HER2 aptamer-conjugated iron oxide nanoparticles with PDMAEMA-b-PMPC coating for breast cancer cell identification

Aim: To synthesize HER2 aptamer-conjugated iron oxide nanoparticles with a coating of poly(2-(dimethylamino) ethyl methacrylate)-poly(2-methacryloyloxyethylphosphorylcholine) block copolymer (IONPPPs). Methods: Characterization covered molecular structure, chemical composition, thermal stability, magnetic characteristics, aptamer interaction, crystalline nature and microscopic features. Subsequent investigations focused on IONPPPs for in vitro cancer cell identification. Results: Results demonstrated high biocompatibility of the diblock copolymer with no significant toxicity up to 150 μg/ml. The facile coating process yielded the IONPP complex, featuring a 13.27 nm metal core and a 3.10 nm polymer coating. Functionalized with a HER2-targeting DNA aptamer, IONPPP enhanced recognition in HER2-amplified SKBR3 cells via magnetization separation. Conclusion: These findings underscore IONPPP's potential in cancer research and clinical applications, showcasing diagnostic efficacy and HER2 protein targeting in a proof-of-concept approach.

Double thermoresponsive graft copolymers with different chain ends: feasible precursors for covalently crosslinked hydrogels

The tailored synthesis of graft copolymers from acrylic and methacrylic monomers can be accomplished solely through photoiniferter reversible addition-fragmentation chain transfer (RAFT) polymerization. Samples with poly[oligo(ethylene glycol) methacrylate] (POEGMA) backbones synthesized under green light irradiation and poly(N-isopropylacrylamide) (PNIPAM) side chains growing under blue light irradiation are presented. As monitored by temperature-dependent dynamic light scattering (DLS) measurements and temperature-variable nuclear magnetic resonance (NMR) spectroscopy, the architecture of the graft copolymers allows unique two-step lower critical solution temperature (LCST) transitions in aqueous solutions. Meanwhile, different end-groups introduced by the corresponding RAFT agents affect the detailed thermoresponsive behavior remarkably. This RAFT strategy shows more advantages when the multiple trithiocarbonate groups are converted into thiol reactive pyridyl disulfide (PDS) groups via a facile post-polymerization modification. The PDS-terminated graft copolymer can then be regarded as a usable precursor for various applications, such as thermoresponsive hydrogels.

Amino acid-derived ABCBA-type antifouling biohybrid with multi-stimuli responsivity and contaminant removal capability

A multi-stimuli (pH/thermo/redox)-responsive amphiphilic poly(cysteine methacrylamide)-block-poly(N,N-dimethylaminoethyl methacrylate)-block-polybutadiene-block-poly(N,N-dimethylaminoethyl methacrylate)-block-poly(cysteine methacrylamide) (PCysMAM-b-PDMAEMA-b-PB-b-PDMAEMA-b-PCysMAM) pentablock copolymer biohybrids, based on hydrophobic PB, ampholytic redox responsive PCysMAM and dual (pH and temperature) stimuli responsive PDMAEMA segments,...

In Vivo Biocompatible Self-Assembled Nanogel Based on Hyaluronic Acid for Aqueous Solubility and Stability Enhancement of Asiatic Acid

Asiatic acid (AA), a natural triterpene found in Centalla asiatica, possesses polypharmacological properties that can contribute to the treatment and prophylaxis of various diseases. However, its hydrophobic nature and rapid metabolic rate lead to poor bioavailability. The aim of this research was to develop a thermoresponsive nanogel from hyaluronic acid (HA) for solubility and stability enhancement of AA. Poly(N-isopropylacrylamide) (pNIPAM) was conjugated onto HA using a carbodiimide reaction followed by ¹H NMR characterization. pNIPAM-grafted HA (HA-pNIPAM) nanogels were prepared with three concentrations of polymer, 0.1, 0.15 and 0.25% w/v, in water by the sonication method. AA was loaded into the nanogel by the incubation method. Size, morphology, AA loading capacity and encapsulation efficiency (EE) were analyzed. In vitro cytocompatibility was evaluated in fibroblast L-929 cells using the PrestoBlue assay. Single-dose toxicity was studied using rats. HA-pNIPAM nanogels at a 4.88% grafting degree showed reversible thermo-responsive behavior. All nanogel formulations could significantly increase AA water solubility and the stability was higher in nanogels prepared with high polymer concentrations over 180 days. The cell culture study showed that 12.5 µM AA in nanogel formulations was considered non-toxic to the L-929 cells; however, a dose-dependent cytotoxic effect was observed at higher AA-loaded concentrations. In vivo study proved the non-toxic effect of AA loaded in HA-pNIPAM nanogels compared with the control. Taken together, HA-pNIPAM nanogel is a promising biocompatible delivery system both in vitro and in vivo for hydrophobic AA molecules.

Photoluminescent Nanoinks with Multilevel Security for Quick Authentication of Encoded Optical Tags by Sunlight: Effective Physicochemical Parameters on Responsivity, Printability, and Brightness

Investigation of developed photoactive security inks and anticounterfeiting technologies in recent years indicates significant challenges for future of this research area, such as increase of security, fast responsivity, and facile authentication. Here, amine-functionalized latex nanoparticles were synthesized by emulsion copolymerization of methyl methacrylate (MMA) and 2-(dimethylamino)ethyl methacrylate (DMAEMA). Size of the latex nanoparticles was increased as a function of poly(dimethylaminoethyl acrylate) (PDMAEMA) contents, and also a decrease of particle size was obtained in response to an increase of temperature from 25 to 70 °C, above the lower critical solution temperature (LCST) of PDMAEMA. Surface physical modification of the functional latex nanoparticle with spiropyran photoswitches led to the development of anticounterfeiting nanoinks that have multilevel security and photochromic/fluorescence properties with a higher intensity and also brightness. The photoluminescent nanoinks were made of spiropyran latex nanoparticles and used for printing of the encoded optical security tags on cellulosic papers and banknotes. The results displayed that an increase of the particle size above 100 nm and an increase of the PDMAEMA contents led to a remarkable decrease of printability, fluorescent emission, brightness, intensity of photochromism, and also resolution of the printed security tags. As a significant advantage of the developed security inks, the printed security tags could be authenticated easily and fast upon sunlight irradiation by means of photochromism. The responsivity of encoded tags from the invisible to visible state is immediate upon sunlight irradiation for some seconds, whose intensity of coloration is appropriate and detectable clearly by naked eyes. The security anticounterfeiting inks based on spiropyran with multilevel security have been reported for the first time for applying in printing of encoded security tags on cellulosic papers, banknotes, and other documents, where the printed marks are detectable on sunlight exposure.

Magnetic dual-responsive semi-IPN nanogels based on chitosan/PNVCL and study on BSA release behavior

Magnetic thermoresponsive nanogels present a promising new approach for targeted drug delivery. In the present study, bovine serum albumin (BSA) loaded thermo-responsive magnetic semi-IPN nanogels (MTRSI-NGs) were developed. At first poly(N-vinyl caprolactam) (PNVCL) was synthesized by free radical polymerization and then MTRSI-NGs were prepared by crosslinking chitosan in presence of chitosan and Fe₃O₄. The formation of MTRSI-NGs has been confirmed by FTIR, and the average molecular weight of PNVCL was determined by GPC analysis. Rheological and turbidimetry analysis were used to determine lower critical solution temperature (LCST) of PNVCL and magnetic thermo-responsive nanogels (MTRSI-NGs) around 32 and 37 °C, respectively. FE-SEM analysis showed particle size at less than 20 nm in the dried state. Dynamic light scattering determined particle size at about 30 nm in a swelling state. The analysis of release behavior showed that the BSA release ratio at 40 °C was faster than 25 °C. The pH release behavior was evaluated at pH 5.5 and 7.4 and showed that the drug release rate at pH 5.5 was more rapid than pH 7.4. The results show MTRSI-NGs are applicable to protein targeted delivery by thermosensitive targeted drug delivery systems.

Combination therapy of biogenic C-dots and lysozyme for enhanced antibacterial and antibiofilm activity

Nearly 80% of human chronic infections are caused due to bacterial biofilm formation. The increased resistance against the conventional antimicrobial agents makes it difficult to treat the biofilm-related infections. The antibiotics resistance developed by planktonic cells has also become a major threat for human. Therefore, we have attempted here to develop an effective alternative strategy to overcome the issues of antibiotics resistance of bacteria. Upon synthesis, biogenic C-dots were combined with lysozymes which were further encapsulated into chitosan nanocarrier to form C-dots carrier (CDC). The as-synthesized C-dots were found irregular shaped and the average size of C-dots and CDC were 8 ± 2 nm and 450 ± 50 nm, respectively. To ensure secure and targeted delivery of C-dots and lysozyme we have employed chitosan, a biodegradable and natural biopolymer, as a delivery system. The study of time-dependent bacterial growth and flow cytometry analysis demonstrated that CDC can exhibit a synergistic bactericidal activity against the antibiotics resistant recombinant E. coli cells. Further, we have shown that the CDC could be a potent agent for both prevention of biofilm formation and eradication of preformed biofilm. In addition, we have observed that our drug delivery system is hemocompatible in nature making it suitable for in vivo applications. Therefore, we believe that the combination therapy of C-dots and lysozyme may be used as an excellent antibacterial and antibiofilm strategy.

Antibacterial Amphiphilic Copolymers of Dimethylamino Ethyl Methacrylate and Methyl Methacrylate to Control Biofilm Adhesion for Antifouling Applications

Amphiphilic copolymers are recognized as important biomaterials and used as antibacterial agents due to their effective inhibition of bacterial growth. In current study, the amphiphilic copolymers of P(DMAEMA-co-MMA) were synthesized using free radical polymerization by varying the concentrations of hydrophilic monomer 2-dimethylamino ethylmethacrylate (DMAEMA) and hydrophobic monomer methyl methacrylate (MMA) having PDI value of 1.65-1.93. The DMAEMA monomer, through ternary amine with antibacterial property optimized copolymers, P(DMAEMA-co-MMA), compositions to control biofilm adhesion. Antibacterial activity of synthesized copolymers was elucidated against Gram-positive Staphylococcus aureus (ATCC 6538) and Gram-negative Escherchia coli (ATCC 8739) by disk diffusion method, and zones of inhibition were measured. The desired composition that was PDM1 copolymer had shown good zones of inhibition i.e., 19 ± 0.33 mm and 20 ± 0.33 mm for E. coli and S. aureus respectively. The PDM1 and PDM2 have exhibited significant control over bacterial biofilm adhesion as tested by six well plate method. SEM study of bacterial biofilm formation has illustrated that these copolymers act in a similar fashion like cationic biocide. These compositions viz. PDM1 and PDM2, may be useful in development of bioreactors, sensors, surgical equipment and drug delivery devices.

An improved method in fabrication of smart dual-responsive nanogels for controlled release of doxorubicin and curcumin in HT-29 colon cancer cells

The combination therapy which has been proposed as the strategy for the cancer treatment could achieve a synergistic effect for cancer therapies and reduce the dosage of the applied drugs. On account of the the unique properties as the high absorbed water content, biocompatibility, and flexibility, the targeting nanogels have been considred as a suitable platform. Herein, a non-toxic pH/thermo-responsive hydrogel P(NIPAAm-co-DMAEMA) was synthesized and characterized through the free-radical polymerization and expanded upon an easy process for the preparation of the smart responsive nanogels; that is, the nanogels were used for the efficient and controlled delivery of the anti-cancer drug doxorubicin (DOX) and chemosensitizer curcumin (CUR) simultaneously like a promising strategy for the cancer treatment. The size of the nanogels, which were made, was about 70 nm which is relatively optimal for the enhanced permeability and retention (EPR) effects. The DOX and CUR co-loaded nanocarriers were prepared by the high encapsulation efficiency (EE). It is important to mention that the controlled drug release behavior of the nanocarriers was also investigated. An enhanced ability of DOX and CUR-loaded nanoformulation to induce the cell apoptosis in the HT-29 colon cancer cells which represented the greater antitumor efficacy than the single-drug formulations or free drugs was resulted through the In vitro cytotoxicity. Overall, according to the data, the simultaneous delivery of the dual drugs through the fabricated nanogels could synergistically potentiate the antitumor effects on the colon cancer (CC).

Facile access to functional polyacrylates with dual stimuli response and tunable surface hydrophobicity

Well-defined functional polyacrylates with dual stimuli response and tunable surface hydrophobicity were synthesized via the recyclable Ni–Co alloy catalyzed reversible deactivation radical polymerization technique at ambient temperature.

Nanocomposite of Ag nanoparticles and catalytic fluorescent carbon dots for synergistic bactericidal activity through enhanced reactive oxygen species generation

Microwave mediated synthesis of catalytic fluorescent carbon dots (Cdots) has been reported using biodegradable starch as precursor. The as-synthesized Cdots were then characterized using various techniques such as fluorescence spectroscopy, fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM) and x-ray photoelectron spectroscopy (XPS) analysis. Interestingly, Cdots showed high catalytic activity in the photo-reduction of Ag⁺ to silver nanoparticles (Ag NPs). During the photo-reduction process, no additional surface passivating agents was needed to stabilize the Ag NPs. Further, TEM results indicated the formation of Cdot-Ag NP nanocomposite i.e. Ag NPs surrounded with Cdots, and the emission intensity of Cdots was significantly decreased whereas the lifetime of Cdots remained almost unaltered in the presence of Ag NPs following static quenching. Finally, combination therapy of Cdots and Ag NPs using Cdot-Ag NP nanocomposite was performed which indicated synergistic bactericidal activity against antibiotic resistant recombinant E. coli bacteria. The treatment elevated the reactive oxygen species (ROS) level as compared to its individual components. Additionally, the flow cytometer study demonstrated that combination therapy causing bacterial cell wall perforation that was possibly leading to synergistic bactericidal activity against both Gram positive and Gram negative bacteria. The presence of Cdots on the surface of the Ag NPs due to their ground state complexation, possibly facilitated electrons towards Ag NPs which enhanced the ROS production in comparison to only Ag NPs.

Effects of Chemical Modifications on the Thermoresponsive Behavior of a PDMAEA-b-PNIPAM-b-POEGA Triblock Terpolymer

In this work, the synthesis, selective chemical modifications, and self-assembly behavior in aqueous media of a novel poly(2-(dimethylamino)ethyl acrylate)₂₀-b-poly(N-isopropylacrylamide)₁₁-b-poly(oligo ethylene glycol methyl ether acrylate)₁₈ (PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈) dual-responsive (pH and temperature) and triply hydrophilic amino-based triblock terpolymer are reported. The amine functional triblock terpolymer was synthesized by sequential reversible addition fragmentation chain transfer polymerization (RAFT) polymerization and molecularly characterized by size exclusion chromatography (SEC) and ¹H-NMR spectroscopy that evidenced the success of the three-step polymerization scheme. The tertiary amine pendant groups of the PDMAEA block were chemically modified in order to produce the Q₁PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ as well as the Q₆PDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ quaternized triblock terpolymers (Q₁ and Q₆ prefixes show the number of carbon atoms (C1 and C6) attached on the PDMAEA groups) using methyl iodide (CH₃I) and 1-iodohexane (C₆H₁₃I) as the quaternizing agents and the SPDMAEA₂₀-b-PNIPAM₁₁-b-POEGA₁₈ sulfobetainized triblock terpolymer using 1,3 propanesultone (C₃H₆O₃S) as the sulfobetainization agent. The self-assembly properties of the triblock terpolymers in aqueous solutions upon varying temperature and solution pH were studied by light scattering and fluorescence spectroscopy experiments. The novel triblock terpolymers self-assemble into nanosized aggregates upon solution temperature rise above the nominal lower critical solution temperature (LCST) of the temperature-responsive PNIPAM block. The remarkable stimuli-responsive self-assembly behavior of the novel triblock terpolymers in aqueous media make them interesting candidates for biomedical applications in the fields of drug and gene delivery.

Renewable Fabric Surface-Initiated ATRP Polymerizations: Towards Mixed Polymer Brushes

A totally new approach in the synthesis of mixed polymer brushes tethered on polyamide (PA) surfaces is presented herein. As a proof of concept, two types of homopolymers were synthesized in sequential surface-initiated atom transfer radical polymerization (SI-ATRP) reactions: poly(methyl methacrylate)/poly((2-dimethylamino)ethyl methacrylate) and polystyrene /poly((2-dimethylamino)ethyl methacrylate). The ATRP initiator was immobilized on the surface through PA chain-end groups in two subsequent steps, separated by homo-polymerizations. The amount of the PA chains' end groups available on the modified surface was tuned by the thermal rearrangement of the surface.

Dual CO2/temperature-responsive diblock copolymers confer controlled reversible emulsion behavior

Dual-stimuli responsive diblock copolymers possessing unique temperature-sensitive and CO₂/N₂-switching ability were successfully developed to promote efficient manipulation of reversible emulsification processes.

Active control of properties of concrete: a (p)review

Concrete properties to a large extent depend on mix design and processing, currently leaving only limited options to actively modify concrete properties during or after casting. This paper gives a (p)review on a more advanced active control of properties of concrete, based on the application of external signals to trigger an intended response in the material, either in fresh or hardened state. Current practices in concrete industry that could be considered as active control are briefly summarized. More advanced active control mechanisms as studied in other fields, e.g. based on hydrogels and other functional polymers, are reviewed and some principles are listed. A specific focus is further given on potential methods for active rheology control. Based on the concepts developed in other fields, substantial progress could be made in order to achieve active control of fresh and hardened concrete properties. However, several challenges remain, like the stability and functioning of the responsive material in a cementitious environment, the applicability of the control signal in a cementitious material, and the economy, logistics and safety of a control system on a construction site or in precast industry. Finding solutions to these challenges will lead to marvelous opportunities in general, and for 3D and even 4D printing more particularly.

Heterofunctional Poly(ethylene glycol) (PEG) Macroinitiator Enabling Controlled Synthesis of ABC Triblock Copolymers

ABC triblock copolymers with a poly(ethylene glycol) (PEG) midblock have attractive properties for biomedical applications because of PEG's favorable properties regarding biocompatibility and hydrophilicity. However, easy strategies to synthesize polymers containing a PEG midblock are limited. In this study, the successful synthesis of a heterofunctional PEG macroinitiator containing both an azoinitiator and an atom transfer radical polymerization (ATRP) initiator is demonstrated. This novel PEG macroinitiator allows the development of elegant synthesis routes for PEG midblock-containing ABC copolymers that does not require protection of initiating sites or polymer end-group postmodification. Polymers with outer blocks composed of different monomers were synthesized to illustrate the versatility of this macroinitiator. N-Isopropylacrylamide (NIPAM) was included to obtain thermosensitive polymers, 2-(dimethylamino)ethyl methacrylate (DMAEMA) provided pH-sensitive properties, and 2-hydroxyethyl acrylate (HEA) functioned as a noncharged hydrophilic block that also allows for postmodifications reactions. This synthesis approach can further contribute to the design of high-precision polymers with tailorable block compositions and polymer topologies, which is highly attractive for applications in nanotechnology.

A facile route to segmented copolymers by fusing ambient temperature step-growth and RAFT polymerization

We introduce the facile synthesis of segmented copolymers by a catalyst-free Diels-Alder (DA) reaction at ambient temperature via step-growth and subsequent reversible addition fragmentation chain transfer (RAFT) polymerization. High molecular weight step-growth polymers are readily obtained (M_w = 40 000 g mol^-1), featuring trithiocarbonate moieties in their chain, which allow monomer insertion via RAFT polymerization yielding high molecular weight species.