Magnetic molecularly imprinted polymers using ternary deep eutectic solvent as novel functional monomer for hydroxytyrosol separation

In this work, magnetic molecularly imprinted polymers (MIPs) for specific recognition of Hydroxytyrosol (HT) were designed by vinyl-modified magnetic particles (Fe3O4@SiO2@VTEOs) as carrier, ternary deep eutectic solvent (DES) as functional monomer, while ethylene glycol dimethacrylate (EGDMA) as crosslinker. The optimum amount of DES was obtained by adsorption experiments (molar ratio, caffeic acid: choline chloride: formic acid = 1:6:3) which were 140 μL in total. Under the optimized amount of DES, the maximum adsorption capacity of the MIPs particles was 42.43 mg g-1, which was superior to non-imprinted polymer (4.64 mg g-1) and the imprinting factor (IF) is 9.10. Syringin and Oleuropicrin were used as two reference molecules to test the selectivity of the DES-MIPs particles. The adsorption capacity of HT was 40.11 mg g-1. Three repeated experiments show that the polymer has high stability and repeatability (RSD = 5.50).

Emerging trends in sensors based on molecular imprinting technology: Harnessing smartphones for portable detection and recognition

Molecular imprinting technology (MIT) has become a promising recognition technology in various fields due to its specificity, high efficiency, stability and eco-friendliness in the recognition of target. Molecularly imprinted polymers (MIPs), known as 'artificial receptors', are shown similar properties to natural receptors as a biomimetic material. The selectivity of recognition for targets can be greatly improved when MIPs are introduced into sensors, as known that MIPs, are suitable for the pretreatment and analysis of trace substances in complex matrix samples. At present, various sensors has been developed by the combination with MIPs for detecting and identifying trace compounds, biological macromolecules or other substances, such as optical, electrochemical and piezoelectric sensors. Smart phones, with their built-in sensors and powerful digital imaging capabilities, provide a unique platform for the needs of portability and instant detection. MIP sensors based on smart phones are expected to become a new research direction in the future. This review discusses the latest applications of MIP sensors in the field of detection and recognition in recent years, summarizes the frontier progress of MIP sensor research based on smart phones in the past two years, and points out the challenges, limitations and future development prospects.

Advances in solid-phase extraction techniques: Role of nanosorbents for the enrichment of antibiotics for analytical quantification

Antibiotics are life-saving medications for treating bacterial infections; however it has been discovered that resistance developed by bacteria against these incredible agents is the primary contributing factor to rising global mortality rates. The fundamental cause of the emergence of antibiotic resistance in bacteria is the presence of antibiotic residues in various environmental matrices. Although antibiotics are present in diluted form in environmental matrices like water, consistent exposure of bacteria to these minute levels is enough for the resistance to develop. So, identifying these tiny concentrations of numerous antibiotics in various and complicated matrices will be a crucial step in controlling their disposal in those matrices. Solid phase extraction, a popular and customizable extraction technology, was developed according to the aspirations of the researchers. It is a unique alternative technique that could be implemented either alone or in combination with other approaches at different stages because of the multitude of sorbent varieties and techniques. Initially, sorbents are utilized for extraction in their natural state. The basic sorbent has been modified over time with nanoparticles and multilayer sorbents, which have indeed helped to accomplish the desired extraction efficiencies. Among the current traditional extraction techniques such as liquid-liquid extraction, protein precipitation, and salting out techniques, solid-phase extractions (SPE) with nanosorbents are most productive because, they can be automated, selective, and can be integrated with other extraction techniques. This review aims to provide a broad overview of advancements and developments in sorbents with a specific emphasis on the applications of SPE techniques used for antibiotic detection and quantification in various matrices in the last two decades.

Analysis of anticancer compound, indole-3-carbinol, in broccoli using a new ultrasound-assisted dispersive-filter extraction method based on poly(deep eutectic solvent)-graphene oxide nanocomposite

Indole-3-carbinol (I3C), an important anticancer compound found in broccoli, has attracted considerable attention. The rapid extraction and accurate analysis of I3C in the pharmaceutical industry in broccoli is challenging as I3C is unstable at low pH and high temperature. In this study, a rapid, accurate, and low-cost ultrasound-assisted dispersive-filter extraction (UADFE) technique based on poly(deep eutectic solvent)-graphene oxide (PDES-GO) adsorbent was developed for the isolation and analysis of I3C in broccoli for the first time. PDES-GO with multiple adsorption interactions and a fast mass transfer rate was synthesized to accelerate adsorption and desorption. UADFE was developed by combining dispersive solid-phase extraction (DSPE) and filter solid-phase extraction (FSPE) to realize rapid extraction and separation. Based on the above two strategies, the proposed PDES-GO-UADFE method coupled with high-performance liquid chromatography (HPLC) allowed the rapid (15-16 min), accurate (84.3%-96.4%), and low-cost (adsorbent: 3.00 mg) analysis of I3C in broccoli and was superior to solid-phase extraction, DSPE, and FSPE methods. The proposed method showed remarkable linearity (r=0.9998; range: 0.0840-48.0 μg/g), low limit of quantification (0.0840 μg/g), and high precision (relative standard deviation ≤5.6%). Therefore, the PDES-GO-UADFE-HPLC method shows significant potential in the field of pharmaceutical analysis for the separation and analysis of anti-cancer compounds in complex plant samples.

Computational modeling, fabrication, and characterization of the deep eutectic solvent-based green molecular cage for selective metronidazole extraction from plasma followed by UHPLC with diode array detector determination

Four ternary deep eutectic solvents were computationally designed and synthesized, being used as candidate functional monomers in metronidazole molecular imprinting polymer synthesis, allowing selective extraction and determination by ultra high performance liquid chromatography with diode array detection. In terms of metronidazole selective extraction, the best results were obtained by (deep eutectic solvent)₂ :(ethylene glycol dimethacrylate)₁₁ , in which deep eutectic solvent is the functional monomer constructed by combining three components in 6:6:2 ratios of choline chloride:ethylene glycol:methacrylic acid. The effects of different parameters on molecular imprinted solid-phase extraction of metronidazole were thoroughly explored through screening design and response surface methodology. The adsorption mechanism findings show that the adsorption data are primarily fitted on the Freundlich model based on higher correlation coefficient. Kinetic experiments have shown that the mechanism of adsorption fits the pseudo-second-order model. The best extraction recovery (96.5%) was obtained in 25-min elution time, desorption temperature of 40°C, and 1.0 mL ACN as eluent. Metronidazole was measured by a validated ultra high performance liquid chromatography with diode array detection method. The calibration of the method was linear in the range of 0.1-10 μg/mL with limits of detection and quantification of 0.03 and 0.1 μg/mL, respectively. The method was successfully applied for the determination of metronidazole in human plasma.

Selective separation and inexpensive purification of paclitaxel based on molecularly imprinted polymers modified with ternary deep eutectic solvents

Paclitaxel (PTX) is a powerful anticancer natural product, with its separation and purification having been widely studied. In this work, new molecular imprinted polymers (MIPs) using deep eutectic solvents (DESs) with different molar ratios were prepared as functional monomers. These were then used as adsorbents in solid phase extraction (SPE) for the separation of PTX from its structural analogs. The polymers were characterized by energy disperive X-rays (EDX), scanning electron microscopy (SEM), thermogravimetric analysis (TGA) and fourier transform infrared spectroscopy (FT-IR). The results suggested that the formative regular DES-MIPs had an even pore-size distribution and a large specific surface area. The dynamic adsorption and static adsorption showed that the DES-MIPs had excellent adsorption performance, with a maximum adsorption capacity and optimum adsorption time of 87.08 mg/g and 180 min, respectively. The selective adsorption experiments showed that the material had outstanding selectivity, and the maximum selectivity factor was 6.20. For stability, after six consecutive adsorption and desorption cycles, the DES-MIPs maintained the perfect stability and reusability. Furthermore, the fabricated SPE column was successfully utilized for extracting and eluting PTX. This study provides a reliable protocol for the separation and purification PTX from its structural analogs and the DES-MIPs materials have excellent potential application value in pharmaceutical industry.

Involvement of Deep Eutectic Solvents in Extraction by Molecularly Imprinted Polymers—A Minireview

Substantial research activity has been focused on new modes of extraction and refining processes during the last decades. In this field, coverage of the recovery of bioactive compounds and the role of green solvents such as deep eutectic solvents (DESs) also gradually increases. A specific field of DESs involvement is represented by molecularly imprinted polymers (MIPs). The current state and prospects of implementing DESs in MIPs chemistry are, based on the accumulated experimental data so far, evaluated and discussed in this minireview.

Preparation of levofloxacin-imprinted nanoparticles using designed deep eutectic solvents for the selective removal of levofloxacin pollutants from environmental waste water

Designed deep eutectic solvents was applied to preparation of levofloxacin-imprinted nanoparticles as functional monomer. The nanoparticles using for the selective removal of levofloxacin pollutants from a natural environmental system.

Polymer Science and Engineering Using Deep Eutectic Solvents

The green and versatile character of deep eutectic solvents (DES) has turned them into significant tools in the development of green and sustainable technologies. For this purpose, their use in polymeric applications has been growing and expanding to new areas of development. The present review aims to summarize the progress in the field of DES applied to polymer science and engineering. It comprises fundamentals studies involving DES and polymers, recent applications of DES in polymer synthesis, extraction and modification, and the early developments on the formulation of DES–polymer products. The combination of DES and polymers is highly promising in the development of new and ‘greener’ materials. Still, there is plenty of room for future research in this field.

Microextraction by Packed Molecularly Imprinted Polymer Combined Ultra-High-Performance Liquid Chromatography for the Determination of Levofloxacin in Human Plasma

Fluoroquinolones are considered as gold standard for the prevention of bacterial infections. To improve assessment of antibacterial efficacy, a novel method for determination of levofloxacin was developed and validated. Deep eutectic solvents (DESs) as only green solvent were used as a porogen for preparation of water-compatible molecularly imprinted polymers (MIPs) with a pseudotemplate. The DESs-MIPs were characterized in detail, including scanning electron microscope, nitrogen sorption porosimetry, and Fourier transform-infrared spectra. Clearly, the maximum binding capacity of levofloxacin on DESs-MIPs in water and methanol was 0.216 and 0.077 μmol g−1, respectively. The DESs-MIPs as adsorbing materials were applied in microextraction by packed sorbent (MEPS), and the DESs-MIPs-MEPS conditions were optimized. The DESs-MIPs-MEPS coupled with ultra-high-performance liquid chromatography (UHPLC) was used to determine levofloxacin in human plasma. The method was found linear over 0.05–10 μg mL−1 with coefficient of correlation equal to 0.9988. The limit of detection and limit of quantification were 0.012 and 0.04 μg mL−1, respectively. At three spiked levels, the precision of proposed method was between 95.3% and 99.7% with intraday and interday relative standard deviations ≤8.9%. Finally, the developed method was used to examine levofloxacin from human plasma of 20 hospitalized patients after transrectal ultrasound-guided prostate biopsy, and the average concentration (±SD) of levofloxacin was 2.35 ± 0.99 μg mL−1 in plasma.

Preparation of two-dimensional magnetic molecularly imprinted polymers based on boron nitride and a deep eutectic solvent for the selective recognition of flavonoids

Two-dimensional (2D) boron nitride (BN) were developed as a 2D scaffold material in preparation of magnetic molecularly imprinted polymers (MMIPs).

Recent advances in green reagents for molecularly imprinted polymers

Molecularly imprinted polymers (MIPs) are tailor-made materials with special binding sites.

Application of novel ternary deep eutectic solvents as a functional monomer in molecularly imprinted polymers for purification of levofloxacin

A series of ecofriendly ternary deep eutectic solvents (DESs) with different molar ratios were prepared as candidate functional monomers. Three of the optimal ternary DESs as functional monomers were applied to the preparation of molecularly imprinted polymers (MIPs). After synthesis, the proposed polymers were characterized by elemental analysis (EA), scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Brunauer-Emmett-Teller surface area measurements (BET) and Fourier transform infrared spectroscopy (FT-IR). These MIPs based on ternary DESs with different molar ratios exhibited different absorption capacities of levofloxacin. A sample of levofloxacin (500ng) was dissolved in a millet extractive (10mL). All MIPs were used as SPE adsorbents to purify the extracts. According to characterization result, the ternary DES-3 (1:3:1.5) was joined in the synthetic process of MIP-1. The green ternary DES-3-based MIPs had the best selectivity recovery for levofloxacin (91.4%) from the millet extractive. The best selectivity of MIP-1 was attributed to the novel monomer (ternary DES) in the preparation of the materials. Overall, ternary DES-based MIPs have potential applications as media in many research areas.