Construct α-FeOOH-Reduced Graphene Oxide Aerogel as a Carrier for Glucose Oxidase Electrode

A promising α-FeOOH-reduced graphene oxide aerogel (FeOOH-GA) has been prepared for the assembly of an enzyme electrode. The α-FeOOH-reduced graphene oxide aerogel was characterized by X-ray powder diffraction, field emission scanning electron microscopy, transmission electron microscopy, Fourier transform infrared spectroscopy, Raman, energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy. The results reveal that graphene oxide is reduced by Fe²⁺ ion and α-FeOOH nanorods anchored on the reduced graphene oxide sheet through the Fe-O-C bond. Analyses using scanning electron microscopy and the Brunauer–Emmett–Teller method show that FeOOH-GA displays a various and interconnected pore structure. The FeOOH-GA was used as a support material on the glass carbon electrode (GCE) for glucose oxidase (GOD). Electrochemistry properties and bioelectrocatalytic activities of Nafion/GOD/FeOOH-GA/GCE were achieved from cyclic voltammetry and electrochemical impedance spectroscopy. The results show that Nafion/GOD/FeOOH-GA/GCE maintains outstanding catalytic activity and electrochemical properties. The FeOOH-GA could immobilize GOD through the hydrophobicity of the reduced graphene oxide and hydroxide radical of α-FeOOH. Appropriate α-FeOOH and diversified pore structure are beneficial for electron transfer, enzyme electrode storage, and interfacial electron transfer rate. All results indicated that the α-FeOOH-reduced graphene oxide aerogel as a carrier could effectively immobilize the tested enzyme.

Photocatalytic remediation of organic waste over Keggin-based polyoxometalate materials: A review

Photocatalytic remediation of industrial water pollution has courted intense attention lately due to its touted green approach. In this respect, Keggin-based polyoxometalates (POMs) as green solid acids in photocatalytic reaction possess superior qualities, viz. unique photoinduced charge-transfer properties, strong photooxidative-photoreductive ability, high chemical and thermal stability, and so forth. Unfortunately, it suffers from a large bandgap energy, low specific surface area, low recoverability, and scarce utilization in narrow absorption range. Therefore, the pollutant degradation performance is not satisfactory. Consequently, multifarious research to enhance the photocatalytic performance of Keggin-based POMs were reported, viz. via novel modifications and functionalizations through a variety of materials, inclusive of, inter alia, metal oxides, transition metals, noble metals, and others. In order to advocate this emerging technology, current review work provides a systematic overview on recent advancement, initiated from the strategized synthetic methods, followed by hierarchical enhancement and intensification process, at the same time emphasizes on the fundamental working principles of Keggin-based POM nanocomposites. By reviewing and summarizing the efforts adopted global-wide, this review is ended with providing useful outlooks for future studies. It is also anticipated to shed light on producing Keggin-based POM nanocomposites with breakthrough visible- and solar-light-driven photocatalytic performance against recalcitrant organic waste.

Transport and retention of hydrochar-diatomite nanoaggregates in water-saturated porous sand: Effect of montmorillonite and phosphate at different ionic strengths and solution pH

Hydrochar, a solid hydrate with a high energy density, is produced by hydrothermal carbonization of lignocellulosic biomass and is widely applied in agriculture as a soil amendment. The fate and transport of hydrochar when applied to soil need to be investigated. The major components of soil, clay and phosphate, likely interact with hydrochar in the subsurface. This study investigated the cotransport behavior of hydrochar and diatomite (D) through water-saturated quartz sand in the presence of montmorillonite (M) and/or phosphate in NaCl (1-50 mM) solutions at pH 6.0 and 9.0. The transmission electron microscopy (TEM) and scanning electron microscopy (SEM) images and zeta potential (ZP) results showed that hydrochar-D nanoaggregates formed preferentially due to surface charge heterogeneity. M inhibited the transport of hydrochar-D in sand columns regardless of the solution pH mainly because the organo-mineral clusters of hydrochar-D with M were prone to filling the pores of the sand medium. Moreover, fine M particles preferentially attached to sand could decrease the ZP of the sand surface and subsequently decrease the repulsive forces between hydrochar-D and sand. The copresence of M and phosphate slightly facilitated hydrochar-D transport at pH 6.0 due to phosphate adsorption, whereas a negligible effect on transport occurred at pH 9.0. Thus, phosphate played a predominant role in the transport of hydrochar when clays were also present. A two-site kinetic retention model suggested that k_1d/k₁ and k₂ are responsible for hydrochar-clay aggregate deposition in sand. Our findings relate to the potential risks posed by hydrochar in subsurface soils and aquifers where clay and phosphate ubiquitously co-occur.

Enhanced Photocatalytic and Fenton-like Performance of CuOx-Decorated ZnFe2O4

A series of CuO_x-decorated ZnFe₂O₄ samples were prepared by a hydrothermal method and investigated as a catalyst for the photocatalytic and Fenton-like degradation of Orange II. The active species and catalyst active sites in the two processes were also studied. It was found that the introduced CuO_x significantly enhanced the photocatalytic and Fenton-like performance of ZnFe₂O₄. Especially, ZnFe₂O₄-Cu3 prepared with the Cu/Zn ratio of 3:7 exhibited a very high Fenton-like activity in the pH range 5-9. The enhanced photocatalytic activity of ZnFe₂O₄-Cu3 could be because the formed ZnFe₂O₄/Cu₂O heterojunction improved the separation efficiency of the photogenerated carriers. The photogenerated hole was responsible for Orange II degradation. As for the Fenton-like reaction, ^•O₂^- was the active species, and the surface ≡Cu²⁺ with a higher redox ability should be the active site for H₂O₂ activation despite its lower surface content than that of ≡Cu⁺, ≡Fe²⁺, and ≡Fe³⁺. Finally, a possible pathway for Orange II degradation was proposed according to the liquid chromatography-mass spectrometry result.