Hydrosilylation reactions, the (commonly) anti-Markovnikov additions of silanes to unsaturated bonds present in compounds such as alkenes and alkynes, offer numerous unique and advantageous properties for the preparation of polymeric materials, such as high yields and stereoselectivity. These reactions require to be catalyzed, for which platinum compounds were used in the initial stages. Celebrating the 50th anniversary of hydrosilylations in polymer science and, concomitantly, five decades of continuously growing research, hydrosilylation reactions have advanced to a level that renders them predestined for transfer into commercial products on the large scale. Facing this potential transfer, this review addresses and discusses selected current trends of the scientific research in the area, namely low-cost transition metal catalysts (focusing on iron, cobalt, and nickel complexes), metal-free catalysts, non-thermally triggered hydrosilylation reactions (highlighting stimuli such as (UV-)light), and (potential) industrial applications (highlighting the catalysts used and products manufactured). This review focuses on the hydrosilylation reactions involving alkene reactants.