Effect of Liquid Load Level and Binder Type on the Tabletability of Mesoporous Silica Based Liquisolids

Mesoporous silica offers an easy way to transform liquids into solids, due to their high loading capacity for liquid or dissolved active ingredients and the resulting enhanced dissolution properties. However, the compression of both unloaded and loaded mesoporous silica bulk material into tablets is challenging, due to poor/non-existing binding capacity. This becomes critical when high drug loads are to be achieved and the fraction of additional excipients in the final tablet formulation needs to be kept at a minimum. Our study aimed to investigate the mechanism of compression and tabletability dependent on the Liquid Load Level of the silica and type of filler/binder in binary tabletting mixtures. To this end, Vivapur® 101, FlowLac® 90, Pearlitol® 200 SD and tricalcium citrate tetrahydrate were selected and mixed with Syloid® XDP 3050 at various Liquid Load Levels. Compaction characteristics were analysed using the StylOne® Classic 105 ML compaction simulator. Additionally, the Overall Liquid Load (OLL) was defined as a new critical quality attribute for liquisolid tablets. The Overall Liquid Load allows straightforward, formulation-relevant comparisons between various fillers/binders, liquid components, and silica types. Results indicate strong binding capacity and high plasticity of the fillers/binders as key components for successful high liquid load silica tablet formulation. A volumetric combination of 30% Vivapur® 101 and 70% 0.75 mL/g loaded Syloid® XDP 3050 proved to be the most effective mixture, achieving an Overall Liquid Load of 36-41% [v/v] and maintaining a tensile strength of 1.5 N/mm2 with various liquid vehicles.

Thermobaric history as a tool to govern properties of glasses: case of dipropylene glycol

The elastic properties of high- and low-pressure glasses of dipropylene glycol were determined for the first time under conditions of isothermal compression up to 1 GPa at 77 K and isobaric heating of 77-300 K at 0.05 GPa and 1 GPa. A strong dependence of the elastic properties of glasses on their thermobaric history has been revealed: glasses obtained at high pressure have not only higher densities (3.9%), but also noticeably higher elastic moduli. This effect is especially pronounced in the shear modulus: high-pressure glass has a 30% higher shear modulus than low-pressure glass. The behavior of elastic moduli during the glass-to-liquid transition also depends on the thermobaric history. Glass produced at low pressure but heated at high pressure has anomalous temperature dependences of the elastic moduli. Heating dipropylene glycol glasses at different pressures allowed us to refine the Tg(P) dependence.

Ultrasonic study of 1-X adamantane (X = F, Cl, Br) compounds at high pressure and at order-disorder transitions

We present an ultrasonic study of the elastic properties of 1-X adamantane (X = F, Cl, Br) during order-disorder and order-quasi-order transitions at various temperatures (77-305 K) and high pressures (up to 1 GPa). On the basis of our ultrasonic experiments, we studied for the first time the high-temperature (HT) Fm3m, medium-temperature (MT) P4₂/nmc, and low-temperature (LT) P42₁c phases of 1-fluoroadamantane at high pressures. The elastic properties of these phases at pressures up to 1 GPa at T = 293 and 77 K, as well as at isobaric heating from 77 to 293 K, have been determined. The boundaries of the HT → MT → LT phase transitions have been evaluated, which makes it possible to extend the phase diagram of 1-fluoroadamantane to higher pressures. We have confirmed that the MT → LT transition is a second-order phase transition because it is not accompanied by volume jumps but is manifested in anomalies of the elastic properties and ultrasound transmission both in high-pressure experiments and under isobaric heating. The comparison of the elastic properties of 1-X adamantanes (X = H, F, Cl, Br) has indicated a monotonic dependence at low pressures: the bulk modulus is the highest for adamantane and decreases with an increase of the atomic number of the halogen substitute (from fluorine to bromine).

Unravelling the Mechanism of Viscoelasticity in Polymers with Phase-Separated Dynamic Bonds

Incorporation of dynamic (reversible) bonds within polymer structure enables properties such as self-healing, shape transformation, and recyclability. These dynamic bonds, sometimes refer as stickers, can form clusters by phase-segregation from the polymer matrix. These systems can exhibit interesting viscoelastic properties with an unusually high and extremely long rubbery plateau. Understanding how viscoelastic properties of these materials are controlled by the hierarchical structure is crucial for engineering of recyclable materials for various future applications. Here we studied such systems made from short telechelic polydimethylsiloxane chains by employing a broad range of experimental techniques. We demonstrate that formation of a percolated network of interfacial layers surrounding clusters enhances mechanical modulus in these phase-separated systems, whereas single chain hopping between the clusters results in macroscopic flow. On the basis of the results, we formulated a general scenario describing viscoelastic properties of phase-separated dynamic polymers, which will foster development of recyclable materials with tunable rheological properties.

Average density of states of amorphous Hamiltonians: role of phonon mediated coupling of nano-clusters

Based on a description of an amorphous solid as a collection of coupled nanosize molecular clusters referred as basic blocks, we analyse the statistical properties of its Hamiltonian. The information is then used to derive the ensemble averaged density of the vibrational states (non-phonon) which turns out to be a Gaussian in the bulk of the spectrum and an Airy function in the low frequency regime. A comparison with experimental data for six glasses confirms validity of our theoretical predictions.

Phase transitions in 1-bromoadamantane compared to 1-chloroadamantane: similarities and unique features

The elastic properties of 1-chloroadamantane and 1-Bromoadamantane in order-disorder and order-quasi-order phase transitions at temperatures in the range of 77-305 K and high pressures up to 1.1 GPa are studied by the ultrasonic method. The elastic moduli of halogenated adamantanes clearly indicate these transitions, demonstrating high capabilities of the ultrasonic method. Our ultrasonic studies have detected for the first time the λ-anomaly of the elastic properties and, thereby, have confirmed that the phase transition from the orientationally ordered to quasi-ordered phase (M → O) in 1-bromoadamantane is a weak first-order phase transition having some properties of a second-order phase transition. The pressure derivatives of the elastic moduli of 1-chloroadamantane and 1-bromoadamantane in the orientationally ordered phase at 77 K are dB/dP ≈ 8, which allows using the Lennard-Jones potential to theoretically describe this phase.

A mechanical, electrical dual autonomous self-healing multifunctional composite hydrogel

The versatile properties make hydrogels a potential multipurpose material that finds wide applications. However, the preparation of multipurpose hydrogels is very challenging. Here, we report a method based on free radical reaction and composite mechanisms to prepare mechanical and electrical self-healing multifunctional hydrogels. In this study, the introduction of imidazolium salt ionic liquids and glycerol in the hydrogel system endows the gels with good antibacterial, conductive, and adhesive properties and excellent antifreeze properties. The testing results show that the as-prepared hydrogel has stable mechanical and electrical properties even under the extremely cold condition of -50°C after self-healing. Moreover, the active esters formed in the dynamic radical reaction have better reducibility, thus further investing the as-prepared hydrogel with high antioxidant activity. The application results show that these comprehensive properties make such hydrogel system very useful in wound repair and wearable strain sensors.

Turning Rubber into a Glass: Mechanical Reinforcement by Microphase Separation

Supramolecular associations provide a promising route to functional materials with properties such as self-healing, easy recyclability or extraordinary mechanical strength and toughness. The latter benefit especially from the transient character of the formed network, which enables dissipation of energy as well as regeneration of the internal structures. However, recent investigations revealed intrinsic limitations in the achievable mechanical enhancement. This manuscript presents studies of a set of telechelic polymers with hydrogen-bonding chain ends exhibiting an extraordinarily high, almost glass-like, rubbery plateau. This is ascribed to the segregation of the associative ends into clusters and formation of an interfacial layer surrounding these clusters. An approach adopted from the field of polymer nanocomposites provides a quantitative description of the data and reveals the strongly altered mechanical properties of the polymer in the interfacial layer. These results demonstrate how employing phase separating dynamic bonds can lead to the creation of high-performance materials.

Elastic properties of liquid and glassy propane-based alcohols under high pressure: the increasing role of hydrogen bonds in a homologous family

We have measured the elastic moduli of liquid and glassy n-propanol and propylene glycol (PG) under pressure by ultrasonic techniques and have recalculated similar characteristics for glycerol from the previous experiment. All three substances form a ternary homologous family with the common formula C3H8-n(OH)n (n = 1, 2, 3), where the number of hydrogen bonds per molecule increases with the number of oxygen atoms approximately as ≈2n. In turn, the enhancement of hydrogen bonding results in an increase in elastic moduli (bulk modulus for liquids or bulk and shear moduli for glasses) from n-propanol to glycerol at all pressures, while the volume per molecule Vm shows the opposite trend at atmospheric pressure in spite of an increase in the molecular size. Nevertheless, the ratios between the Vm values at pressure P > 0.05 GPa are inverted in liquids and tend to the ratios of molecule volumes which indicates a decrease of the relative contribution of hydrogen bonds to the repulsive intermolecular forces with increasing pressure regardless of increase or decrease in the number of hydrogen bonds and their strength. A similar volume behavior is observed for glasses at T = 77 K. We have also established that the relative difference between corresponding moduli of liquid or glassy n-propanol and PG is remarkably less than that between corresponding values for PG and glycerol. We explain this property by the formation of a three-dimensional network of hydrogen bonds in glycerol, where the number of hydrogen bonds per molecule is close to six.