Toward the Improvement of Silicon-Based Composite Electrodes via an In-Situ Si@C-Graphene Composite Synthesis for Li-Ion Battery Applications

Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g^-1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways.

A porous silicon anode prepared by dealloying a Sr-modified Al–Si eutectic alloy for lithium ion batteries

Silicon has been considered to be one of the most promising anode materials for next generation lithium ion batteries due to its high theoretical specific capacity. However, its huge volume expansion during the lithiation/delithiation process that can result in rapid capacity fading and low conductivity present significant challenges for application. In this study, the morphology of Si in an Al–Si eutectic alloy was modified by Sr, and porous Si was then produced by dealloying the precursor. Profiting from the unique structure, the Si anode exhibits an excellent reversible capacity of 405 mA h g⁻¹ at 0.5 A g⁻¹ after 100 cycles and a fantastic first cycle coulombic efficiency of 83.74%. Furthermore, the porous silicon modified by Sr delivers a stable capacity of 594.8 mA h g⁻¹ even at a high current density of 2 A g⁻¹ after 50 cycles, suggesting a good rate capability.

With a porous coralloid structure, the silicon anode prepared by dealloying the Sr-modified Al–Si eutectic alloy exhibits excellent cycle and rate performances.

Dual Buffering Inverse Design of Three-Dimensional Graphene-Supported Sn-TiO2 Anodes for Durable Lithium-Ion Batteries

Stable battery operation involving high-capacity electrode materials such as tin (Sn) has been plagued by dimensional instability-driven battery degradation despite the potentially accessible high energy density of batteries. Rational design of Sn-based electrodes inevitably requires buffering or passivation layers mostly in a multi-stacked manner with sufficient void inside the shells. However, undesirable void engineering incurs energy loss and shell fracture during the strong calendaring process. Here, this study reports an inverse design of freestanding 3D graphene electrodes sequentially passivated by capacity-contributing Sn and protective/buffering TiO₂ . Monodisperse polymer bead templates coated with inner TiO₂ and outer SnO₂ layers generate regular macropores and 3D interconnected graphene framework while the inner TiO₂ shell turns inside out to fully passivate the surface of Sn nanoparticles during the thermal annealing process. The prepared 3D freestanding electrodes are simultaneously buffered by electronically conductive and flexible graphene support and ion-permeable/mechanically stable TiO₂ nanoshells, thus greatly extending the cycle life of batteries more than 5000 cycles at 5 C with a reversible capacity of ≈520 mAh g^-1 with a high volumetric energy density.

Long-Term Stable Hollowed Silicon for Li-Ion Batteries Based on an Improved Low-Temperature Molten Salt Strategy

Nanostructured hollow silicon has attracted tremendous attention as high-performance anode materials in Li-ion battery applications. However, the large-scale production of pure hollowed silicon with long cycling stability is still a great challenge. Here, we report an improved low-temperature molten salt strategy to synthesize nanosized hollowed silicon with a stable structure on a large scale. As an anode material for rechargeable lithium-ion batteries, it exhibits a high capacity, excellent long cycling, and steady rate performance at different current densities. Especially, a high reversible capacity of 2028.6 mA h g^-1 at 0.5 A g^-1 after 150 cycles, 994.3 mA h g^-1 at 3 A g^-1 after 500 cycles, and 538.8 mAh g^-1 at 5 A g^-1 after 1200 cycles could be obtained. This kind of nanosized hollowed silicon can be applied as a basic anode material in silicon-based composites for long-term stable Li-ion battery applications.

Enhanced Stability Lithium-Ion Battery Based on Optimized Graphene/Si Nanocomposites by Templated Assembly

Considering the sharp increase in energy demand, Si-based composites have shown promise as high-performance anodes for lithium-ion batteries during the last few years. However, a significant volume change of Si during repetitive cycles may cause technical and security problems that limit the particular application. Here, an optimized reduced graphene oxide/silicon (RGO/Si) composite with excellent stability has been fabricated via a facile templated self-assembly strategy. The active silicon nanoparticles were uniformly supported by graphene that can further form a three-dimensional network to buffer the volume change of Si and produce a stable solid-electrolyte interphase film due to the increased specific surface area and enhanced intermolecular interaction, resulting in an increase of electrical conductivity and structural stability. As the anode electrode material of lithium-ion batteries, the optimized 10RGO/Si-600 composite showed a reversible high capacity of 2317 mA h/g with an initial efficiency of 93.2% and a quite high capacity retention of 85% after 100 cycles at 0.1 A/g rate. Especially, it still displayed a specific capacity of 728 mA h/g after 100 cycles at a reasonably high current density of 2 A/g. This study has proposed the optimized method for developing advanced graphene/Si nanocomposites for enhanced cycling stability lithium-ion batteries.

Electrode Design from "Internal" to "External" for High Stability Silicon Anodes in Lithium-Ion Batteries

Building a stable electrode structure is an effective way to promote the practical applications of Si anode, which has large volume changes during charge/discharge process, in lithium-ion batteries. Herein, we fabricated an integrated electrode structure reinforced from "internal" to "external" to boost the performance of Si nanoparticles (NPs). The electrode contains the conductive polymer of poly(3,4-ethylene dioxythiophene):poly(styrenesulphonic acid) (PEDOT:PSS) as the binder, reduced graphene oxide (rGO), and hydroxylated Si NPs, which help form the "internal" interaction between them through the hydrogen bonding, while the "external" malleable network built by the flexible polymers and two-dimensional rGO sheets as the framework endows the highly flexible network to accommodate the Si expansion and forms long-range conductive network. Thus, the built-integrated electrode by the simple casting method shows high capacity, good rate performance, and long cycling stability. It is noted that such an electrode shows a high areal capacity of 3.29 mA h cm^-2 and a high volumetric capacity of 3290 A h cm^-3 at 0.09 mA cm^-2. The integrated electrode design is promising to promote the practical use of Si anodes and can be extended to other noncarbon anodes with large volume changes.