Simultaneous Removal of SO2 and NO by O3 Oxidation Combined with Seawater as Absorbent

Aiming at NOx (NO 90%, NO2 10%) and SO2 in simulated vessel emissions, denitration and desulfurization were studied through ozone oxidation combined with seawater as absorbent. Specifically, the different influencing factors of denitration and desulfurization were analyzed. The results indicated that the oxidation efficiency of NO can reach over 90% when the molar ratio of O3/NO is 1.2. Ozone oxidation and seawater washing in the same unit can decrease the temperature of ozone oxidation of NO, avoid high temperature ozone decomposition, and enhance the oxidation efficiency of NO. When NO inlet initial concentration is lower than 800 ppm, the NOx removal efficiency can be improved by increasing NO inlet concentration, and when NO inlet initial concentration is greater than 800 ppm, increasing the concentration of NO would decrease the NOx removal efficiency. Increasing the inlet concentration of SO2 has minor effect on desulfurization, but slightly reduces the absorption efficiency of NOx due to the competition of SO2 and NOx in the absorption solution. Besides, final products (NO2−, NO3−, SO32−, and SO42−) were analyzed by the ion chromatography.

Simultaneous removal of NO and SO2 from flue gas by combined heat and Fe2+ activated aqueous persulfate solutions

The use of advanced oxidation processes (AOPs) to integrate flue gas treatments for SO₂, NO_x and Hg⁰ into a single process unit is rapidly gaining research attention. AOPs are processes that rely on the generation of mainly the hydroxyl radical. This work evaluates the effectiveness of the simultaneous removal of NO and SO₂ from flue gas utilizing AOP induced by the combined heat and Fe²⁺ activation of aqueous persulfate, and elucidates the reaction pathways. The results indicated that both SO₂ in the flue gas and Fe²⁺ in solution improved NO removal, while the SO₂ is almost completely removed. Increased temperature led to increase in NO removal in the absence and presence of both Fe²⁺ and SO₂, and in the absence of either SO₂ or Fe²⁺, but the enhanced NO removal due to the presence of SO₂ alone dominated at all temperatures. The removal of NO increased from 77.5% at 30 °C to 80.5% and 82.3% at 50 °C and 70 °C in the presence of SO₂ alone, and from 35.3% to 62.7% and 81.2%, respectively, in the presence of Fe²⁺ alone. However, in the presence of both SO₂ and Fe²⁺, NO conversion is 46.2% at 30 °C, increased only slightly to 48.2% at 50 °C; but sharply increased to 78.7% at 70 °C compared to 63.9% for persulfate-only activation. Results suggest NO removal in the presence of SO₂ is equally effective by heat-only or heat-Fe²⁺ activation as the temperature increases. The results should be useful for future developments of advanced oxidation processes for flue gas treatments.