Reaction Mechanism and Performance of Innovative 2D Germanane-Silicane Alloys: SixGe1- xH Electrodes in Lithium-Ion Batteries

The adjustable structures and remarkable physicochemical properties of 2D monoelemental materials, such as silicene and germanene, have attracted significant attention in recent years. They can be transformed into silicane (SiH) and germanane (GeH) through covalent functionalization via hydrogen atom termination. However, synthesizing these materials with a scalable and low-cost fabrication process to achieve high-quality 2D SiH and GeH poses challenges. Herein, groundbreaking 2D SiH and GeH materials with varying compositions, specifically Si0.25Ge0.75H, Si0.50Ge0.50H, and Si0.75Ge0.25H, are prepared through a simple and efficient chemical exfoliation of their Zintl phases. These 2D materials offer significant advantages, including their large surface area, high mechanical flexibility, rapid electron mobility, and defect-rich loose-layered structures. Among these compositions, the Si0.50Ge0.50H electrode demonstrates the highest discharge capacity, reaching up to 1059 mAh g-1 after 60 cycles at a current density of 75 mA g-1. A comprehensive ex-situ electrochemical analysis is conducted to investigate the reaction mechanisms of lithiation/delithiation in Si0.50Ge0.50H. Subsequently, an initial assessment of the c-Li15(SixGe1- x)4 phase after lithiation and the a-Si0.50Ge0.50 phase after delithiation is presented. Hence, this study contributes crucial insights into the (de)lithiation reaction mechanisms within germanane-silicane alloys. Such understanding is pivotal for mastering promising materials that amalgamate the finest properties of silicon and germanium.

High-performance SiGe anode materials obtained by dealloying a Sr-modified Al-Si-Ge eutectic precursor

In exploring the anode materials for high efficiency Li-ion batteries, it has been found that the electrochemical performance of Si can be enhanced via alloying with Ge. In the present work, we modified the Al-Si-Ge eutectic ribbons as the precursor by adding a trace of Sr to the alloy. The SiGe particles obtained by dealloying the Al-Si-Ge eutectic precursor have a porous coral-like nano-architecture with numerous fibrous branches towards various directions. Because of the large surface area and porosity, the as-prepared Sr-modified SiGe anode delivers an excellent capacity of 1166.6 mA h g^-1 at 0.1 A g^-1 after 100 cycles with a fantastic initial coulombic efficiency of 83.62%. Besides, it has a superior rate performance with a reversible capacity of 675.3 mA h g^-1 at the current density of 8 A g^-1. It is demonstrated that the modification treatment that is widely used in metallurgy is also a promising strategy to synthesize high-performance battery electrodes and other energy storage materials.

Facile synthesis of Si/Ge/graphite@C composite with improved tap density and electrochemical performance

Nanoengineering is one of the most effective methods to promote the lithium storage performance of silicon material, which suffers from huge volume changes and poor reaction kinetics during cycling. However, the commercial application of nanostructured silicon is hindered by its high manufacturing cost and low tap density. Herein, a Si/Ge/graphite@C composite was successfully synthesized by ball-milling with subsequent calcination. By introducing Ge, graphite and an amorphous carbon coating, both tap density and electrochemical performance are improved significantly. Benefiting from the synergetic effects of the above components, the Si/Ge/graphite@C composite delivers a reversibility capacity of 474 mA h g-1 at 0.2 A g-1 and stable capacity retention.

Rapid, Energy-Efficient and Pseudomorphic Microwave-Induced-Metal-Plasma (MIMP) Synthesis of Mg2Si and Mg2Ge

Polycrystalline magnesium silicide, Mg2Si and magnesium germanide, Mg2Ge were synthesised from the elemental powders via the microwave-induced-metal-plasma (MIMP) approach at 200 W within 1 min in vacuo for the first...