Tailoring structural and optical properties of ZnO system through elemental Mn Doping through First-principles calculations

In this study, band structure and optical properties of Manganese (Mn) doped ZnO are investigated adopting first-principles study calculations. It is observed that, by addition of Mn in ZnO crystal, the electrical properties like conductivity and dielectric function of material have been improved. The elastic constants for the elements are also calculated which shows that the element is stable after addition of dopant. The computational study is done on CASTEP and Material Studio. The ZnO system is simulated and atoms of Mn has been added replacing Zn atoms. The properties that studied are band structure and optics including conductivity, reflectivity, dielectric function, absorption and refractive index. Furthermore, this study also includes calculation of Elastic constants, XRD Spectra, Phonon dispersion and Temperature profile of doped ZnO systems. The computational study produced promising results and experimental approach can be adopted to reinforce the outcomes of this study.

First-Principles Calculations with Six Structures of Alkaline Earth Metal Cyanide A(CN)2 (A = Be, Mg, Ca, Sr, and Ba): Structural, Electrical, and Phonon Properties

This work examines six structures (P4̅3m, P4₂ nm, R3m, P2₁/c, R3̅m, and C2/m) of alkaline earth metal cyanide A(CN)₂ (A = Be, Mg, Ca, Sr, and Ba) using first-principles calculations. The symmetries of P4̅3m, P4₂ nm, and R3m reflect a variation of Pn3̅m, previously reported as occurring on Be(CN)₂ and Mg(CN)₂ in X-ray diffraction studies, while the symmetries of P2₁/c, R3̅m, and C2/m were selected from the P3̅m1 symmetry found using Mg(OH)₂ as the initial structures, with -OH being replaced by -CN. The band structure, density of states, and phonon properties of all A(CN)₂ structures were then investigated using density functional theory (DFT), with a generalized gradient approximation (GGA) applied for the exchange and correlation energy values. The simulation results for the phonon spectra indicate that the stable structures are Be(CN)₂ (P4̅3m, P4₂ nm, and C2/m), Mg(CN)₂ (P4̅3m, P4₂ nm, and C2/m), Ca(CN)₂ (P2₁/c), Sr(CN)₂ (P2₁/c and R3̅m), and Ba(CN)₂ (R3̅m) at 0 GPa. For the effects of high pressure, Ca(CN)₂ and Sr(CN)₂ were thus found to be stable as C2/m at pressures above 10 and 3 GPa, respectively, while Ca(CN)₂ is as stable as R3̅m above 15 GPa. In the calculated band structures, all of the compounds with the C2/m structure demonstrated good conductivity, while the other structures have a band gap range of 2.83-6.33 eV.

Theoretical Investigation of Carbon Dioxide Adsorption on Li+-Decorated Nanoflakes

Recently, the capture of carbon dioxide, the primary greenhouse gas, has attracted particular interest from researchers worldwide. In the present work, several theoretical methods have been used to study adsorption of CO2 molecules on Li+-decorated coronene (Li+@coronene). It has been established that Li+ can be strongly anchored on coronene, and then a physical adsorption of CO2 will occur in the vicinity of this cation. Moreover, such a decoration has substantially improved interaction energy (Eint) between CO2 molecules and the adsorbent. One to twelve CO2 molecules per one Li+ have been considered, and their Eint values are in the range from -5.55 to -16.87 kcal/mol. Symmetry-adapted perturbation theory (SAPT0) calculations have shown that, depending on the quantity of adsorbed CO2 molecules, different energy components act as the main reason for attraction. AIMD simulations allow estimating gravimetric densities (GD, wt.%) at various temperatures, and the maximal GDs have been calculated to be 9.3, 6.0, and 4.9% at T = 77, 300, and 400 K, respectively. Besides this, AIMD calculations validate stability of Li+@coronene complexes during simulation time at the maximum CO2 loading. Bader's atoms-in-molecules (QTAIM) and independent gradient model (IGM) techniques have been implemented to unveil the features of interactions between CO2 and Li+@coronene. These methods have proved that there exists a non-covalent bonding between the cation center and CO2. We suppose that findings, derived in this theoretical work, may also benefit the design of novel nanosystems for gas storage and delivery.

Effect of the number of nitrogen dopants on the electronic and magnetic properties of graphitic and pyridinic N-doped graphene - a density-functional study

Doping with nitrogen atom is an effective way to modify the electronic and magnetic properties of graphene. In this paper, we studied the effect of the number of dopant atoms on the electronic and magnetic properties of the two most common nitrogen bond configurations in N-doped graphene, that is, graphitic and pyridinic, using density functional theory (DFT). We found that the formation of graphitic and pyridinic configurations can initiate the transition of the electronic properties of graphene from semimetal to metal with n-type conductivity for the graphitic configuration and p-type conductivity for the pyridinic configuration. The formation of a bandgap-like structure was observed in both configurations. The bandgap increased with the increase in the number of dopant atoms. We also observed that the formation of graphitic configuration did not cause a transition to the magnetic properties of graphene even though the number of dopant atoms was increased. In the pyridinic configuration, the increase in the number of dopant atoms caused graphene to be paramagnetic, with the remarkable total magnetic moment of 0.400 μ_B per cell in the pyridinic-N₃ model. This study provides a deeper understanding of the modification of electronic and magnetic properties of N-doped graphene by controlling the bond configuration and the number of nitrogen dopants.

The number of dopant atoms is a parameter that can effectively tune the electronic and magnetic properties of graphitic and pyridinic N-doped graphene.

Tailoring spintronic and opto-electronic characteristics of bilayer AlN through MnO x clusters intercalation; an ab initio study

Adopting ab initio density functional theory (DFT) technique, the spintronic and opto-electronic characteristics of MnO x (i.e., Mn, MnO, MnO2, MnO3 and MnO4) clusters intercalated bilayer AlN (BL/AlN) systems are investigated in this paper. In terms of electron transfer, charge transfer occurs from BL/AlN to the MnO x clusters. MnO x clusters intercalation induces magnetic behavior in the non-magnetic AlN system. The splitting of electronic bands occurs, thus producing spintronic trends in the electronic structure of BL/AlN system. Further, MnO x intercalation converts insulating BL/AlN to a half metal/semiconductor material during spin up/down bands depending upon the type of impurity cluster present in its lattice. For instance, Mn, MnO and MnO2 intercalation in BL/AlN produces a half metallic BL/AlN system as surface states are available at the Fermi Energy (E F) level for spin up and down band channels, accordingly. Whereas, MnO3 and MnO4 intercalation produces a conducting BL/AlN system having a 0.5 eV and 0.6 eV band gap during the spin down band channel, respectively. During spin up band channels these systems behave as semiconductors with band gaps of 1.4 eV and 1.2 eV, respectively. In terms of optical characteristics (i.e., absorption coefficient, reflectivity and energy loss spectrum (ELS)), it was found that MnO x intercalation improves the absorption spectrum in the low electron energy range and absorption peaks are observed in the 0-3 eV energy range, which are not present in the absorption spectrum of pure BL/AlN. The static reflectivity parameter of BL/AlN is increased after MnO x intercalation and the ELS parameter obtains significant peak intensities in the 0-2 eV energy range, whereas for pure BL/AlN, ELS contains negligible value in this energy range. Outcomes of this study indicate that, MnO x clusters intercalation in BL/AlN is a suitable technique to tailor its spintronic and opto-electronic trends. Thus, experimental investigation can be carried out on the systems discussed in this work, so as to fabricate practical layered AlN systems that are functional in the field of nano-technology.

Alkaline earth atom doping-induced changes in the electronic and magnetic properties of graphene: a density functional theory study

Density functional theory was used to investigate the effects of doping alkaline earth metal atoms (beryllium, magnesium, calcium and strontium) on graphene. Electron transfer from the dopant atom to the graphene substrate was observed and was further probed by a combined electron localization function/non-covalent interaction (ELF/NCI) approach. This approach demonstrates that predominantly ionic bonding occurs between the alkaline earth dopants and the substrate, with beryllium doping having a variant characteristic as a consequence of electronegativity equalization attributed to its lower atomic number relative to carbon. The ionic bonding induces spin-polarized electronic structures and lower workfunctions for Mg-, Ca-, and Sr-doped graphene systems as compared to the pristine graphene. However, due to its variant bonding characteristic, Be-doped graphene exhibits non-spin-polarized p-type semiconductor behavior, which is consistent with previous works, and an increase in workfunction relative to pristine graphene. Dirac half-metal-like behavior was predicted for magnesium doped graphene while calcium doped and strontium doped graphene were predicted to have bipolar magnetic semiconductor behavior. These changes in the electronic and magnetic properties of alkaline earth doped graphene may be of importance for spintronic and other electronic device applications.