Recent advances of organic emitters in deep-red light-emitting electrochemical cells

Light-emitting electrochemical cells (LECs) are kind of easily fabricated and low-cost light-emitting devices that can efficiently convert electric power to light energy. Compared with blue and green LECs, the performance of deep-red LECs is limited by the high non-radiative rate of emitters in long-wavelength region. While various organic emitters with deep-red emission have been developed to construct high-performance LECs, including polymers, metal complexes, and organic luminous molecules (OLMs), but this is seldom summarized. Therefore, we overview the recent advances of organic emitters with emission at the deep-red region for LECs, and specifically highlight the molecular design approach and electrochemiluminescence performance. We hope that this review can act as a reference for further research in designing high-performance deep-red LECs.

Long-Wavelength Light-Emitting Electrochemical Cells: Materials and Device Engineering

Long-wavelength light-emitting electrochemical cells (LECs) are potential deep-red and near infrared light sources with solution-processable simple device architecture, low-voltage operation, and compatibility with inert metal electrodes. Many scientific efforts have been made to material design and device engineering of the long-wavelength LECs over the past two decades. The materials designed the for long-wavelength LECs cover ionic transition metal complexes, small molecules, conjugated polymers, and perovskites. On the other hand, device engineering techniques, including spectral modification by adjusting microcavity effect, light outcoupling enhancement, energy down-conversion from color conversion layers, and adjusting intermolecular interactions, are also helpful in improving the device performance of long-wavelength LECs. In this review, recent advances in the long-wavelength LECs are reviewed from the viewpoints of materials and device engineering. Finally, discussions on conclusion and outlook indicate possible directions for future developments of the long-wavelength LECs. This review would like to pave the way for the researchers to design materials and device engineering techniques for the long-wavelength LECs in the applications of displays, bio-imaging, telecommunication, and night-vision displays.

Cationic Iridium(III) Complexes with Benzothiophene-Quinoline Ligands for Deep-Red Light-Emitting Electrochemical Cells

Three new cationic cyclometalated iridium(III) complexes equipped with differently substituted benzo[b]thiophen-2-ylquinoline cyclometalating ligands and with a sterically demanding tert-butyl-substituted 2,2'-bipyridine ancillary ligand were synthesized and structurally characterized by NMR and X-ray diffraction techniques. To tune the electronic properties of such complexes, the quinoline moiety of the cyclometalating ligands was kept pristine or equipped with electron-withdrawing phenyl and -CF₃ substituents, leading to complexes 1, 2, and 3, respectively. A complete electrochemical and photophysical investigation, supported by density functional theory calculations, permits a deep understanding of their electronic properties. The emission of all complexes arises from ligand-centered triplet states in the spectral range between 625 and 950 nm, with excited-state lifetimes between 2.10 and 6.32 μs at 298 K. The unsubstituted complex (1) exhibits the most blue-shifted emission in polymeric matrix at 298 K (λ_max = 667 nm, photoluminescence quantum yield (PLQY) = 0.25 and τ = 5.32 μs). The phenyl-substituted complex (2) displays the highest photoluminescent quantum yields (up to 0.30 in polymeric matrix), while the CF₃-substituted counterpart (3) shows the most red-shifted emission, peaking at approx. 720 nm, but with lower quantum yields (e.g., 0.10 in polymeric matrix at 298 K). Complexes 1 and 2 were tested in single-layer nondoped light-emitting electrochemical cells (LEECs), using a nozzle-printing technique; both devices display deep-red electroluminescence with an external quantum efficiency close to 20%.

High-Efficiency Deep-Red Light-Emitting Electrochemical Cell Based on a Trinuclear Ruthenium(II)-Silver(I) Complex

Turn-on time is a key factor for lighting devices to be of practical application. To decrease the turn-on time value of a deep-red light-emitting electrochemical cells (DR-LECs), two novel approaches based on molecularly engineered ruthenium phenanthroimidazole complexes were introduced. First, we found that with the incorporation of ionic methylpyridinium group to phenanthroimidazole ligand, the turn-on time of the DR-LECs device was dramatically reduced, from 79 to 27 s. By complexation of ruthenium emitter with Ag⁺, the turn-on time was improved by 85%, and the EQE of DR-device was increased from 0.62 to 0.71%. These results open a new avenue in decreasing the turn-on time without adding ionic electrolytes, leading to an efficient LEC.

The catalytic role of elemental sulfur in the DMSO-promoted oxidative coupling of methylhetarenes with amines: synthesis of thioamides and bis-aza-heterocycles

The S₈/DMSO combination was found to be particularly effective to promote oxidative coupling of methylhetarenes with amines to synthesize thioamides/bis-aza-heterocycles.

Recent Advances on Metal-Based Near-Infrared and Infrared Emitting OLEDs

During the past decades, the development of emissive materials for organic light-emitting diodes (OLEDs) in infrared region has focused the interest of numerous research groups as these devices can find interest in applications ranging from optical communication to defense. To date, metal complexes have been most widely studied to elaborate near-infrared (NIR) emitters due to their low energy emissive triplet states and their facile access. In this review, an overview of the different metal complexes used in OLEDs and enabling to get an infrared emission is provided.

Luminescent cis-Iridium(III) Complex Based on a Bis(6,7-dimethoxy-3,4-dihydroisoquinoline) Platform Featuring an Unusual cis Orientation of the C∧N Ligands: From a Theoretical Approach to a Deep Red LEEC Device

By pursuing the strategy of manipulating natural compounds to obtain functional materials, in this work, we report on the synthesis and characterization of a luminescent cationic iridium complex (cis-1), designed starting from the catecholic neurotransmitter dopamine, exhibiting the unusual cis arrangement of the C∧N ligands. Through an integrated experimental and theoretical approach, it was possible to delineate the optoelectronic properties of cis-1. In detail, (a) a series of absorption maxima in the range 300-400 nm was assigned to metal-to-ligand charge transfer and weak and broad absorption maxima at longer wavelengths (400-500 nm) were ascribable to spin-forbidden transitions with a mixed character; (b) there was an intense red phosphorescence with emission set in the range 580-710 nm; and (c) a highest occupied molecular orbital was mainly localized on the metal and the 2-phenylpiridine ligand and a lowest unoccupied molecular orbital was localized on the N∧N ligand, with a ΔH-L set at 2.20 eV. This investigation allowed the design of light-emitting electrochemical cell (LEEC) devices endowed with good performance. The poor literature reporting on the use of cis-iridium(III) complexes in LEECs prompted us to investigate the role played by the selected cathode and the thickness of the emitting layer, as well as the doping effect exerted by ionic liquids on the performance of the devices. All the devices exhibited a deep red emission, in some cases, quite near the pure color (devices #1, #4, and #8), expanding the panorama of the iridium-based red-to-near-infrared LEEC devices. The characteristics of the devices, such as the brightness reaching values of 162 cd/m2 for device #7, suggested that the performances of cis-1 are comparable to those of trans isomers, opening new perspective toward designing a new set of luminescent materials for optoelectronic devices.

A near infrared light emitting electrochemical cell with a 2.3 V turn-on voltage

We report on an organic electroluminescent device with simplified geometry and emission in the red to near infrared (NIR) spectral region which, has the lowest turn-on voltage value, 2.3 V, among light emitting electrochemical cells (LEECs). We have synthesized and characterized three novel ruthenium π-extended phenanthroimidazoles which differ on their N^N ligands. The use of dimethyl electron donating groups along with the π-extended phenanthroimidazole moiety promotes ambipolar transport thereby avoiding the use of additional charge transport layers. Furthermore, a facile cathode deposition method based on transfer of a molten alloy (Ga:In) on top of the active layer is deployed, thus avoiding high vacuum thermal deposition which adds versatile assets to our approach. We combine ambipolar charge transport organic complex design and a simple ambient cathode deposition to achieve a potentially cost effective red to NIR emitting device with outstanding performance, opening new avenues towards the development of simplified light emitting sources through device optimization.

Retracted Article: Facile preparation of bithiazole-based material for inkjet printed light-emitting electrochemical cell

Light-emitting electrochemical cell of bithiazole-based material was fabricated by solution processing rendered high external quantum efficiency over 12.8% and luminance of 1.8 10⁴ cd m⁻².

Light-emitting electrochemical cell of bithiazole-based material was fabricated by solution processing rendered high external quantum efficiency over 12.8% and luminance of 1.8 10⁴ cd m^−2.

Conjugated, rigidified bibenzimidazole ancillary ligands for enhanced photoluminescence quantum yields of orange/red-emitting iridium(iii) complexes

A family of six orange/red-emitting cationic iridium complexes were synthesized and their optoelectronic properties comprehensively characterized.

Cyclometalated N-heterocyclic carbene iridium(iii) complexes with naphthalimide chromophores: a novel class of phosphorescent heteroleptic compounds

A series of cyclometalated N-heterocyclic carbene complexes of the general formula [Ir(C^N)₂(C^C:)] has been prepared. Two sets of compounds were designed, those where (C^C:) represents a bidentate naphthalimide-substituted imidazolylidene ligand and (C^N) = ppy (3a), F2ppy (4a), bzq (5a) and those where (C^C:) represents a naphthalimide-substituted benzimidazolylidene ligand and (C^N) = ppy (3b), F2ppy (4b), bzq (5b). The naphthalimide-imidazole and naphthalimide-benzimidazole ligands 1a,b and the related imidazolium and benzimidazolium salts 2a,b were also prepared and fully characterized. The N-heterocyclic carbene Ir(iii) complexes have been characterized by NMR spectroscopy, cyclic voltammetry and elemental analysis. Moreover, the molecular structures of one imidazolium salt and four Ir(iii) complexes were determined by single-crystal X-ray diffraction. The structures provide us with valuable information, most notably the orientation of the naphthalimide chromophore with respect to the N-heterocyclic carbene moiety. All compounds are luminescent at room temperature and in a frozen solvent at 77 K, exhibiting a broad emission band that extends beyond 700 nm. The presence of the naphthalimide moiety changes the character of the lowest excited state from ³MLCT to ³LC, as corroborated by DFT and TD-DFT calculations. Remarkably, replacing imidazole with a benzimidazole unit improves the quantum yields of these compounds by decreasing the k_nr values which is an important feature for optimized emission performance. These studies provide valuable insights about a novel class of N-heterocyclic carbene-based luminescent complexes containing organic chromophores and affording metal complexes emitting across the red-NIR range.